Alginate embedding and subsequent sporulation of in vitro-produced Conidiobolus thromboides hyphae using a pressurised air-extrusion method

Conidiobolus thromboides is an entomophthoralean fungus with potential as a biological control agent of aphids. However, its application in biological control is limited due to its formulation requirements. The objective of this study was to develop and optimise a novel air-extrusion method to embed C. thromboides hyphae at high density in alginate pellets. An orthogonal experimental design was used to investigate selected combinations of parameters known to affect hyphal density within pellets. The diameter of pellets produced, and the calculated density of hyphae within them, ranged from 0.18 ± 0.09 to 3.17 ± 0.06 mm and from 0.02 to 350.56 mg/mm³ respectively. These data were used to predict the optimal parameter combination to deliver the greatest density of hyphae of C. thromboides per pellet: 1% sodium alginate, a 1:2 ratio of hyphae to sodium alginate, an orifice diameter of 0.232 mm and an air pressure of 0.05 MPa. Pellets made under the optimal conditions predicted produced a mean total of 4.3 ± 0.6 × 10⁵ conidia per pellet at 100% relative humidity which was significantly greater than the mean total number of conidia produced from infected aphid cadavers of comparable size (9.35 ± 0.85 × 10⁴) (p < 0.001). In conclusion, air-extrusion embedding appears to be a promising method for formulating in vitro-produced hyphae of C. thromboides for use in biological control.     

The Effect of Sterilization, pH, Filler and Spore Inoculum Concentration on the Preparation of Alginate Pellets

Alginate encapsulation of an atoxigenic strain of Aspergillus flavus was studied in order to optimize encapsulation of fungal inocula with alginic acid. Sterilization by autoclaving is known to depolymerize sodium alginate. Buffered solutions (pH = 7-8) reduced this effect. Autoclaving the alginate solution with a filler/nutrient further inhibited the depolymerization reaction. Autoclaving under optimal conditions allowed a less expensive alginate (medium viscosity) to be used at a lower concentration (1%) to produce a stable product. The lowest cost pellets resulted from use of 1% medium viscosity sodium alginate with 10% cotton-seed meal. Further savings may be achieved by performing fermentations directly in alginate-nutrient mixtures and thus eliminating the mixing and blending steps. In such formulations, the nutrient composition and length of fermentation must be adjusted to prevent alginate hydrolysis. The ultimate composition of alginate pellets is influenced by the diffusion of nutrients during gelation. Up to 65% of water-soluble nutrients were lost from alginate pellets during gelation. Once pellets are introduced into the environment, organisms other than the formulated agent compete for pelleted nutrients. A minimum concentration of the biocontrol agent must be present to ensure the agent excludes competitors and successfully converts the nutrients to biomass. For A. flavus, 5000 spores g^-1 were required.     

Mechanical stabilization of guard cell protoplasts of Vicia faba

Guard cell protoplasts of Vicia faba were immobilized in cross-linked Ca-alginate. No visible morphological changes were detected under the light microscope over a period of 14 days. The entrapped cells reacted normally to changes of the external osmolarity by shrinking and swelling. Addition of the calcium complexing agent, citrate, led to dissolution of the matrix. After reequilibration with Ca ions the released cells regained their ability to swell and shrink in response to external stress. The released protoplasts could be stained with the vital dye, neutral which was accumulated in the vacuoles. It should also be noted that the protoplasts can be transported when immobilized.     

Biocatalytic asymmetric hydroxylation of hydrocarbons by free and immobilized Bacillus megaterium cells

Screening of soil bacteria with allylbenzene resulted in a Bacillus megaterium strain, which hydroxylates simple hydrocarbons in high enantiomeric excess (ee up to 99%). Benzylic and nonbenzylic hydroxylation products were obtained, without the usually observed high preference for the benzylic position. The immobilization of the B. megaterium cells in alginate gel effectively improved the stability of the cells and increased the amounts of products formed, without loss of enantioselectivity. The product ratio ( vs. β hydroxylation) was shifted towards benzylic hydroxylation, which suggests that at least two hydroxylating enzymes with distinct regioselectivity are involved. Comparison to free-cell fermentations in small- and large-scale bioreactors (up to 2000 ml) showed that the use of immobilized cells is advantageous, as they are easier to handle and yield higher amounts of oxidation products.     

cDNA cloning of an alginate lyase from abalone, Haliotis discus hannai

An alginate lyase, termed HdAly in the present paper, was isolated from the hepatopancreas of abalone, Haliotis discus hannai, by ammonium sulfate fractionation, followed by TOYOPEARL CM-650M column chromatography. Enzymatic properties of HdAly were similar to those of previously reported Haliotis and Turbo poly(M) lyases, e.g., it preferentially degraded a poly(beta-D-mannuronate)-rich substrate with an optimal pH and temperature at pH 8.0 and 45 degrees C, respectively. In order to determine the primary structure of abalone lyase that is still poorly understood, cDNAs for HdAly were cloned by PCR from the abalone hepatopancreas cDNA library and sequenced. From the nucleotide sequences of the cDNAs, the sequence of 909 bp in total was determined, and the amino acid sequence of 273 residues was deduced from the translational region of 822 bp locating at nucleotide positions 27-848. The N-terminal region of 16 residues, except for the initiation Met in the deduced sequence, was regarded as the signal peptide since it was absent in the HdAly protein and showed high similarity to the consensus sequence for signal peptides of eukaryote secretary proteins. This suggests that HdAly is initially produced as a precursor possessing the signal peptide in hepatopancreatic cells and then secreted into digestive tract as the mature form. Thus, the mature HdAly was regarded to consist of 256 residues with the calculated molecular mass of 28895.5 Da. The amino acid sequence of HdAly showed 85 and 28% identity to those of Turbo cornutus alginate lyase SP2 and the C-terminal region of Chlorella virus lyase-like protein CL2, respectively, while it showed no significant identity to those of any bacterial alginate lyases. In order to provide the basis for the structure-function studies and various applications of the abalone lyase, a bacterial expression system was constructed by means of the HdAly-cDNA and pET-3a expression plasmid. Although the active recombinant HdAly was hardly produced at a cultivation temperature 37 degrees C in Escherichia coli BL21 (DE3), a small amount of soluble and active enzyme could be produced when the temperature was lowered to 19 degrees C.     

组织工程用纤维增强天然多糖水凝胶的进展

天然多糖水凝胶具有良好的生物相容性,然而其力学性能调节幅度小,无法满足组织工程应用巨大的需求。通过纤维增强法,不仅可显著提高天然多糖水凝胶的力学性能,还能调节复合水凝胶的降解性能、促进细胞粘附、增殖与分化行为及其组织沉积。常用的天然多糖组织工程水凝胶的纤维增强方法有物理共混法、化学作用法、静电驱动法与自组装法等。本文综述了纤维增强水凝胶的结构与功能特点,讨论了纤维增强对组织工程水凝胶的意义,以期对纤维增强组织工程水凝胶的发展起到促进作用。     

海藻酸转化生物乙醇研究进展

作为第三代生物燃料,大型褐藻类生物质转化燃料乙醇的研究受到广泛的关注。但是,现有的乙醇工业菌株并不能利用褐藻中的主要成分海藻酸,这个问题是海藻生物乙醇实现工业化生产的主要技术难关。近几年随着对海藻酸裂解酶和海藻酸降解菌代谢途径的深入研究,科研人员构建了不同的海藻酸发酵菌株,为高效转化大型海藻生产生物乙醇提供了可行的技术基础。这篇文章对海藻酸资源概况和海藻酸转化生物乙醇存在的科学问题及其研究进展进行了综述。     

Oxygen supply strongly influences metabolic fluxes,the production of poly(3-hydroxybutyrate) and alginate,and the degree of acetylation of alginate in Azotobacter vinelandii

The aim of this study was to evaluate carbon flux in Azotobacter vinelandii using metabolic flux analysis (MFA) under high and low aeration conditions to achieve an improved understanding of how these changes could be related to alginate acetylation and PHB production. Changes in oxygen availability had a considerable impact on the metabolic fluxes and were reflected in the growth rate, the specific glucose consumption rate, and the alginate and PHB yields. The main differences at the metabolic flux level were observed in three important pathways. The first important difference was consistent with respiratory protection; an increase in the flux generated through the tricarboxylic acid (TCA) cycle for cultures grown under high aeration conditions (up to 2.61 times higher) was observed. In the second important difference, the fluxes generated through pyruvate dehydrogenase, phosphoenol pyruvate carboxykinase and pyruvate kinase, all of which are involved in acetyl-CoA metabolism, increased by 10, 43.9 and 17.5%, respectively, in cultures grown under low aeration conditions compared with those grown under high aeration conditions. These changes were related to alginate acetylation, which was 2.6 times higher in the cultures with limited oxygen, and the changes were also related to a drastic increase in PHB production. Finally, the glyoxylate shunt was active under both of the conditions that were tested, and a 2.79-fold increase was observed in cultures that were grown under the low aeration condition.     

Influence of Aloe vera on water absorption and enzymatic in vitro degradation of alginate hydrogel films

This study investigates the influence of Aloe vera on water absorption and the in vitro degradation rate of Aloe vera-Ca-alginate hydrogel films, for wound healing and drug delivery applications. The influence of A. vera content (5%, 15% and 25%, v/v) on water absorption was evaluated by the incubation of the films into a 0.1 M HCl solution (pH 1.0), acetate buffer (pH 5.5) and simulated body fluid solution (pH 7.4) during 24 h. Results show that the water absorption is significantly higher for films containing high A. vera contents (15% and 25%), while no significant differences are observed between the alginate neat film and the film with 5% of A. vera. The in vitro enzymatic degradation tests indicate that an increase in the A. vera content significantly enhances the degradation rate of the films. Control films, incubated in a simulated body fluid solution without enzymes, are resistant to the hydrolytic degradation, exhibiting reduced weight loss and maintaining its structural integrity. Results also show that the water absorption and the in vitro degradation rate of the films can be tailored by changing the A. vera content.     

Antimicrobial and antioxidative potential of free and immobilised cellobiose dehydrogenase isolated from wood degrading fungi

Cellobiose dehydrogenase (CDH, EC 1.1.99.18) is a glycoprotein having many biotechnological applications. In the present study, CDHs isolated from Phlebia lindtneri (PlCDH), Phanerochaete chrysosporium (PchCDH), Cerrena unicolor (CuCDH), and Pycnoporus sanguineus (PsCDH) were studied the first time for their ability to generate antioxidant and antimicrobial agents. The aim of the research was to evaluate the antioxidant and antimicrobial activity of systems composed of four CDHs and lactose or cellobiose as a reaction substrate. The free radical scavenging effect of free and immobilised enzymes was evaluated using the DPPH method. The lowest values of EC₅₀ (10.04 ± 0.75 $\text{μg}$/ml) was noted for PlCDH/lactose and for PlCDH/cellobiose (12.06 ± 1.35 $\text{μg}$/ml). The EC₅₀value reached 12.6 ± 1.51 $\text{μg}$/ml in the case of PsCDH/lactose and 15.96 ± 1.35 for PsCDH. The CDH preparations were also effectively immobilised in alginate (the immobilisation efficiency expressed as a protein yield ranged from 61.6 to 100 %). The operational stability expressed as a scavenging effect showed the possibility of using the alginate beads 4 times. Both the free and immobilised CDHs as well as the CDH/substrate were tested against Gram-negative Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, and Gram-positive Staphylococcus aureus ATCC 25923 bacteria. All samples, except PlCDH, were potentially effective in suppression of bacterial growth. The highest percentage of inhibition (100 %) was obtained for S. aureus bacteria using PsCDH and PchCDH with lactose as a substrate, whereas a slightly lesser effect was observed for E. coli and P. aeruginosa bacterial cells, i.e. 64.1 % and 86.5 % (PsCDH) and 94.1 % and 41.4 % (PchCDH), respectively. Furthermore, the concentrations of the reaction products (aldonic acids and hydrogen peroxide) were quantified and the surface morphology of the alginate beads was analysed using SEM visualisation.