A method for surveying and classifying Leuconostoc spp. glucansucrases according to strain-dependent acceptor product patterns

A number of Leuconostoc spp. strains were screened for their ability to produce glucansucrases and carry out acceptor reactions with maltose. Acceptor products were analyzed by thin-layer chromatography (TLC) and it was discovered that they could be grouped into four distinct categories based on oligosaccharide product patterns. These patterns corresponded with structural features of the dextrans each strain is reported to produce. Strains that produced a typical dextran—characterized by a predominantly linear (16)-linked d-glucan chain with a low to moderate degree of branching—produced a homologous series of isomaltooligosaccharides via acceptor reactions. Strains that produced dextrans with moderate to high levels of (12) branch points, exemplified by NRRL B-1299, synthesized the same isomaltodextrins as well as another series of oligosaccharides migrating slightly faster in our TLC system. Strains that produced dextrans with higher levels of (13)-branches, such as NRRL B-742, synthesized isomaltodextrins plus a series of oligosaccharides that migrated slightly more slowly on TLC. And finally, strains known to produce alternansucrase produced isomaltodextrins plus oligoalternans. Within a given type, variability exists in the relative proportions of each product. The data presented here may be useful in selecting strains for the production of specific types of oligosaccharides, for example as prebiotics.     

Penta-, hexa-, and heptasaccharide acceptor products of alternansucrase

In the presence of suitable acceptor molecules, dextransucrase makes a homologous series of oligosaccharides in which the isomers differ by a single glucosyl unit, whereas alternansucrase synthesizes one trisaccharide, two tetrasaccharides, etc. For the example of maltose as the acceptor, if one considers only the linear, unbranched possibilities for alternansucrase, the hypothetical number of potential products increases exponentially as a function of the degree of polymerization (DP). Experimental evidence indicates that far fewer products are actually formed. We show that only certain isomers of DP >4 are formed from maltose in measurable amounts, and that these oligosaccharides belong to the oligoalternan series rather than the oligodextran series. When the oligosaccharide acceptor products from maltose were separated by size-exclusion chromatography and HPLC, only one pentasaccharide was isolated. Its structure was alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->4)-D-Glc. Two hexasaccharides were formed in approximately equal quantities: alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->4)-D-Glc and alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->4)-D-Glc. Just one heptasaccharide was isolated from the reaction mixture, alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->4)-D-Glc. We conclude that the enzyme is incapable of forming two consecutive alpha-(1-->3) linkages, and does not form products with more than two consecutive alpha-(1-->6) linkages. The distribution of products may be kinetically determined.     

Acceptor products of alternansucrase with gentiobiose. Production of novel oligosaccharides for food and feed and elimination of bitterness

In the presence of suitable acceptor molecules, dextransucrase makes a homologous series of oligosaccharides in which the isomers differ by a single glucosyl unit, whereas alternansucrase synthesizes one trisaccharide, two tetrasaccharides, etc. Previously, we showed that alternansucrase only forms certain isomers of DP > 4 from maltose in measurable amounts, and that these oligosaccharides belong to the oligoalternan series rather than the oligodextran series. We now demonstrate that the acceptor products from gentiobiose, also formed in good yields (nearly 90% in unoptimized reactions), follow a pattern similar to those formed from maltose. The initial product is a single trisaccharide, α-d-Glcp-(1→6)-β-d-Glcp-(1→6)-d-Glc. Two tetrasaccharides were formed in approximately equal quantities: α-d-Glcp-(1→3)-α-d-Glcp-(1→6)-β-d-Glcp-(1→6)-d-Glc and α-d-Glcp-(1→6)-α-d-Glcp-(1→6)-β-d-Glcp-(1→6)-d-Glc. Just one pentasaccharide was isolated from the reaction mixture, α-d-Glcp-(1→6)-α-d-Glcp-(1→3)-α-d-Glcp-(1→6)-β-d-Glcp-(1→6)-d-Glc. Our hypothesis that the enzyme is incapable of forming two consecutive α-(1→3) linkages, and does not form products with more than two consecutive α-(1→6) linkages, apparently applies to other acceptors as well as to maltose. The glucosylation of gentiobiose reduces or eliminates its bitter taste.     

Sequence analysis of the gene encoding alternansucrase, a sucrose glucosyltransferase from Leuconostoc mesenteroides NRRL B-1355

The gene encoding alternansucrase (ASR) from Leuconostoc mesenteroides NRRL B-1355, an original sucrose glucosyltransferase (GTF) specific to alternating alpha-1,3 and alpha-1,6 glucosidic bond synthesis, was cloned, sequenced and expressed into Escherichia coli. Recombinant enzyme catalyzed oligoalternan synthesis from sucrose and maltose acceptor. From sequence comparison, it appears that ASR possesses the same domains as those described for GTFs specific to either contiguous alpha-1,3 osidic bond or contiguous alpha-1,6 osidic bond synthesis. However, the variable region and the glucan binding domain are longer than in other GTFs (by 100 and 200 amino acids respectively). The N-catalytic domain which presents 49% identity with the other GTFs from L. mesenteroides possesses the three determinants potentially involved in the glucosyl enzyme formation.     

Alternansucrase acceptor reactions with D-tagatose and L-glucose

Alternansucrase (EC 2.4.1.140) is a d-glucansucrase that synthesizes an alternating alpha-(1-->3), (1-->6)-linked d-glucan from sucrose. It also synthesizes oligosaccharides via d-glucopyranosyl transfer to various acceptor sugars. Two of the more efficient monosaccharide acceptors are D-tagatose and L-glucose. In the presence of d-tagatose, alternansucrase produced the disaccharide alpha-d-glucopyranosyl-(1-->1)-beta-D-tagatopyranose via glucosyl transfer. This disaccharide is analogous to trehalulose. We were unable to isolate a disaccharide product from L-glucose, but the trisaccharide alpha-D-glucopyranosyl-(1-->6)-alpha-d-glucopyranosyl-(1-->4)-l-glucose was isolated and identified. This is analogous to panose, one of the structural units of pullulan, in which the reducing-end D-glucose residue has been replaced by its L-enantiomer. The putative L-glucose disaccharide product, produced by glucoamylase hydrolysis of the trisaccharide, was found to be an acceptor for alternansucrase. The disaccharide, alpha-D-glucopyranosyl-(1-->4)-L-glucose, was a better acceptor than maltose, previously the best known acceptor for alternansucrase. A structure comparison of alpha-D-glucopyranosyl-(1-->4)-L-glucose and maltose was performed through computer modeling to identify common features, which may be important in acceptor affinity by alternansucrase.     

Glucosylation of raffinose via alternansucrase acceptor reactions

The glucansucrase known as alternansucrase [EC 2.4.1.140] can transfer glucosyl units from sucrose to raffinose to give good yields of oligosaccharides, which may serve as prebiotics. The main products were the tetrasaccharides α-d-Glcp-(1→3)-α-d-Galp-(1→6)-α-d-Glcp-(1↔2)-β-d-Fruf and α-d-Glcp-(1→4)-α-d-Galp-(1→6)-α-d-Glcp-(1↔2)-β-d-Fruf in ratios ranging from 4:1 to 9:1, along with lesser amounts of α-d-Glcp-(1→6)-α-d-Galp-(1→6)-α-d-Glcp-(1↔2)-β-d-Fruf. Ten unusual pentasaccharide structures were isolated. Three of these arose from glucosylation of the major tetrasaccharide product, two each from the minor tetrasaccharides, and three were the result of glucosylations of the fructose acceptor product leucrose or isomaltulose. The major pentasaccharide product arose from glucosylation of the major tetrasaccharide at position 4 of the fructofuranosyl unit, to give a subunit structure analogous to that of maltulose. A number of hexasaccharides and higher oligosaccharides were also produced. Unlike alternansucrase, dextransucrase [EC 2.4.1.5] gave only a single tetrasaccharide product in low yield, and no significant amounts of higher oligosaccharides. The tetrasaccharide structure from dextransucrase was found to be α-d-Glcp-(1→4)-α-d-Galp-(1→6)-α-d-Glcp-(1↔2)-β-d-Fruf, which is at odds with the previously published structure.     

Alternansucrase acceptor reactions with methyl hexopyranosides

Alternansucrase (EC 2.4.1.140, sucrose: (1-->6), (1-->3)-alpha-D-glucan 6(3)-alpha-D-glucosyltransferase) is a D-glucansucrase that synthesizes an alternating alpha-(1-->3), (1-->6)-linked D-glucan from sucrose. It also synthesizes oligosaccharides via D-glucopyranosyl transfer to various acceptor sugars. We have studied the acceptor products arising from methyl glycosides as model compounds in order to better understand the specificity of alternansucrase acceptor reactions. The initial product arising from methyl beta-D-glucopyranoside was methyl beta-isomaltoside, which was subsequently glucosylated to yield methyl beta-isomaltotrioside and methyl alpha-D-glucopyranosyl-(1-->3)-alpha-D-glucopyranosyl-(1-->6)-beta-D-glucopyranoside. These products are analogous to those previously described from methyl alpha-D-glucopyranoside. The major initial acceptor product from methyl alpha-D-mannopyranoside was methyl alpha-D-glucopyranosyl-(1-->6)-alpha-D-mannopyranoside, but several minor products were also isolated and characterized, including a 3,6-di-O-substituted mannopyranoside. Methyl alpha-D-galactopyranoside yielded two initial products, methyl alpha-D-glucopyranosyl-(1-->3)-alpha-D-galactopyranoside and methyl alpha-D-glucopyranosyl-(1-->4)-alpha-D-galactopyranoside, in a 2.5:1 molar ratio. Methyl D-allopyranosides were glucosylated primarily at position 6, yielding methyl alpha-D-glucopyranosyl-(1-->6)-D-allopyranosides. The latter subsequently gave rise to methyl alpha-D-glucopyranosyl-(1-->6)-alpha-D-glucopyranosyl-(1-->6)-D-allopyranosides. In general, the methyl alpha-D-hexopyranosides were better acceptors than the corresponding beta-glycosides.     

Location of repeat elements in glucansucrases of Leuconostoc and Streptococcus species

Glucosyltransferases of oral streptococci, dextransucrases and alternansucrase of Leuconostoc mesenteroides, collectively referred to as glucansucrases, are large extracellular enzymes that synthesise glucans with a variety of structures and properties. A characteristic of all these glucansucrases is the possession of a C-terminal domain consisting of a series of tandem amino acid repeats. These repeat units are thought to interact with glucan but closely resemble the cell wall binding domain motif found in choline binding proteins in Streptococcus pneumoniae and surface-located proteins in a range of other bacteria. Analysis of dextransucrase and alternansucrase sequences has now shown that they also contain these repeat motifs in the N-terminal region, raising questions about their evolutionary origin and functional importance.     

Glucosylation of alpha-butyl- and alpha-octyl-D-glucopyranosides by dextransucrase and alternansucrase from Leuconostoc mesenteroides

For the first time, glucosylation of alpha-butyl- and alpha-octylglucopyranoside was achieved using dextransucrase (DS) of various specificities, and alternansucrase (AS) from Leuconostoc mesenteroides. All the glucansucrases (GS) tested used alpha-butylglucopyranoside as acceptor; in particular, DS produced alpha-D-glucopyranosyl-(1-->6)-O-butyl-alpha-D-glucopyranoside and alpha-D-glucopyranosyl-(1-->6)-alpha-D-glucopyranosyl-(1-->6)-O-butyl-alpha-D-glucopyranoside. In contrast, alpha-octylglucopyranoside was glucosylated only by AS which was shown to be the most efficient catalyst. The conversion rates, obtained with this enzyme at sucrose to acceptor molar ratio of 2:1 reached 81 and 61% for alpha-butylglucopyranoside and alpha-octylglucopyranoside, respectively. Analyses obtained from liquid chromatography coupled with mass spectrometry revealed that different series of alpha-alkylpolyglucopyranosides regioisomers of increasing polymerization degree can be formed depending on the specificity of the catalyst.