Reazioni delle piante di Ricinus communis a incisioni sperimentali

Summary

The author has produced wounds in the stem of Ricinus communis, studing the regeneration and cicatrization processes.

The rapidity of the surface cicatrization is in relation with the water loss of the waunded cells.

Both in the stems woumded let free and in those in which an extra tissue has been introduced, the cicatrization processes tacke place. They only take place with different velocity. The healing process lead to the reconstruction of the cortical and the conducting tissues.

The whole reconstruction of the stele may occur, when the flow of the assimilated stuffs is slowed. Sothat it is probable that the regeneration depends more upon the tissue nutrition tham on a specifical properti of the tissues.     

Characterization of the fluorophore 4-heptadecyl-7-hydroxycoumarin: a probe for the head-group region of lipid bilayers and biological membranes

The fluorophore 4-heptadecyl-7-hydroxycoumarin was used as a probe to study the properties of phospholipid bilayers at the lipid-water interface. To this end, the steady-state fluorescence anisotropy, the differential polarized phase fluorometry, and the emission lifetime of the fluorophore were measured in isotropic viscous medium, in lipid vesicles, and in the membrane of vesicular stomatitis virus. In the isotropic medium (glycerol), the probe showed an increase in the steady-state fluorescence anisotropy with a decrease in temperature, but the emission lifetime was unaffected by the change in temperature. In glycerol, the observed and predicted values for maximum differential tangents of the probe were identical, indicating that in isotropic medium 4-heptadecyl-7-hydroxycoumarin is a free rotator. Nuclear magnetic resonance and differential scanning calorimetric studies with lipid vesicles containing 1-2 mol % of the fluorophore indicated that the packaging density of the choline head groups was affected in the presence of the probe with almost no effect on the fatty acyl chains. The fluorophore partitioned equally well in the gel and liquid-crystalline phase of the lipids in the membrane, and the phase transition of the bilayer lipids was reflected in the steady-state fluorescence anisotropy of the probe. The presence of cholesterol in the lipid vesicles had a relatively small effect on the dynamics of lipids in the liquid-crystalline state, but a significant disordering effect was noted in the gel state. One of the most favorable properties of the probe is that its emission lifetime was unaffected by the physical state of the lipids or by the temperature.(ABSTRACT TRUNCATED AT 250 WORDS)     

The in vitro synthesis and characteristics of ribosomal RNA in imaginal discs of Drosophila melanogaster

Summary Late third instar imaginal discs of Drosophila melanogaster cultured in vitro in Robb's tissue culture medium synthesize 38S, 28S and 18S ribosomal RNAs which are qualitatively indistinguishable from their in vivo synthesized counterparts (Fig. 1). As found in other insect systems, the 38S molecule appears to be the precursor for both the 28S and 18S rRNAs (Figs. 2, 3 and 4). The 28S rRNA and a portion of the 38S pre-rRNA shift in sedimentation value upon exposure to heat or dimethylsulfoxide (Figs. 5 and 8). Studies of the thermal denaturations of these molecules (Figs. 6, 7 and 9) indicate the existence of a single class of 28S rRNA, but three classes of 38S pre-rRNAs. The addition of -ecdysone to the in vitro culture medium stimulates the net amount of rRNA synthesized, increases the rate of processing of the 38S precursor and increases the relative amount of 18S material produced (Figs. 10 and 12).This work was supported in part by grants from the National Science Foundation (GB-8176) and from the Atomic Energy Commission (AT-04-3-34).Predoctoral Trainees, PHS Training Grant No. 2-Tl-GM367 from Research Training Grants Branch, National Institute of General Medical Sciences.1 For purposes of simplification we shall refer to the rRNA molecules of D. melanogaster as being 38S, 30S, 28S and 18S; however, it should be noted that these values are approximate (see Hastings and Kirby, 1966; Greenberg, 1969; Tartof and Perry, 1970).     

Density-dependent decline of breeding success in an introduced, increasing mute swan Cygus olor population

An increasing population of the mute swan Cygnus olor , was studied from its very establishment in 1976 until 1998. As the number of pairs increased, there was a decline in all production parameters, including the average number of clutches per pair, the average number of broods per clutch, and the average number of fledged young per brood. In a multiple regression analysis covering the whole breeding season, the number of pairs and the average number of clutches per pair explained 71% of the variation in the average number of fledglings per pair. During the brood season, the average number of fledglings per brood was an additionally important parameter in explaining fledgling production. Habitat quality seemed to affect breeding: in places occupied earlier more cygnets fledged from a clutch than in habitats inhabited later. The decreased production of young very likely reflects density-dependent effects on reproduction. This density dependence seems to operate on the breeding grounds, since winter harshness did not affect breeding success. Density-dependent processes started acting already when pairs were beginning to nest, and continued during the brood period. Density dependence has apparently not been detected at the pair stage in earlier studies of bird populations.     

Synthesis of optically active diols using an efficient polymer bound cinchona alkaloid derivative

A new insoluble polymer containing a Cinchona alkaloid derivative has been synthesized and used as chiral ligand in the heterogeneous enantioselective dihydroxylation of olefins. It is shown that the enantioselectivity of the optically active diols obtained from both aliphatic and aromatic substrates is always comparable to that observed in the homogeneous phase under the same reaction conditions. A method for evaluating the enantiomeric excesses of the optically active products is also described. © 1995 Wiley-Liss, Inc.     

Thermodynamical model for insertion and aggregate binding of caffeine to the homopolymer poly(riboadenylate) and model choice by data analysis

This paper describes the model used to estimate the parameters of caffeine-poly(riboadenylate) (poly(A)) interactions from corresponding 1H-NMR measurements. The model of insertion and aggregate binding describes the non-cooperative insertion of a molecule C into an interspace between two monomers of a homopolymer in competition with aggregate binding. It contains two binding constants, K1 for insertion and K2 for the interaction of monomeric A units of the polymer with C molecules in bound aggregates, and two cooperativity parameters, Kcc for stacking of C molecules within aggregates and tau which is thought to be due to conformational adaptation of the polymer to those bound aggregates which cover more than one A unit. In contrast to other models, the size of a binding site (within the aggregates) is less than one monomeric unit, with n denoting the maximum number of C molecules per A unit in bound aggregates. The model is developed for general n by means of the method of sequence-generating functions. For n = 2 and n = 3, the correctness of the model treatment was checked by the matrix method. The model is applicable to the binding of aggregates to homopolymers, which are flexible enough to fit their structure to the aggregates.     

In vitro development of theDrosophila chorion in a chemically defined organ culture medium

Summary TheDrosophila chorion is produced normally in isolated follicles in Robb's chemically defined culture medium. The complex architecture of the shell developed in vitro from follicles as young as early stage 10 is completely normal morphologically. In addition, the time required for in vitro development closely approximates that observed for in vivo development. Comparisons of insect culture media developed by Robb, Grace, Schneider, and Echalier show large variations in their ability to supportDrosophila chorion development.     

Improving the phenotype predictions of a yeast genome‐scale metabolic model by incorporating enzymatic constraints

Genome‐scale metabolic models (GEMs) are widely used to calculate metabolic phenotypes. They rely on defining a set of constraints, the most common of which is that the production of metabolites and/or growth are limited by the carbon source uptake rate. However, enzyme abundances and kinetics, which act as limitations on metabolic fluxes, are not taken into account. Here, we present GECKO, a method that enhances a GEM to account for enzymes as part of reactions, thereby ensuring that each metabolic flux does not exceed its maximum capacity, equal to the product of the enzyme's abundance and turnover number. We applied GECKO to a Saccharomyces cerevisiae GEM and demonstrated that the new model could correctly describe phenotypes that the previous model could not, particularly under high enzymatic pressure conditions, such as yeast growing on different carbon sources in excess, coping with stress, or overexpressing a specific pathway. GECKO also allows to directly integrate quantitative proteomics data; by doing so, we significantly reduced flux variability of the model, in over 60% of metabolic reactions. Additionally, the model gives insight into the distribution of enzyme usage between and within metabolic pathways. The developed method and model are expected to increase the use of model‐based design in metabolic engineering.     

A computational algorithm to simulate disorganization of collagen network in injured articular cartilage

Cartilage defects are a known risk factor for osteoarthritis. Estimation of structural changes in these defects could help us to identify high risk defects and thus to identify patients that are susceptible for the onset and progression of osteoarthritis. Here, we present an algorithm combined with computational modeling to simulate the disorganization of collagen fibril network in injured cartilage. Several potential triggers for collagen disorganization were tested in the algorithm following the assumption that disorganization is dependent on the mechanical stimulus of the tissue. We found that tensile tissue stimulus alone was unable to preserve collagen architecture in intact cartilage as collagen network reoriented throughout the cartilage thickness. However, when collagen reorientation was based on both tensile tissue stimulus and tensile collagen fibril strains or stresses, the collagen network architecture was preserved in intact cartilage. Using the same approach, substantial collagen reorientation was predicted locally near the cartilage defect and particularly at the cartilage–bone interface. The developed algorithm was able to predict similar structural findings reported in the literature that are associated with experimentally observed remodeling in articular cartilage. The proposed algorithm, if further validated, could help to predict structural changes in articular cartilage following post-traumatic injury potentially advancing to impaired cartilage function.