From the Schnauzenorgan to the back: Morphological comparison of mormyromast electroreceptor organs at different skin regions of Gnathonemus petersii

The nocturnally active weakly electric fish Gnathonemus petersii is known to employ active electrolocation for the detection of objects and for orientation in its environment. The fish emits pulse‐type electric signals with an electric organ and perceives these signals with more than 3,000 epidermal electroreceptor organs, the mormyromasts, which are distributed over the animal's skin surface. In this study, we measured the metric dimensions of the mormyromasts from different body regions to find structural and functional specialization of the various body parts. We focused on the two foveal regions of G. petersii, which are located at the elongated and movable chin (the Schnauzenorgan; SO) and at the nasal region (NR), the skin region between the mouth and the nares. These two foveal regions were compared to the dorsal part (back) of the fish, which contains typical nonfoveal mormyromasts. While the gross anatomy of the mormyromasts from all skin regions is similar, the metric dimensions of the main substructures differed. The mormyromasts at the SO are the smallest and contain the smallest receptor cells. In addition, the number of receptor cells per organ is lowest at the SO. In contrast, at the back the biggest receptor organs with the highest amount of receptor cells per organ occur. The mormyromasts at the NR are in several respects intermediate between those from the back and the SO. However, mormyromasts at the NR are longer than those at all other skin regions, the canal leading from the receptor pore to the inner chambers were the longest and the overlaying epidermal layers are the thickest. These results show that mormyromasts and the epidermis they are embedded in at both foveal regions differ specifically from those found on the rest of the body. The morphological specializations lead to functional specialization of the two foveae. J. Morphol., 2012. © 2012 Wiley Periodicals, Inc.     

A matter of timing: System requirements for repair and their temporal dimensions

Research into repair within the circular economy (CE) typically focuses on technical aspects of design, policy, and markets, and often assumes simplified conditions for the user/owner and the product system to explain the barriers to scaling repair activities. However, factors occurring at pre-use stages of the product's life cycle can significantly influence whether, and to what extent, repair is viable or possible, that is, warranty duration, after-sale service provision, and access to necessities. The passing of time can directly and indirectly affect the ability, difficulty, and thus, the likelihood of repair activities being performed at each stage of the product's life cycle. Drawing from the literature and applying inductive systems-thinking tools, we propose a framework for considering the “System of Repairability.” We delineate how the passing of time (temporal dimensions) affects one's ‘‘ability to repair,’’ as a product progresses through different life cycle phases (i.e., breakdown vs. repair vs. disposal), and the point(s) at which the repair is considered or attempted (i.e., year of usage). By integrating life cycle and temporal (time-based) dimensions into a broad System of Repairability framework, we clarify relevant interconnections, iterations, sequences, and timing of decision points, stakeholders, and necessary conditions to facilitate an outcome of successful repair at the individual level, and thus intervention strategies for scaling repair within CE. We discuss how a policy mix can address the life cycle of products and the repair system more holistically. We conclude with a future outlook on how temporal dimensions can inform policy strategies and future research.     

Genetic and environmental variation in anther,pollen and pistil dimensions in sesame

Measurements of anther (length, width, depth), pollen grain (percent fertility, polar diameter, equatorial diameter, polar diameter/equatorial diameter ratio, volume) and pistil (stigma length, style length, ovary length, total pistil length, stigma width, style width, ovary width) were taken on 12 diverse sesame (Sesamum indicum L.) genotypes on each of four collection dates in 1994. Highly significant differences among genotype means were obtained for all characters except polar diameter. Highly significant differences among environment (collection date) means were found for ten of the 15 characters measured. Highly significant genotype x environment interactions were obtained for all characters except anther length. For the anther characters measured, relatively high repeatability values were found, ranging from 99.8% for length to 87.6% for depth. For the pollen grain characters measured, the repeatability values ranged from 67.6% for percent fertility to 23.1% for polar diameter. For the pistil characters measured, the repeatability values ranged from 94.0% for style width to 49.6% for total pistil length. These results indicate that genotype and environment influence anther, pollen grain and pistil characters. Variation in some of these morphological aspects could influence the consistency and interpretation of male transmission studies on both the applied and evolutionary levels.     

The sex difference in dimensional communalities in Macaca nemestrina.

Intr-individual correlations for cranial, mandibular and dental measurements made on lateral skull radiographs of Macaca nemestrina were systematically higher in 30 adult females than in 31 adult males by an average of 0.11 to 0.15, depending upon method of computation. Clearly, for the adult pig-tailed monkey as in Homo during both prenatal and postnatal life, developmental and dimensional communalities are systematically higher in the female indicating a general principle or trend.     

Sward height and bite size affect the functional response of barnacle geese Branta leucopsis

Intake rate, the rate in which herbivores can process their food, is presumed to be an important factor in habitat selection down to the scale of the foraging patch. Much attention has been given to the selection of swards of high nutritional quality, but much less has been given to the influences of sward structure on patch selection in small herbivores. In this study we tested the effects of sward density and height on the functional foraging response of barnacle geese, Branta leucopsis. The functional response curve for herbivores describes how intake rate is affected by food availability. We conducted feeding trials to determine intake rate and bite size of barnacle geese on experimentally manipulated swards. Results indicate that intake rate is mainly dependent on sward height and that there is a strong correlation between bite size and intake rate. Sward density does not influence the rate of food consumption; it is, however, a crucial parameter affecting potential total yield. We conclude that bite size is the crucial parameter influencing intake rate. Bite size is explained both by sward height and individual differences in bill morphology. Furthermore, intake rate seems to be dependent on the physical structure of the grass species consumed.     

The depth of Sooty Shearwater Ardenna grisea burrows varies with habitat and increases with competition for space

The Sooty Shearwater Ardenna grisea, an abundant but declining petrel, is one of many seabird species that construct breeding burrows, presumably because these confer protection from predators and the elements. Little is known about the causes of variation in Sooty Shearwater burrow architecture, which can differ markedly both within and between breeding sites. We hypothesize that burrow architecture varies in response to habitat type and competition for space. To address these hypotheses, we recorded Sooty Shearwater burrow dimensions on Kidney Island, the largest Sooty Shearwater colony in the Falkland Islands, South Atlantic, and modelled these as functions of burrow density (a proxy for competition) and habitat indices. Our models suggest that Sooty Shearwaters burrow further underground in response to competition for breeding space, and that soil underlying dense tussac grass Poa flabellata is more easily excavated than other substrates, indicating how vegetation restoration could aid the conservation of this species.     

小RNA病毒和小DNA病毒的三维结构模型

本文综述了小RNA病毒和小DNA病毒的主要结构特征,绘制出了它们的三维结构模型,从中找出了两者间的共同点和差异,为进一步研究两种病毒提供了依据。     

Sex determination of fetal and neonate skeletons by means of discriminant analysis

Facing the requirements of refined paleodemographical analyses, the access to the early ontogenetic sex ratio of skeletal populations is an important feature. Using raw data provided byFazekas & Kosa (1978) for a sample of known sex, discriminant functions are derived from hip and thigh bone dimensions that allow an almost unbiased classification of more than 70% of fetal and neonate individuals.     

An investigation on the simultaneously recorded occlusion contact and surface electromyographic activity for patients with unilateral temporomandibular disorders pain

The present study examined if unilateral pain from temporomandibular disorders (TMD) was associated with the occlusion contacts and surface electromyographic (SEMG) activities of jaw-closing muscles. Eleven patients with unilateral TMD pain and 20 healthy volunteers who all had Angle’s Class-I occlusions were enrolled. The numbers and load distributions of the occlusion contacts and the SEMG activities of the anterior temporalis (TA) muscles and masseters muscles (MM) during maximal voluntary clenching (MVC) in the centric and eccentric positions were simultaneously recorded on both sides. The pain was not associated with occlusal contact numbers or load distributions. The SEMG activities of the pain-side TA and bilateral MM were lower during centric MVC compared with controls. The SEMG activities of the non-pain-side TA and the normalized SEMG activities of the bilateral TAs and MMs were higher during protrusive MVC (p < 0.05). During pain-side MVC, the normalized SEMG activities of the working-side MM and balancing-side TA were higher than those of the controls. In conclusion, the TMD pain side was not associated with the occlusal contacts, but the patients with TMD had TA and MM SEMG activities during different tasks that differed from controls and that did not seem related to the pain side.     

A validation study of a new instrument for low cost bite force measurement

Quantitative assessment of force in masticatory muscles is not a routine clinical test, probably due to the lack of an “easy-to-use” device. Aim of this study is (1) to present a low cost bite force instrument located in a custom-made housing, designed to guarantee a comfortable and effective bite action, (2) to evaluate its mechanical characteristics, in order to implement it in clinical settings and in experimental setups.Linearity, repeatability and adaptation over time were assessed on a set of four different sensors in bare and housed condition. Application of the housing to the transducer may appreciably alter the transducer's response. Calibration of the housed transducer is thus necessary in order to correctly record real bite force. This solution may represent a low cost and reliable option for biting force measurement and objective assessment of individual force control in the scientific and clinical setting.