Role of lipopeptides produced by Bacillus subtilis GA1 in the reduction of grey mould disease caused by Botrytis cinerea on apple

AIM: Test of Bacillus subtilis strain GA1 for its potential to control grey mould disease of apple caused by Botrytis cinerea. METHODS AND RESULTS: GA1 was first tested for its ability to antagonize in vitro the growth of a wide variety of plant pathogenic fungi responsible for diseases of economical importance. The potential of strain GA1 to reduce post-harvest infection caused by B. cinerea was tested on apples by treating artificially wounded fruits with endospore suspensions. Strain GA1 was very effective at reducing disease incidence during the first 5 days following pathogen inoculation and a 80% protection level was maintained over the next 10 days. Treatment of fruits with an extract of GA1 culture supernatant also exerted a strong preventive effect on the development of grey mould. Further analysis of this extract revealed that strain GA1 produces a wide variety of antifungal lipopeptide isomers from the iturin, fengycin and surfactin families. A strong evidence for the involvement of such compounds in disease reduction arose from the recovery of fengycins from protected fruit sites colonized by bacterial cells. CONCLUSIONS: The results presented here demonstrate that, despite unfavourable pH, B. subtilis endospores inoculated on apple pulp can readily germinate allowing significant cell populations to establish and efficient in vivo synthesis of lipopeptides which could be related to grey mould reduction. SIGNIFICANCE AND IMPACT OF THE STUDY: This work enables for the first time to correlate the strong protective effect of a particular B. subtilis strain against grey mould with in situ production of fengycins in infected sites of apple fruits.     

Real-time monitoring of cell viability and cell density on the basis of a three dimensional optical reflectance method (3D-ORM): investigation of the effect of sub-lethal and lethal injuries

Cell density and cell viability have been followed on-line by using a three-dimensional optical reflectance method (3D-ORM) probe. This method has allowed to highlight the differences between a well-mixed and a scale-down bioreactor configured in order to reproduce mixing deficiencies during a fed-batch culture of Escherichia coli. These differences have been observed both for the obscuration factor (OBF) and the coincidence probability delivered by the probe. These parameters are correlated to flow cytometry measurement based on the PI-uptake test and cell density based on optical density measurement. This first set of results has pointed out the fact that the 3D-ORM probe is sensitive to sub-lethal injuries encountered by microbial cells in process-related conditions. The effect of lethal injuries has been further investigated on the basis of additional experiments involving heat stress and a sharp increase of the OBF has been observed indicating that cells are effectively injured by the increase of temperature. However, further improvement of the probe are needed in order to give access to single-cell measurements.     

Characterization of serracin P,a phage-tail-like bacteriocin,and its activity against Erwinia amylovora,the fire blight pathogen

Serratia plymithicum J7 culture supernatant displayed activity against many pathogenic strains of Erwinia amylovora, the causal agent of the most serious bacterial disease of apple and pear trees, fire blight, and against Klebsiella pneumoniae, Serratia liquefaciens, Serratia marcescens, and Pseudomonas fluorescens. This activity increased significantly upon induction with mitomycin C. A phage-tail-like bacteriocin, named serracin P, was purified from an induced culture supernatant of S. plymithicum J7. It was found to be the only compound involved in the antibacterial activity against sensitive strains. The N-terminal amino acid sequence analysis of the two major subunits (23 and 43 kDa) of serracin P revealed high homology with the Fels-2 prophage of Salmonella enterica, the coliphages P2 and 168, the phiCTX prophage of Pseudomonas aeruginosa, and a prophage of Yersinia pestis. This strongly suggests a common ancestry for serracin P and these bacteriophages.     

Influence of electrical properties on the evaluation of the surface hydrophobicity of Bacillus subtilis

The surface hydrophobicity of nine Bacillus subtilis strains in different states (spores, vegetative cells, and dead cells) was assessed by water contact angle measurements, hydrophobic interaction chromatography (HIC) and bacterial adhesion to hydrocarbon (BATH). Electrokinetic properties of B. subtilis strains were characterized by zeta potential measurements and found to differ appreciably according to the strain. Correlations between HIC data, BATH data and zeta potential showed that HIC and BATH are influenced by electrostatic interactions. Water contact angle measurements thus provide a better estimate of cell surface hydrophobicity. The water contact angle of B. subtilis varied according to the strain and the state, the spores tending to be more hydrophobic than vegetative cells.     

Kinetic study of Lactococcus lactis strains (SLT6 and SLT10) growth on papain-hydrolysed whey

The effect of controlled whey hydrolysis by papain on growth of two lactic acid bacteria isolated from artisanal Leben: Lactococcus lactis var. diacetylactis (SLT6 and SLT10) was investigated. The higher biomass and maximum specific growth rate (μ _max) were obtained after 30 min of hydrolysis. HPLC analysis of peptides showed that whey hydrolysis reduced the amount of peptides of MW > 400 Da and increased those peptides of MW < 400 Da. The two studied strains exhibited different peptide requirements. The pH-controlled batch cultures in 30 min hydrolysed whey followed the Monod kinetic for growth and for lactate production. The values of the key kinetic constants were: maximum specific growth rate (μ _max), 1.08 and 0.56 h^?1; yield biomass on lactose (Y _x/s), 0.20 and 0.18 g g^?1 and saturation constant K _s, 4.2 and 2.8 g L^?1 for SLT6 and SLT10, respectively. When compared with batch experimental data, the model provided good predictions for growth, lactose utilisation and lactate production profiles.     

Comparative study of biological hydrogen production by pure strains and consortia of facultative and strict anaerobic bacteria

In this paper, a simple and rapid method was developed in order to assess in comparative tests the production of binary biogas mixtures containing CO₂ and another gaseous compound such as hydrogen or methane. This method was validated and experimented for the characterisation of the biochemical hydrogen potential of different pure strains and mixed cultures of hydrogen-producing bacteria (HPB) growing on glucose.The experimental results compared the hydrogen production yield of 19 different pure strains and sludges: facultative and strict anaerobic HPB strains along with anaerobic digester sludges thermally pre-treated or not. Significant yields variations were recorded even between different strains of the same species by i.e. about 20% for three Clostridium butyricum strains. The pure Clostridium butyricum and pasteurianum strains achieved the highest yields i.e. up to 1.36 mol H₂/mol glucose compared to the yields achieved by the sludges and the tested Escherichia and Citrobacter strains.     

Placenta-like structure of the aphid endoparasitic wasp Aphidius ervi: a strategy of optimal resources acquisition

Aphidius ervi (Hymenoptera: Braconidae) is an entomophagous parasitoid known to be an effective parasitoid of several aphid species of economic importance. A reduction of its production cost during mass rearing for inundative release is needed to improve its use in biological control of pests. In these contexts, a careful analysis of its entire development phases within its host is needed. This paper shows that this parasitoid has some characteristics in its embryological development rather complex and different from most other reported insects, which can be phylogenetically very close. First, its yolkless egg allows a high fecundity of the female but force them to hatch from the egg shell rapidly to the host hemocoel. An early cellularisation allowing a rapid differentiation of a serosa membrane seems to confirm this hypothesis. The serosa wraps the developing embryo until the first instar larva stage and invades the host tissues by microvilli projections and form a placenta like structure able to divert host resources and allowing nutrition and respiration of embryo. Such interspecific invasion, at the cellular level, recalls mammal's trophoblasts that anchors maternal uterine wall and underlines the high adaptation of A. ervi to develop in the host body.     

Involvement of fengycin-type lipopeptides in the multifaceted biocontrol potential of Bacillus subtilis

In this work, the potential of Bacillus subtilis strain M4 at protecting plants against fungal diseases was demonstrated in different pathosystems. We provide evidence for the role of secreted lipopeptides, and more particularly of fengycins, in the protective effect afforded by the strain against damping-off of bean seedlings caused by Pythium ultimum and against gray mold of apple in post-harvest disease. This role was demonstrated by the strong biocontrol activity of lipopeptide-enriched extracts and through the detection of inhibitory quantities of fengycins in infected tissues. Beside such a direct antagonism of the pathogen, we show that root pre-inoculation with M4 enabled the host plant to react more efficiently to subsequent pathogen infection on leaves. Fengycins could also be involved in this systemic resistance-eliciting effect of strain M4, as these molecules may induce the synthesis of plant phenolics involved in or derived from the defense-related phenylpropanoid metabolism. Much remains to be discovered about the mechanisms by which Bacillus spp suppress disease. Through this study on strain M4, we reinforce the interest in B. subtilis as a pathogen antagonist and plant defense-inducing agent. The secretion of cyclic fengycin-type lipopeptides may be tightly related to the expression of these two biocontrol traits.     

Stochastic models to study the impact of mixing on a fed-batch culture of Saccharomyces cerevisiae

The mechanisms of interaction between microorganisms and their environment in a stirred bioreactor can be modeled by a stochastic approach. The procedure comprises two submodels: a classical stochastic model for the microbial cell circulation and a Markov chain model for the concentration gradient calculus. The advantage lies in the fact that the core of each submodel, i.e., the transition matrix (which contains the probabilities to shift from a perfectly mixed compartment to another in the bioreactor representation), is identical for the two cases. That means that both the particle circulation and fluid mixing process can be analyzed by use of the same modeling basis. This assumption has been validated by performing inert tracer (NaCl) and stained yeast cells dispersion experiments that have shown good agreement with simulation results. The stochastic model has been used to define a characteristic concentration profile experienced by the microorganisms during a fermentation test performed in a scale-down reactor. The concentration profiles obtained in this way can explain the scale-down effect in the case of a Saccharomyces cerevisiae fed-batch process. The simulation results are analyzed in order to give some explanations about the effect of the substrate fluctuation dynamics on S. cerevisiae.