The Na+-motive terminal oxidase activity in an alkalo- and halo-tolerant Bacillus

An alkalo- and halo-tolerant aerobic microorganism has been isolated which, according to microbiological analysis data and the ribosomal 5S RNA sequence, is a Bacillus similar, but not identical, to B. licheniformis and B. subtilis. The microorganism, called Bacillus FTU, proved to be resistant to the protonophorous uncoupler carbonylcyanide m-chlorophenylhydrazone (CCCP). The fast growth of Bacillus FTU in the presence of CCCP was shown to require a high Na+ concentration in the medium. A procedure was developed to exhaust endogenous respiratory substrates in Bacillus FTU cells so that fast oxygen consumption by the cells was observed only when an exogenous respiratory substrate was added. The exhausted cells were found to oxidize ascorbate in the presence of N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD) in a cyanide-sensitive fashion. The ascorbate oxidation was coupled to the uphill Na+ extrusion which was stimulated by CCCP and a penetrating weak base, diethylamine, as well as by valinomycin with or without diethylamine. Operation of the Bacillus FTU terminal oxidase resulted in the generation of a delta psi which, in the Na+ medium, was slightly decreased by CCCP and strongly decreased by CCCP + diethylamine. In the K+ medium, CCCP discharged delta psi even without diethylamine. Ascorbate oxidation was competent in ATP synthesis which was resistant to CCCP in the Na+ medium and sensitive to CCCP in the K+ medium as if Na+- and H+-coupled oxidative phosphorylations were operative in the Na+ and K+ media, respectively. Inside-out subcellular vesicles of Bacillus FTU were found to be competent in the Na+ uptake supported by oxidation of ascorbate + TMPD or diaminodurene. CCCP or valinomycin + K+ increased the Na+ uptake very strongly. The process was completely inhibited by cyanide or monensin, the former, but not the latter, being inhibitory for respiration. The data obtained indicate that in Bacillus FTU there is not only H+-motive but also Na+-motive terminal oxidase activity.     

Taxonomic studies on methylotrophic bacteria by 5S ribosomal RNA sequencing

Nucleotide sequences of 5S ribosomal RNA (rRNA) isolated from 19 strains of Gram-negative methylotrophic bacteria were determined. Comparison of these sequences allowed construction of a tentative phylogenetic tree and showed that the bacteria analysed belong to the Proteobacteria and fell into several clusters, including obligate methanotrophs, obligate methylotrophs and several groups of facultative methylotrophs. Taxonomic relations between methylotrophic and non-methylotrophic bacteria are discussed, and the polyphyletic nature of methylotrophy as a taxonomic feature is highlighted.     

Large scale production of recombinant mouse and rat growth hormone by fed-batch GS-NSO cell cultures

Investigations of biological effects of prolonged elevation of growth hormone in animals such as mice and rats require large amounts of mouse and rat growth hormone (GH) materials. As an alternative to scarce and expensive pituitary derived materials, both mouse and rat GH were expressed in NSO murine myeloma cells transfected with a vector containing the glutamine synthetase (GS) gene and two copies of mouse or rat GH cDNA. For optimal expression, the mouse GH vector also contained sequences for targeting integration by homologous recombination. Fed-batch culture processes for such clones were developed using a serum-free, glutamine-free medium and scaled up to 250 L production scale reactors. Concentrated solutions of proteins, amino acids and glucose were fed periodically to extend cell growth and culture lifetime, which led to an increase in the maximum viable cell concentration to 3.5×10⁹ cells/L and an up to 10 fold increase in final mouse and rat rGH titers in comparison with batch cultures. For successful scale up, similar culture environmental conditions were maintained at different scales, and specific issues in large scale reactors such as balancing oxygen supply and carbon dioxide removal, were addressed. Very similar cell growth and protein productivity were obtained in the fed-batch cultures at different scales and in different production runs. The final mouse and rat rGH titers were approximately 580 and 240 mg/L, respectively. During fed-batch cultures, the cell growth stage transition was accompanied by a change in cellular metabolism. The specific glucose consumption rate decreased significantly after the transition from the growth to stationary stage, while lactate was produced in the exponential growth stage and became consumed in the stationary stage. This was roughly coincident with the beginning of ammonia and glutamate accumulation at the entry of cells into the stationary stage as the result of a reduced glutamine consumption and periodic nutrient additions.     

Intraorganic lymphatic bed of the cattle heart

Lymphomicrocirculatory networks of endocardium, myocardium and epicardium, as well as lymphatic vessels of four orders represent the intraorganic lymphatic bed of the cattle heart. In the endocardium there is a lymphatic network with close loops and a small amount of blindly beginning capillaries. The capillary lymphatic bed of the endocardial trabeculae carneae is much more dense than that in the other part of the endocardial surface. The spatial lymphatic network of the myocardium is joined with the lymphomicrocirculatory networks of the endocardium and epicardium by means of a large amount of connections. The epicardial lymphatic bed is formed by blindly beginning lymphatic capillaries, which situate in close and nonclose loops of the lymphatic network. In the epicardium there is only one lymphatic network. The size of the loops and the diameter of the lymphatic capillaries is directly proportional to the age of the animals.     

Effect of pH and butyrate concentration on the production of acetone and butanol by Clostridium acetobutylicum grown in continuous culture

Summary When Clostridium acetobutylicum was grown in continuous culture under glucose limitation at neutral pH and varying dilution rates the only fermentation products formed were acetate, butyrate, carbon dioxide and molecular hydrogen. The Y _glucose ^max and (Y _ATP ^max ) _gluc ^exp values were 48.3 and 23.8 dry weight/mol, respectively. Acetone and butanol were produced when the pH was decreased below 5.0 (optimum at pH 4.3). The addition of butyric acid (20 to 80 mM) to the medium with a pH of 4.3 resulted in a shift of the fermentation from acid, to solvent formation.A preliminary report of part of this work was presented at a symposium Trends in the Biology of Fermentations for Fuels and Chemicals held December 7–11, 1980, at Brookhaven National Laboratory, Upton, New York; Gottschalk and Bahl 1981     

Plant biomechanics and resilience to environmental changes are controlled by specific lignin chemistries in each vascular cell type and morphotype

The biopolymer lignin is deposited in the cell walls of vascular cells and is essential for long-distance water conduction and structural support in plants. Different vascular cell types contain distinct and conserved lignin chemistries, each with specific aromatic and aliphatic substitutions. Yet, the biological role of this conserved and specific lignin chemistry in each cell type remains unclear. Here, we investigated the roles of this lignin biochemical specificity for cellular functions by producing single cell analyses for three cell morphotypes of tracheary elements, which all allow sap conduction but differ in their morphology. We determined that specific lignin chemistries accumulate in each cell type. Moreover, lignin accumulated dynamically, increasing in quantity and changing in composition, to alter the cell wall biomechanics during cell maturation. For similar aromatic substitutions, residues with alcohol aliphatic functions increased stiffness whereas aldehydes increased flexibility of the cell wall. Modifying this lignin biochemical specificity and the sequence of its formation impaired the cell wall biomechanics of each morphotype and consequently hindered sap conduction and drought recovery. Together, our results demonstrate that each sap-conducting vascular cell type distinctly controls their lignin biochemistry to adjust their biomechanics and hydraulic properties to face developmental and environmental constraints.

During the development of each vascular cell, specific lignin chemistries control their biomechanics and water conduction properties to face environmental changes.

IN A NUTSHELL Background: Lignin comprises multiple cell wall–localized aromatic polymers that are essential for vascular plants to conduct water and strengthen their organs. It has long been thought that lignin was randomly and nonspecifically assembled to provide mechanical strengthening and waterproofing to cells by filling-up the empty spaces in the cell walls. However, the different cell types and morphotypes forming the different sap-conducting pipes and their cell wall layers (inner vs. outer layer) exhibit specific lignin chemistries that are conserved among plant species. We, therefore, investigated the function of these specific lignin chemistries at the cell and cell wall layer levels for the different sap-conducting pipes in plants. Question: What is the function of a specific lignin chemistry for the different plant sap-conducting pipe cells? Can changes in the lignin chemistry of sap-conducting cells affect their hydraulic capacity when facing environmental conditions such as drought? Findings: We answered these questions by changing lignin levels and composition, using drugs to block lignin formation, and/or genetic engineering to switch off genes, in three complementary systems: (1) isolated cells grown in test tubes that we can trigger to become sap conduits, (2) annual plants, and (3) hardwood trees. We show that lignin chemistry is specific to each cell morphotype and changes during cell maturation, modifying the amount of lignin, the chemical composition of lignin units, and the position of these units in the longer polymer. These specific lignin chemistries are required for the proper function of each cell morphotype to properly conduct the sap and strengthen plant organs. Modifying the amount, the composition, and the time when specific units with distinct chemistry are incorporated in lignin of each cell morphotype has dramatic effects, causing defects in sap conduit hydraulic and biomechanical properties. The ratio between the different chemical units of lignin needs to be fine-tuned to adjust plant sap conduction and mechanical strengthening. Thus, changes in the proportion of lignin units with distinct chemistries confer different hydraulic and mechanical properties enabling plants to better resist and/or recover from drought. We also revealed that increases in the proportion of lignin units with aldehyde modulate plant pipe hydraulic and mechanical properties. Next steps: We are now working to identify and understand the molecular mechanisms that control the formation of specific lignin chemistries in distinct sites and times during the development of the different cell wall layers in each cell type and morphotype.     

Buckwheat trypsin inhibitor with helical hairpin structure belongs to a new family of plant defence peptides

A new peptide trypsin inhibitor named BWI-2c was obtained from buckwheat (Fagopyrum esculentum) seeds by sequential affinity, ion exchange and reversed-phase chromatography. The peptide was sequenced and found to contain 41 amino acid residues, with four cysteine residues involved in two intramolecular disulfide bonds. Recombinant BWI-2c identical to the natural peptide was produced in Escherichia coli in a form of a cleavable fusion with thioredoxin. The 3D (three-dimensional) structure of the peptide in solution was determined by NMR spectroscopy, revealing two antiparallel α-helices stapled by disulfide bonds. Together with VhTI, a trypsin inhibitor from veronica (Veronica hederifolia), BWI-2c represents a new family of protease inhibitors with an unusual α-helical hairpin fold. The linker sequence between the helices represents the so-called trypsin inhibitory loop responsible for direct binding to the active site of the enzyme that cleaves BWI-2c at the functionally important residue Arg(19). The inhibition constant was determined for BWI-2c against trypsin (1.7×10(-1)0 M), and the peptide was tested on other enzymes, including those from various insect digestive systems, revealing high selectivity to trypsin-like proteases. Structural similarity shared by BWI-2c, VhTI and several other plant defence peptides leads to the acknowledgement of a new widespread family of plant peptides termed α-hairpinins.