Synthesis of novel acetylene-containing amino acids

Summary.  Novel synthetic procedures for the modification of non-proteinogenic acetylene-containing amino acids have been developed. The functionalization either proceeds via zinc/copper-mediated introduction of alkyl substituents, or via tungsten-catalyzed ring-closing alkyne metathesis reactions. Received March 28, 2002 Accepted October 3, 2002 Published online December 18, 2002 Acknowledgements These investigations are supported (in part) by the Netherlands Research Council for Chemical Sciences (CW) with financial aid from the Netherlands Technology Foundation (STW). Authors' address: Floris P. J. T. Rutjes, Prof. Dr., Department of Organic Chemistry, University of Nijmegen, Toernooiveld 1, NL-6525 ED Nijmegen, The Netherlands, E-mail: rutjes@sci.kun.nl  2, selected data: ¹H NMR (300 MHz, CDCl₃) δ 5.32 (d, J = 7.7 Hz, 1H), 4.44–4.40 (m, 1H), 3.76 (s, 3H), 2.75–2.73 (d, J = 5.0 Hz, 2H), 1.44 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.0, 155.0, 80.3, 74.6, 52.6, 51.9, 41.7, 28.3, 24.0; mp = 55°C.  Typical procedure for 5: zinc dust (116 mg, 1.408 mmol) was weighed into a 20 mL flask, which was repeatedly evacuated (with heating using a heat gun) and flushed with argon. Dry DMF (0.5 mL, distilled from CaH₂) and 1,2-dibromoethane (9.2 μL, 0.106 mmol) were added and the flask was heated at 80°C for 40 min. The reaction mixture was allowed to cool to room temperature, trimethylsilyl chloride (4 μL, 0.035 mmol) was added and the resulting mixture was stirred vigorously for a further 30 min under argon. Iodocyclohexane (69 μl, 0.528 mmol) was added and stirred at room temperature for 3 h more after which stirring was ceased to settle the zinc. CuCN (41 mg, 0.458 mmol) and LiCl (40 mg, 0.915 mmol) were heated to 150°C for 2 h and cooled to room temperature. Addition of DMF (1 mL) formed a soluble CuCN·2LiCl complex within 5 min. After cooling the Cu-complex to −15°C, the organozinc reagent was added dropwise followed by the bromoacetylene 2 (116 mg, 0.352 mmol). The mixture was allowed to stir overnight at room temperature. Water was added and the suspension was extracted using heptane, washed with brine, dried (MgSO₄) and concentrated. Purification using flash column chromatography (10% EtOAc in heptane) yielded 5 (100 mg, 81%) as a colorless oil. 5: IR ν 3355, 2929, 2852, 2359, 2337, 1749, 1717, 1498, 1447, 1365, 1251, 1181, 1060; ¹H NMR (300 MHz, CDCl₃) δ 5.28 (d, J = 7.7 Hz, 1H), 4.43–4.38 (m, 1H), 3.73 (s, 3H), 2.69–2.63 (m, 2H), 2.13 (m, 1H), 1.73–1.22 (m, 10H), 1.43 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.4, 155.0, 88.1, 79.9, 73.8, 52.3, 32.7, 32.7, 28.8, 28.2, 25.8, 24.6, 23.1; HRMS (EI): calculated for C₁₇H₂₇NO₄ 309.1940, found 309.1937.  A solution of the tungsten catalyst (7 mg, 10 mol%) in C₆H₅Cl (2 mL) was treated with a solution of 14 (49.0 mg, 0.120 mmol) in C₆H₅Cl (5.0 mL) under an argon atmosphere and the resulting mixture was heated at 80°C for 3 h. Evaporation followed by flash column chromatography (80% EtOAc in heptane) afforded 15 (21.0 mg, 50%; 64% after correction for starting material) and 14 (16 mg, 33%) as colorless oils. 15: [α]_D =–14.6 (c = 1, CH₂Cl₂); IR ν 3313, 2931, 2865, 2249, 1744, 1667, 1520, 1366, 1170; ¹H NMR (400 MHz, CDCl₃) δ 7.14 (d, J = 8.7 Hz, 1H), 6.08 (d, J = 8.3 Hz, 1H), 4.78 (q, J = 6.8 Hz, 1H), 4.27 (q, J = 7.9 Hz, 1H), 3.73 (s, 3H), 2.17–2.15 (m, 4H), 2.07–1.96 (m, 2H), 1.79–1.52 (m, 4H), 1.45 (s, 9H), 0.89–0.83 (m, 2H); ¹³C NMR (100 MHz, CDCl₃) δ 173.2, 171.8, 155.8, 80.4, 80.2, 79.3, 53.8, 52.5, 51.2, 32.8 (2×), 28.1, 24.6, 24.2, 18.3 (2×); HRMS (EI): calculated for C₁₈H₂₈N₂O₅     

Rhodium-catalyzed synthesis of 2(5H)-furanones from terminal alkynes and non-substituted alkynes under water-gas shift reaction conditions

Rhodium-catalyzed synthesis of 2(5H)-furanones from alkynes under water-gas shift reaction conditions was studied. By improving the reaction conditions for internal alkynes reported previously, the reaction could be extended to terminal alkynes. Terminal alkynes are selectively converted into 3- and 4-substituted 2(5H)-furanones (2 and 3). When acetylene itself is used, 2(5H)-furanone (2n) is obtained in a good yield. Examination of reaction solutions by IR spectroscopy and some other experimental findings suggest that the active species would be an alkyne-coordinated monomeric rhodium anion. A new reaction path is proposed.     

Selective addressing of heteroditopic ligands by iron(II) and platinum(II)

The heteroditopic ligand 4′-(4,7,10-trioxadec-1-yn-10-yl)-2,2′:6′,2″-terpyridine, 2, contains an N,N′,N″-donor metal-binding domain that recognizes iron(II), and a terminal alkyne site that selectively couples to platinum(II). This selectivity has been used to investigate routes to the formation of heterometallic systems. The single crystal structures of ligand 2 and the complex [Fe(2)₂][PF₆]₂ are reported.     

Reaction of [Pt3(μ-CO)3(PBu3)3] with activated olefins and alkynes: the X-ray-structure of [Pt(CO)(PBu3)(CF3CCCF3)]

The reactions of the triangulo-cluster [Pt₃(μ-CO)₃(P^tBu₃)₃] with activated olefins and alkynes have been examined under various conditions. At low temperature, cluster fragmentation occurs yielding the Pt(0) complexes [Pt(CO)(P^tBu₃)(olefin)] (olefin = maleic anhydride and maleimide), while di(tert-butyl)acetylenedicarboxilate reacts quantitatively giving the dinuclear Pt(0) complex [Pt₂(CO)₂(P^tBu₃)₂(μ-η²:η²-^tBuO₂CCCCO₂^tBu)]. At higher temperature and in the presence of alkyne in large excess, the latter dimer converts quantitatively to the monomers [Pt(CO)(P^tBu₃)(alkyne)] (alkyne = CF₃CCCF₃ and ^tBuO₂CCCCO₂^tBu). The stereochemistry of these complexes has been established by NMR and IR measurements. The structure of [Pt(CO)(P^tBu₃)(CF₃CCCF₃)] was confirmed by X-ray diffraction analysis.     

Enhancing native chemical ligation for challenging chemical protein syntheses

Native chemical ligation has enabled the chemical synthesis of proteins for a wide variety of applications (e.g., mirror-image proteins). However, inefficiencies of this chemoselective ligation in the context of large or otherwise challenging protein targets can limit the practical scope of chemical protein synthesis. In this review, we focus on recent developments aimed at enhancing and expanding native chemical ligation for challenging protein syntheses. Chemical auxiliaries, use of selenium chemistry, and templating all enable ligations at otherwise suboptimal junctions. The continuing development of these tools is making the chemical synthesis of large proteins increasingly accessible.     

Exploiting azide–alkyne click chemistry in the synthesis,tracking and targeting of platinum anticancer complexes

Click chemistry is fundamentally important to medicinal chemistry and chemical biology. It represents a powerful and versatile tool, which can be exploited to develop novel Pt-based anticancer drugs and to better understand the biological effects of Pt-based anticancer drugs at a cellular level. Innovative azide–alkyne cycloaddition–based approaches are being used to functionalise Pt-based complexes with biomolecules to enhance tumour targeting. Valuable information in relation to the mechanisms of action and resistance of Pt-based drugs is also being revealed through click-based detection, isolation and tracking of Pt drug surrogates in biological and cellular environments. Although less well-explored, inorganic Pt-click reactions enable synthesis of novel (potentially multimetallic) Pt complexes and provide plausible routes to introduce functional groups and monitoring Pt-azido drug localisation.     

1,2,3-Triazole-nimesulide hybrid: Their design,synthesis and evaluation as potential anticancer agents

A new hybrid template has been designed by integrating the structural features of nimesulide and the 1,2,3-triazole moiety in a single molecular entity at the same time eliminating the problematic nitro group of nimesulide. The template has been used for the generation of a library of molecules as potential anticancer agents. A mild and greener CuAAC approach has been used to synthesize these compounds via the reaction of 4-azido derivative of nimesulide and terminal alkynes in water. Three of these compounds showed promising growth inhibition (IC₅₀ ～6–10 μM) of A549, HepG2, HeLa and DU145 cancer cell lines but no significant effects on HEK293 cell line. They also inhibited PDE4B in vitro (60–70% at 10 μM) that was supported by the docking studies (PLP score 87–94) in silico.     

Medicinal attributes of 1,2,3-triazoles: Current developments

1,2,3-Triazoles are important five-membered heterocyclic scaffold due to their extensive biological activities. This framework can be readily obtained in good to excellent yields on the multigram scale through click chemistry via reaction of aryl/alkyl halides, alkynes and NaN₃ under ambient conditions. It has been an emerging area of interest for many researchers throughout the globe owing to its immense pharmacological scope. The present work aims to summarize the current approaches adopted for the synthesis of the 1,2,3-triazole and medicinal significance of these architectures as a lead structure for the discovery of drug molecules such as COX-1/COX-2 inhibitors (celecoxib, pyrazofurin), HIV protease inhibitors, CB1 cannabinoid receptor antagonist and much more which are in the pipeline of clinical trials. The emphasis has been given on the major advancements in the medicinal prospectus of this pharmacophore for the period during 2008–2016.     

Clickable gold nanoparticles for streamlining capture,enrichment and release of alkyne-labelled proteins

Alkyne-labelled proteins are generated as key intermediates in the chemical probe-based approaches to proteomics analysis. Their efficient and selective detection and isolation is an important problem. We designed and synthesized azide-functionalized gold nanoparticles as new clickable capture reagents to streamline click chemistry-mediated capture, enrichment and release of the alkyne-labelled proteins in one-pot to expedite the post-labelling analysis. Because hydrophobic surface functionalities are known to render gold nanoparticles poorly water-dispersible, hydrophilic PEG linkers with two different lengths were explored to confer colloidal stability to the clickable capture reagents. We demonstrated the ability of the capture reagents to conjugate the alkyne containing proteins at a nanomolar concentration via click chemistry, which can be immediately followed by their enrichment and elution. Furthermore, a bifunctional clickable capture reagent bearing sulforhodamine and azide groups was shown to conveniently attach a fluorophore to the alkyne-labelled protein upon click capture, which facilitated their rapid detection in the gel analysis.