Initial steps in the degradation of benzene sulfonic acid, 4-toluene sulfonic acids,and orthanilic acid in Alcaligenes sp. strain O-1

Alcaligenes sp. strain O-1 grew with benzene sulfonate (BS) as sole carbon source for growth with either NH₄ ⁺ or NH₄ ⁺ plus orthanilate (2-aminobenzene sulfonate, OS) as the source(s) of nitrogen. The intracellular desulfonative enzyme did not degrade 3- or 4-aminobenzene sulfonates in the medium, although the enzyme in cell extracts degraded these compounds. We deduce the presence of a selective permeability barrier to sulfonates and conclude that the first step in sulfonate metabolism is transport into the cell. Cell-free desulfonation of BS in standard reaction mixtures required 2 mol of O₂ per mol. One mol of O₂ was required for a catechol 2,3-dioxygenase. When meta ring cleavage was inhibited with 3-chlorocatechol in desalted extracts, about 1 mol each of O₂ and of NAD(P)H per mol of BS were required for the reaction, and SO₃ ^2- and catechol were recovered in high yield. Catechol was shown to be formed by dioxygenation in an experiment involving ¹⁸O₂. 4-Toluene sulfonate was subject to NAD(P)H-dependent dioxygenation to yield SO₃ ^2- and 4-methylcatechol, which was subject to meta cleavage. OS also required 2 mol of O₂ per mol and NAD(P)H for degradation, and SO₃ ^2- and NH₄ ⁺ were recovered quantitatively. Inhibition of ring cleavage with 3-chrorocatechol reduced the oxygen requirement to 1 mol per mol of OS SO₃ ^2- (1 mol) and an unidentified organic intermediate, but no NH₄ ⁺, were observed.     

The influence of locomotor training on dynamic balance during steady-state walking post-stroke

Slow walking speed and lack of balance control are common impairments post-stroke. While locomotor training often improves walking speed, its influence on dynamic balance is unclear. The goal of this study was to assess the influence of a locomotor training program on dynamic balance in individuals post-stroke during steady-state walking and determine if improvements in walking speed are associated with improved balance control. Kinematic and kinetic data were collected pre- and post-training from seventeen participants who completed a 12-week locomotor training program. Dynamic balance was quantified biomechanically (peak-to-peak range of frontal plane whole-body angular-momentum) and clinically (Berg-Balance-Scale and Dynamic-Gait-Index). To understand the underlying biomechanical mechanisms associated with changes in angular-momentum, foot placement and ground-reaction-forces were quantified. As a group, biomechanical assessments of dynamic balance did not reveal any improvements after locomotor training. However, improved dynamic balance post-training, observed in a sub-group of 10 participants (i.e., Responders), was associated with a narrowed paretic foot placement and higher paretic leg vertical ground-reaction-force impulse during late stance. Dynamic balance was not improved post-training in the remaining seven participants (i.e., Non-responders), who did not alter their foot placement and had an increased reliance on their nonparetic leg during weight-bearing. As a group, increased walking speed was not correlated with improved dynamic balance. However, a higher pre-training walking speed was associated with higher gains in dynamic balance post-training. These findings highlight the importance of the paretic leg weight bearing and mediolateral foot placement in improving frontal plane dynamic balance post-stroke.     

Maximising forward somersault rotation in springboard diving

Performance in the flight phase of springboard diving is limited by the amounts of linear and angular momentum generated during the takeoff phase. A planar 8-segment torque-driven simulation model combined with a springboard model was used to investigate optimum takeoff technique for maximising rotation in forward dives from the one metre springboard. Optimisations were run by varying the torque activation parameters to maximise forward rotation potential (angular momentum × flight time) while allowing for movement constraints, anatomical constraints, and execution variability. With a constraint to ensure realistic board clearance and anatomical constraints to prevent joint hyperextension, the optimised simulation produced 24% more rotation potential than a simulation matching a 2½ somersault piked dive. When 2 ms perturbations to the torque onset timings were included for the ankle, knee and hip torques within the optimisation process, the model was only able to produce 87% of the rotation potential achieved in the matching simulation. This implies that a pre-planned technique cannot produce a sufficiently good takeoff and that adjustments must be made during takeoff. When the initial onset timings of the torque generators were unperturbed and 10 ms perturbations were introduced into the torque onset timings in the board recoil phase, the optimisation produced 8% more rotation potential than the matching simulation. The optimised simulation had more hip flexion and less shoulder extension at takeoff than the matching simulation. This study illustrates the difficulty of including movement variability within performance optimisation when the movement duration is sufficiently long to allow feedback corrections.     

Isolation and Characterization of Dibenzofuran-Degrading <Emphasis Type="Italic">Serratia marcescens</Emphasis> from Alkalophilic Bacterial Consortium of the Chemostat

Alkalophilic bacterial consortium developed by continuous enrichment in the chemostat in presence of 4-chlorosalicylic acid as sole source of carbon and energy contained six bacterial strains, Micrococcus luteus (csa101), Deinococcus radiothilus (csa102), csa103 (Burkholderia gladioli), Alloiococcus otilis (csa104), Micrococcus diversus (csa105), Micrococcus luteus (csa106), identified by the Biolog test method. The strains were tested for utilization of organic compounds in which one of the strains (csa101) had higher potency to utilize dibenzofuran (DF) as sole carbon and energy source identified as Serratia marcescens on the basis of 16S rDNA. The degradation of DF by bacterial strain proceeded through an oxidative route as indicated by 2,2′3-trihydroxybiphenyl, 2-hydroxy-6-(2-hydroxyphenyl)-6-oxo-2,4-hexadienoic acid, salicylic acid, and catechol, which was identified by gas chromatography–mass spectrometry.     

Synthesis, structure, and magnetic properties of dinuclear nickel(II) complexes with a phenol-based dinucleating ligand with four methoxyethyl chelating arms

Dinuclear nickel(II) complexes [Ni₂(bomp)(MeCO₂)₂]BPh₄ (1) and [Ni₂(bomp)(PhCO₂)₂]BPh₄ (2) were synthesized with the dinucleating ligand 2,6-bis[bis(2-methoxyethyl)aminomethyl]-4-methylphenol [H(bomp)]. X-Ray analysis revealed that the complex 1 · 0.5CHCl₃ contains two nickel(II) ions bridged by phenolic oxygen and two acetate groups, forming a μ-phenoxo-bis(μ-acetato)dinickel(II) core. Electronic spectra were investigated for 1 and 2 in the range of 400-1800 nm, and the data were typical for the octahedral high-spin nickel(II) complexes. Obtained spectral components were well simulated based on the angular overlap model assuming the trigonally distorted octahedral geometry. Magnetic susceptibility was measured for 1 and 2 over a temperature range of 4.5-300 K. The optimized magnetic data were J = 1.75 cm⁻¹, zJ′ = −0.234 cm⁻¹, g = 2.21, D = 15.1 cm⁻¹, and TIP = 370 × 10⁻⁶ cm⁻¹ for complex 1 and J = 3.55 cm⁻¹, zJ′ = −0.238 cm⁻¹, g = 2.23, D = 21.8 cm⁻¹, and TIP = 470 × 10⁻⁶ cm⁻¹ for complex 2. The data revealed ferromagnetic interactions between the two nickel(II) ions.     

Electronic spectral studies of dinuclear Cobalt(II) complexes with a phenol-based dinucleating ligand containing four methoxyethyl chelating arms

The electronic spectra of dinuclear cobalt(II) complexes [Co₂(bomp)(MeCO₂)₂]BPh₄ (1) and [Co₂(bomp)(PhCO₂)₂]BPh₄ (2) were studied [H(bomp): 2,6-bis[bis(2-methoxyethyl)aminomethyl]-4-methylphenol]; the spectral components obtained by Gaussian curve analysis were well simulated based on the angular overlap model using the aomx program. The first transition band ⁴T₁ → ⁴T₂(⁴F) of an octahedral high-spin cobalt(II) complex was found to be sensitive to the distortion around the cobalt(II) ion.     

Degradation of carbazole and its derivatives by a Pseudomonas sp.

Carbazole, carbazoles with monomethyl or dimethyls substituted on different positions (C₁-carbazoles or C₂-carbazoles), and benzocarbazoles, as toxic and mutagenic components of petroleum and creosote contamination, were biodegradable by an isolated bacterial strain Pseudomonas sp. XLDN4-9. C₁-carbazoles were degraded in preference to carbazole and C₂-carbazoles. The biodegradation of C₁-carbazoles or C₂-carbazoles was influenced by the positions of methyl substitutions. Among C₁-carbazole isomers, 1-methyl carbazole was the most susceptible. C₂-carbazole isomers with substitutions on the same benzo-nucleus were more susceptible at a concentration of less than 3.4 μg g⁻¹ petroleum, especially when harboring one substitution on position 1. In particular, 1,5-dimethyl carbazole was the most recalcitrant dimethyl isomer.     

Structural and spectroscopic studies of a model for catechol oxidase

A binuclear copper complex, [Cu₂(BPMP)(OAc)₂][ClO₄]·H₂O, has been prepared using the binucleating ligand 2,6-bis[bis(pyridin-2-ylmethylamino)methyl]-4-methylphenol (H-BPMP). The X-ray crystal structure reveals the copper centers to have a five-coordinate square pyramidal geometry, with the acetate ligands bound terminally. The bridging phenolate occupies the apical position of the square-based pyramids and magnetic susceptibility, electron paramagnetic resonance (EPR) and variable-temperature variable-field magnetic circular dichroism (MCD) measurements indicate that the two centers are very weakly antiferromagnetically coupled (J = −0.6 cm⁻¹). Simulation of the dipole–dipole-coupled EPR spectrum showed that in solution the Cu–O–Cu angle was increased from 126° to 160° and that the internuclear distance was larger than that observed crystallographically. The high-resolution spectroscopic information obtained has been correlated with a detailed ligand-field analysis to gain insight into the electronic structure of the complex. Symmetry arguments have been used to demonstrate that the sign of the MCD is characteristic of the tetragonally elongated environment. The complex also displays catecholase activity (k _cat = 15 ± 1.5 min⁻¹, K _M = 6.4 ± 1.8 mM), which is compared with other dicopper catechol oxidase models. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

On the evaluation of edgeless diode detectors for patient-specific QA in high-dose stereotactic radiosurgery

PurposeIn this work, the potential of an innovative “edgeless” silicon diode was evaluated as a response to the still unmet need of a reliable tool for plan dosimetry verification of very high dose, non-coplanar, patient-specific radiosurgery treatments. In order to prove the effectiveness of the proposed technology, we focused on radiosurgical treatments for functional disease like tremor or pain.MethodsThe edgeless diodes response has been validated with respect to clinical practice standard detectors by reproducing the reference dosimetry data adopted for the Treatment Planning System. In order to evaluate the potential for radiosurgery patient-specific treatment plan verification, the anthropomorphic phantom Alderson RANDO has been adopted along with three edgeless sensors, one placed in the centre of the Planning Target Volume, one superiorly and one inferiorly.ResultsThe reference dosimetry data obtained from the edgeless detectors are within 2.6% for output factor, off-axis ratio and well within 2% for tissue phantom ratio when compared to PTW 60,018 diode. The edgeless detectors measure a dose discrepancy of approximately 3.6% from the mean value calculated by the TPS. Larger discrepancies are obtained in very steep gradient dose regions when the sensors are placed outside the PTV.ConclusionsThe angular independent edgeless diode is proposed as an innovative dosimeter for patient quality assurance of brain functional disorders and other radiosurgery treatments. The comparison of the diode measurements with TPS calculations confirms that edgeless diodes are suitable candidates for patient-specific dosimetric verification in very high dose ranges delivered by non-isocentric stereotactic radiosurgery modalities.