Seasonal variation in the chemical composition of the bioenergy feedstock Laminaria digitata for thermochemical conversion

To avoid negative impacts on food production, novel non-food biofuel feedstocks need to be identified and utilised. One option is to utilise marine biomass, notably fast-growing, large marine ‘plants’ such as the macroalgal kelps. This paper reports on the changing composition of Laminaria digitata throughout it growth cycle as determined by new technologies. The potential of Laminaria sp. as a feedstock for biofuel production and future biorefining possibilities was assessed through proximate and ultimate analysis, initial pyrolysis rates using thermo-gravimetric analysis (TGA), metals content and pyrolysis gas chromatography-mass spectrometry.Samples harvested in March contained the lowest proportion of carbohydrate and the highest ash and alkali metal content, whereas samples harvested in July contained the highest proportions of carbohydrate, lowest alkali metals and ash content. July was therefore considered the most suitable month for harvesting kelp biomass for thermochemical conversion to biofuels.     

Advances in thermochemical conversion of woody biomass to energy,fuels and chemicals

Biomass has been recognised as a promising resource for future energy and fuels. The biomass, originated from plants, is renewable and application of its derived energy and fuels is close to carbon-neutral by considering that the growing plants absorb CO₂ for photosynthesis. However, the complex physical structure and chemical composition of the biomass significantly hinder its conversion to gaseous and liquid fuels.This paper reviews recent advances in biomass thermochemical conversion technologies for energy, liquid fuels and chemicals. Combustion process produces heat or heat and power from the biomass through oxidation reactions; however, this is a mature technology and has been successfully applied in industry. Therefore, this review will focus on the remaining three thermochemical processes, namely biomass pyrolysis, biomass thermal liquefaction and biomass gasification. For biomass pyrolysis, biomass pretreatment and application of catalysts can simplify the bio-oil composition and retain high yield. In biomass liquefaction, application of appropriate solvents and catalysts improves the liquid product quality and yield. Gaseous product from biomass gasification is relatively simple and can be further processed for useful products. Dual fluidised bed (DFB) gasification technology using steam as gasification agent provides an opportunity for achieving high hydrogen content and CO₂ capture with application of appropriate catalytic bed materials. In addition, multi-staged gasification technology, and integrated biomass pyrolysis and gasification as well as gasification for poly-generation have attracted increasing attention.     

Influence of pyrolysis condition on switchgrass bio-oil yield and physicochemical properties

The poor and inconsistent physicochemical properties of bio-oil are inhibiting its industrialized production. We investigated the variability in properties of switchgrass bio-oil produced at three pyrolysis temperatures (T = 450, 500, and 550 °C) and three feedstock moisture contents (MC = 5%, 10%, and 15%) in a 3 × 3 factorial experiment in order to exploit opportunities to improve bio-oil properties through optimization of pyrolysis parameters. Results showed that even with the single type of feedstock and pyrolysis system, the two main factors and their interaction caused large variations in bio-oil yield and most of the measured physicochemical properties. Following improvements of bio-oil properties could be individually achieved by selecting an optimal pyrolysis condition (shown in parenthesis) comparing with the worst case: increase of bio-oil yield by more than twofold (MC = 10%, T = 450 °C), increase of pH by 20.4% from 2.74 to 3.3 (MC = 10%, T = 550 °C), increase of higher heating value by 18.1% from 16.6 to 19.6 MJ/kg (MC = 10%, T = 450 °C), decrease of density by 5.9% from 1.18 to 1.11 g/cm³ (MC = 5%, T = 550 °C), decrease of water content by 36% from 31.4 to 20.1 wt.% (MC = 5%, T = 450 °C), decrease of viscosity by 40% from 28.2 to 17 centistokes (MC = 5%, T = 550 °C), decrease of solid content by 57% from 2.86 to 1.23 wt.% (MC = 15%, T = 550 °C), and decrease of ash content by 41.9% from 0.62 to 0.36 wt.% (MC = 15%, T = 550 °C). There is no single, clear-cut optimal condition that can satisfy the criteria for a bio-oil product with all the desired properties. Trade-offs should be balanced according to the usage of the end-products.     

Properties of oil and char derived from slow pyrolysis of Tetraselmis chui

Pyrolysis of biomass is a means to industrially manufacture renewable oil and gas, in addition to biochar for soil amendment and long-term carbon fixation. In this work, oil and char derived from the slow pyrolysis of the unicellular marine diatom Tetraselmis chui are analysed using a variety of techniques. The pyrolytic oil fraction exhibits a wide variety of fatty acids, alkanes, alkenes, amides, aldehydes, terpenes, pyrrolidinines, phytol and phenols, with a high heating value (HHV) of 28 MJ/kg. The biochar produced has a HHV of 14.5 MJ/kg and reveals a number of properties that are potentially valuable from an agronomic point of view, including high cation exchange capacity (CEC), large concentration of N, and a low C:N ratio. The quantity of C in T. chui biochar that can be expected to stabilise in soil amounts to approximately 9%/wt of the original feedstock, leading to a potential net reduction in atmospheric CO₂.     

Steam reforming of bio-oil from rice husks fast pyrolysis for hydrogen production

Steam reforming of two kinds of bio-oil from rice husks fast pyrolysis was conducted for hydrogen production at three temperatures (650, 750 and 850 °C) with Ni-based catalyst in a fixed-bed reactor. The gas composition and organic compounds in liquid condensate were detected by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS), respectively. In addition, the carbon deposition was also investigated. The results showed that the mole fraction range of hydrogen was within 55.8-61.3% at all temperatures and more hydrogen was produced at the higher temperature. The highest H? efficiency of bio-oil steam reforming was 45.33% when extra water was added. The bio-oil with lower content of chemical compounds has a higher H? efficiency, but its hydrogen volume was less. Analysis of the liquid condensate showed that most of the organic compounds were circularity compounds. The carbon deposition can decrease the bio-oil conversion, and it was easier to form at the temperature of 750 °C.     

Pyrolysis of grape bagasse: effect of pyrolysis conditions on the product yields and characterization of the liquid product

In this study, pyrolysis of grape bagasse was investigated with the aim to study the product distribution and their chemical compositions and to identify optimum process conditions for maximizing the bio-oil yield. Particular investigated process variables were temperature (350-600 °C), heating rate (10-50 °C/min) and nitrogen gas flow rate (50-200 cm³/min). The maximum oil yield of 27.60% was obtained at the final pyrolysis temperature of 550 °C, sweeping gas flow rate of 100 cm³/min and heating rate of 50 °C/min in a fixed-bed reactor. The elemental analysis and heating value of the bio-oils were determined, and then the chemical composition of the bio-oil was investigated using chromatographic and spectroscopic techniques such as column chromatography, ¹H NMR and FTIR. The fuel properties of the bio-oil such as flash point, viscosity and density were also determined. The bio-oils obtained from grape bagasse were presented as an environmentally friendly feedstock candidate for bio-fuels.     

Potential yields and properties of oil from the hydrothermal liquefaction of microalgae with different biochemical content

A range of model biochemical components, microalgae and cyanobacteria with different biochemical contents have been liquefied under hydrothermal conditions at 350 °C, ∼200 bar in water, 1 M Na₂CO₃ and 1 M formic acid. The model compounds include albumin and a soya protein, starch and glucose, the triglyceride from sunflower oil and two amino acids. Microalgae include Chlorella vulgaris,Nannochloropsis occulata and Porphyridium cruentum and the cyanobacteria Spirulina. The yields and product distribution obtained for each model compound have been used to predict the behaviour of microalgae with different biochemical composition and have been validated using microalgae and cyanobacteria. Broad agreement is reached between predictive yields and actual yields for the microalgae based on their biochemical composition. The yields of bio-crude are 5-25 wt.% higher than the lipid content of the algae depending upon biochemical composition. The yields of bio-crude follow the trend lipids > proteins > carbohydrates.     

Upgrading of high-boiling fraction of bio-oil in supercritical methanol

In this work, the upgrading reactions of high-boiling fraction (HBF) of bio-oil were carried out over a series of supported mono- and bi-metallic catalysts under the supercritical methanol condition. During these reactions, esterification and cracking (alcoholysis and hydrocracking) were the two dominant processes. PtNi/MgO exhibited good performance, and gave a high yield (72.4 wt.%) of refined oil. The acid-base properties of the supports have an important effect on the coke deposition on the catalyst surface. The acidic catalysts gave the somewhat lower product yields, but tended to inhibit coking reaction. This would improve the life of the catalysts in the practical applications. The refined oil is believed to be a potential substitute or partial substitute for the fossil transportation fuel.     

In-situ upgrading of biomass pyrolysis vapors: catalyst screening on a fixed bed reactor

In-situ catalytic upgrading of biomass fast pyrolysis vapors was performed in a fixed bed bench-scale reactor at 500 °C, for catalyst screening purposes. The catalytic materials tested include a commercial equilibrium FCC catalyst (E-cat), various commercial ZSM-5 formulations, magnesium oxide and alumina materials with varying specific surface areas, nickel monoxide, zirconia/titania, tetragonal zirconia, titania and silica alumina. The bio-oil was characterized measuring its water content, the carbon-hydrogen-oxygen (by difference) content and the chemical composition of its organic fraction. Each catalytic material displayed different catalytic effects. High surface area alumina catalysts displayed the highest selectivity towards hydrocarbons, yielding however low organic liquid products. Zirconia/titania exhibited good selectivity towards desired compounds, yielding higher organic liquid product than the alumina catalysts. The ZSM-5 formulation with the highest surface area displayed the most balanced performance having a moderate selectivity towards hydrocarbons, reducing undesirable compounds and producing organic liquid products at acceptable yields.     

Optimization of a free-fall reactor for the production of fast pyrolysis bio-oil

A central composite design of experiments was performed to optimize a free-fall reactor for the production of bio-oil from red oak biomass. The effects of four experimental variables including heater set-point temperature, biomass particle size, sweep gas flow rate and biomass feed rate were studied. Heater set-point temperature ranged from 450 to 650 °C, average biomass particle size from 200 to 600 μm, sweep gas flow rate from 1 to 5 sL/min and biomass feed rate from 1 to 2 kg/h. Optimal operating conditions yielding over 70 wt.% bio-oil were identified at a heater set-point temperature of 575 °C, while feeding red oak biomass sized less than 300 μm at 2 kg/h into the 0.021 m diameter, 1.8 m tall reactor. Sweep gas flow rate did not have significant effect on bio-oil yield over the range tested.