Cancer Cell Analyses at the Single Cell-Level Using Electroactive Microwell Array Device

Circulating tumor cells (CTCs), shed from primary tumors and disseminated into peripheral blood, are playing a major role in metastasis. Even after isolation of CTCs from blood, the target cells are mixed with a population of other cell types. Here, we propose a new method for analyses of cell mixture at the single-cell level using a microfluidic device that contains arrayed electroactive microwells. Dielectrophoretic (DEP) force, induced by the electrodes patterned on the bottom surface of the microwells, allows efficient trapping and stable positioning of single cells for high-throughput biochemical analyses. We demonstrated that various on-chip analyses including immunostaining, viability/apoptosis assay and fluorescent in situ hybridization (FISH) at the single-cell level could be conducted just by applying specific reagents for each assay. Our simple method should greatly help discrimination and analysis of rare cancer cells among a population of blood cells.     

Pilot-scale production of l-phenylalanine from d-glucose

Effects of inoculum size and total sugar content on both l-phenylalanine productivity and titre have been investigated using a tyrosine auxotrophic regulatory mutant of Escherichia coli. Fermentations were carried out in a 500 litre pilot fermenter with intermittent feeding of d-glucose plus phosphate. It was found that the productivity was not greatly affected by inoculum size. However, the l-phenylalanine titre was significantly affected by total sugar content. Relatively high productivities of up to 0.35–0.40 g l-phenylalanine l^?1 h^?1 have been achieved at l-phenylalanine titres of 14–15 g l^?1.     

Metabolism of Choline Chloride and Its Analogs in Wheat Seedlings

The incorporation rate of choline chloride and allylcholinebromide into wheat protoplasts were rapid compared with theincorporation rate of benzylcholine bromide. Choline chloridewas metabolized via two pathways: choline betaine and choline phosphorylcholine phos-phatidylcholine. Allylcholine bromidewas metabolized via only one pathway: allylcholine phosphorylallylcholine phosphatidylallylcholine, and benzylcholine bromide was notmetabolized at all. These results suggest that the stimulationof photosynthesis (Hyeon et al. 1988) by these compounds iscaused directly by these choline analogs and not by their metabolites. (Received June 29, 1989; Accepted October 20, 1989)     

Kinetics of producing pro-urokinase in perfusion cultivations

Summary Better production of pro-urokinase from human cell line was observed with 5% serum containing medium than 10% or serum free medium on Cytodex II under perfusion chemostat operations, showing 0.8×10^–5 (IU/daycell) of maximum productivity at 0.020 (l/h) of dilution rate in 5% serum medium, which corresponds to 800 IU/mL at this dilution rate. Conversion of pro-urokinase was reduced in the serum-containing media.     

Cell-Cell Recognition during Fertilization in a Red Alga, Antithamnion sparsum (Ceramiaceae, Rhodophyta)

A gamete recognition mechanism in Antithamnion sparsum Tokidais proposed based on experiments using various lectins and carbohydrates.Spermatial binding to trichogynes is inhibited by pre-incubationof spermatia with concanavalin A (ConA) and/or L-fucose, whiletrichogyne receptors are blocked by the complementary carbohydrate-methyl D-mannose and/or the lectin Ulex europaeus agglutinin(UeA1). Binding inhibition (40–50%) was observed with10–50 mM carbohydrates and 25–50 µg ml^-1 lectins.The inhibitory effects of ConA and UeA1 is partially reversed(to 80–90% of controls) by addition of -methyl D-mannoseand L-fucose, respectively. Lectin binding to spermatial surfaceswas visualized by Fluorescein isothiocyanate (FITC) conjugatedConA, whereas carbohydrate receptors along the trichogyne andspermatium were localized with -mannosylated-FITC-albumin andL-fucosylated-FITC-albumin, respectively. These results suggestthat gamete recognition in Antithamnion sparsum is mediatedby a double-docking recognition system consisting of spermatiapossessing surface L-fucose receptors and -methyl D-mannosemoiety, and trichogynes possessing the complementary receptors. (Received December 5, 1995; Accepted April 22, 1996)     

A SIGNAL GLYCOPROTEIN WITH α-d-MANNOSYL RESIDUES IS INVOLVED IN THE WOUND-HEALING RESPONSE OF ANTITHAMNION SPARSUM (CERAMIALES,RHODOPHYTA)1

A variety of fluorescein isothiocyanate-labeled lectins specific for different sugar moieties were examined as probes for the wound-healing response in the filamentous red alga Antithamnion sparsum Tokida. Among them, only concanavalin A (ConA) and Lens culrinaris agglutinin (LCA), which have specificity to α-D-mannosyl residues, bound specifically to repair cells during the wound-healing process. When ConA or LCA was added at various time intervals after wounding, it first bound (3 h post-wounding) as a thin layer at the tips of the adjacent cells. Later (4–5 h post-wounding) labeling also appeared at the tips of the repair cells. Intense labeling at these sites continued throughout the healing process until repair cell fusion, at which time the lectin labeling was reduced to a narrow ring around the area of fusion. When added to plants prior to wounding and continually monitored, these same lectins acted as inhibitors to the wound-healing response. Other control lectins showed no inhibitory effects. A crude extract solution obtained from decapitated filaments stimulated the wound-healing response, and a lectin-binding component bound strongly to a protein-binding transfer membrane. These results suggest that the labeled compound is a glycoprotein that has α-D-mannosyl residues and is similar to the repair hormone rhodomorphin found in Griffithsia pacifica Kylin.     

Use of moving aeration membrane bioreactor for the efficient production of tissue type plasminogen activator in serum free medium

A moving aeration-membrane (MAM) bioreactor was employed for the production of 2 μg/mL of tissue type Plasminogen Activator (tPA) in serum free medium from normal human fibroblast cells. This system could maintain high cell density for long periods of steady state conditions in perfusion cultivation. Under normal operating conditions, shear stress was as low as 0.65 dynes/cm² at the agitation speed of 80 rpm. Even though cell density gradually decreased with increasing agitation speed, tPA production increased linearly with increasing shear stress within a moderate range. This culture system allowed production of 2 μg tPA/mL while maintaining a high cell density of 1.0×10⁷ viable cells/mL.     

A Novel Electrochemically Active and Fe(III)-reducing Bacterium Phylogenetically Related to Clostridium butyricum Isolated from a Microbial Fuel Cell

An obligatory anaerobic bacterium was isolated from a mediator-less microbial fuel cell using starch processing wastewater as the fuel and designated as EG3. The isolate was Gram-positive, motile and rod (2.8–3.0 μm long, 0.5–0.6 μm wide). The partial 16S rRNA gene sequence and analysis of the cellular fatty acids profile suggested that EG3 clusters with Clostridium sub-phylum and exhibited the highest similarity (98%) with Clostridium butyricum. The temperature and pH optimum for growth were 37°C and 7.0, respectively. The major products of glucose and glucose/Fe(O)OH metabolism were lactate, formate, butyrate, acetate, CO₂and H₂. Growth was faster at the initial phase and the cell yield was higher when the medium was supplemented with Fe(O)OH than without Fe(O)OH. These results suggest that Fe(III) ion is utilised as an electron sink. Cyclic voltammetry showed that Clostridium butyricum EG3 cells were electrochemically active. It is a novel characteristic of strict anaerobic Gram-positive bacteria.     

Computational Study on Subdural Cortical Stimulation - The Influence of the Head Geometry,Anisotropic Conductivity,and Electrode Configuration

Subdural cortical stimulation (SuCS) is a method used to inject electrical current through electrodes beneath the dura mater, and is known to be useful in treating brain disorders. However, precisely how SuCS must be applied to yield the most effective results has rarely been investigated. For this purpose, we developed a three-dimensional computational model that represents an anatomically realistic brain model including an upper chest. With this computational model, we investigated the influence of stimulation amplitudes, electrode configurations (single or paddle-array), and white matter conductivities (isotropy or anisotropy). Further, the effects of stimulation were compared with two other computational models, including an anatomically realistic brain-only model and the simplified extruded slab model representing the precentral gyrus area. The results of voltage stimulation suggested that there was a synergistic effect with the paddle-array due to the use of multiple electrodes; however, a single electrode was more efficient with current stimulation. The conventional model (simplified extruded slab) far overestimated the effects of stimulation with both voltage and current by comparison to our proposed realistic upper body model. However, the realistic upper body and full brain-only models demonstrated similar stimulation effects. In our investigation of the influence of anisotropic conductivity, model with a fixed ratio (1∶10) anisotropic conductivity yielded deeper penetration depths and larger extents of stimulation than others. However, isotropic and anisotropic models with fixed ratios (1∶2, 1∶5) yielded similar stimulation effects. Lastly, whether the reference electrode was located on the right or left chest had no substantial effects on stimulation.     

1D Stretchable Block Copolymer Yarn‐Based Energy Harvesters via BaTiO3/Polydimethylsiloxane Composite‐Carbon Conductive Ink

Highly stretchable self‐powered energy sources are promising options for powering diverse wearable smart electronics. However, commercially existing energy sources are disadvantaged by tensile strain limitations and constrained deformability. Here, 1D thread‐based highly stretchable triboelectric nanogenerators (HS‐TENGs), a crucial step toward overcoming these obstacles, are developed based on a highly stretchable coaxial‐type poly[styrene‐b‐isoprene‐b‐styrene] (SIS) elastomer tube. Carbon conductive ink is injected into the SIS tube as a core 1D electrode that remains almost unaffected even under 250% stretching because of its low Young's modulus. To further facilitate power generation by the HS‐TENG, a composite of barium titanate nanoparticles (BaTiO₃ NPs) and polydimethylsiloxane (PDMS) is coated on the initial SIS tube to modulate the dielectric permittivity based on variations in the BaTiO₃ NPs volume ratio. The 1D PDMS/BaTiO₃ NP composite‐coated SIS and a nylon 6‐coated 2D Ni–Cu conductive fabric are selected as triboelectric bottom and top layers, respectively. Woven HS‐TENGs textiles yield consistent power output under various extreme and harsh conditions, including folded, twisted, and washed states. These experimental findings indicate that the approach may become useful for realizing stretchable multifunctional power sources for various wearable electronics.