New cationic exchanger support for reversible immobilization of proteins

New tailor-made cationic exchange resins have been prepared by covalently binding aspartic-dextran polymers (e.g. MW 15 000-20 000) to porous supports (aminated agarose and Sepabeads). More than 80% of the proteins contained in crude extracts from Escherichia coli and Acetobacter turbidans have been strongly adsorbed on these porous materials at pH 5. This interaction was stronger than in conventional carboxymethyl cellulose (e.g., at pH 7 and 25 degrees C, all proteins previously adsorbed at pH 5 were released from carboxymethyl cellulose, whereas no protein was released from the new supports under similar conditions). Ionic exchange properties of such composites were strongly dependent on the size of the aspartic-dextran polymers as well as on the exact conditions of the covalent coating of the solids with the polymer (optimal conditions: 100 mg aspartic-dextran 20 000/(mL of support); room temperature). Finally, some industrially relevant enzymes (Kluyveromices lactis, Aspergillus oryzae, and Thermus sp. beta-galactosidases, Candida antarctica B lipase, and bovine pancreas trypsin and chymotrypsin) have been immobilized on these supports with very high activity recovery and immobilization rates. After enzyme inactivation, the enzyme can be fully desorbed from the support and the support could be reused for several cycles.     

Co-aggregation of penicillin g acylase and polyionic polymers: an easy methodology to prepare enzyme biocatalysts stable in organic media

A novel type of biocatalyst that combines the good properties of cross-linked enzyme aggregates (CLEAs) and hydrophilic microenvironments has been developed. Dextran sulfate- and polyethyleneimine-coated CLEAs of penicillin acylase (CLEA-GDP) were prepared by adding the polymers of different sizes before the precipitation stage of the enzyme. This study presents the development and optimization of a protocol to produce such a biocatalyst using penicillin acylase as a model. Experiments show that CLEA-GDPs have a highly increased stability in organic media. The average half-life of the preparations was much higher than standard CLEA without a microenvironment (CLEA-G), (e.g., more than 25-fold) in the presence of dioxane. However, their thermal stability was not increased, which leads to the conclusion that the stability of CLEA-GDPs in organic media is due to the hydrophilic microenvironment that surrounds the protein enzyme more than to a conformational stiffening effect. This is further supported by solvation experiments that show a preferential hydration of CLEA when polymers are used to coat the enzyme. CLEA-GDPs are clearly better than other biocatalysts in terms of solvent stability.     

Stabilization of penicillin G acylase from Escherichia coli: site-directed mutagenesis of the protein surface to increase multipoint covalent attachment

Three mutations on the penicillin acylase surface (increasing the number of Lys in a defined area) were performed. They did not alter the enzyme's stability and kinetic properties; however, after immobilization on glyoxyl-agarose, the mutant enzyme showed improved stability under all tested conditions (e.g., pH 2.5 at 4 degrees C, pH 5 at 60 degrees C, pH 7 at 55 degrees C, or 60% dimethylformamide), with stabilization factors ranging from 4 to 11 compared with the native enzyme immobilized on glyoxyl-agarose.     

Thermodynamically controlled synthesis of amide bonds catalyzed by highly organic solvent-resistant penicillin acylase derivatives

A study of various direct condensations between different amines, having very high pK values, and unmodified acyl donors has been performed. This has been possible by the use of a very stable PGA derivative. First, it has been found that the higher the cosolvent concentration, the higher the pK of the acyl donor and thus the higher the yield. Therefore, these high concentrations of cosolvents seem to be a requisite for certain enzymatic condensations. Using ethanolamine and 2-hydroxy-2-phenylethyl-amine as nucleophiles and phenyl acetic acid as the acyl donor, the increase in the diglyme concentration from 50 to 90% (v/v) permitted improvement of not only the yield (reaching values higher than 99% in both cases) but also the reaction rates (by 360- or 3-fold, respectively). However, even when using PGA preparations stabilized by multipoint covalent attachment, it was not possible to obtain these results by inactivation of the enzyme derivative. Thus, in the protection of the octylamine with phenylacetic acid in 90% diglyme, the enzymatic activity was more than 20-fold higher using the hydrophilized derivative than the glyoxyl PGA, which allowed us to obtain a yield higher than 99%. Thus, the use of hydrophilized derivatives that are very stable even in the presence of high concentrations of organic solvents opens new opportunities in the use of PGA in organic chemistry.     

Structural and functional stabilization of L-asparaginase via multisubunit immobilization onto highly activated supports

A new protocol for the stabilization of the quaternary structure of multimeric enzymes has been attempted using as model enzyme (tetrameric) L-asparaginase from Escherichia coli. Such strategy is based upon multisubunit covalent immobilization of the enzyme onto activated supports (agarose-glutaraldehyde). Supports activated with different densities of reactive groups were used; the higher the density of groups, the higher the stabilization attained. However, because of the complexity of that enzyme, even the use of the highest densities of reactive groups was not enough to encompass all four subunits in the immobilization process. Therefore, a further chemical intersubunit cross-linking with aldehyde-dextran was pursued; these derivatives displayed a fully stabilized multimeric structure. In fact, boiling the modified enzyme derivative in the presence of sodium dodecyl sulfate and beta-mercaptoethanol did not lead to release of any enzyme subunit into the medium. Such a derivative, prepared under optimal conditions, retained ca. 40% of the intrinsic activity of the free enzyme and was also functionally stabilized, with thermostabilization enhancements of ca. 3 orders of magnitude when compared with its soluble counterpart. This type of derivative may be appropriate for extracorporeal devices in the clinical treatment of acute leukemia and might thus bring about inherent advantages in that all subunits are covalently bound to the support, with a longer half-life and a virtually nil risk of subunit release into the circulating blood stream.     

Epoxy sepabeads: a novel epoxy support for stabilization of industrial enzymes via very intense multipoint covalent attachment

Sepabeads-EP (a new epoxy support) has been utilized to immobilize-stabilize the enzyme penicillin G acylase (PGA) via multipoint covalent attachment. These supports are very robust and suitable for industrial purposes. Also, the internal geometry of the support is composed by cylindrical pores surrounded by the convex surfaces (this offers a good geometrical congruence for reaction with the enzyme), and it has a very high superficial density of epoxy groups (around 100 micromol/mL). These features should permit a very intense enzyme-support interaction. However, the final stability of the immobilized enzyme is strictly dependent on the immobilization protocol. By using conventional immobilization protocols (neutral pH values, nonblockage of the support) the stability of the immobilized enzyme was quite similar to that achieved using Eupergit C to immobilize the PGA. However, when using a more sophisticated three-step immobilization/stabilization/blockage procedure, the Sepabeads derivative was hundreds-fold more stable than Eupergit C derivatives. The protocol used was as follows: (i) the enzyme was first covalently immobilized under very mild experimental conditions (e.g., pH 7.0 and 20 degrees C); (ii) the already immobilized enzyme was further incubated under more drastic conditions (higher pH values, long incubation periods, etc.) in order to "facilitate" the formation of new covalent linkages between the immobilized enzyme molecule and the support; (iii) the remaining epoxy groups of the support were blocked with very hydrophilic compounds to stop any additional interaction between the enzyme and the support. This third point was found to be critical for obtaining very stable enzymes: derivatives blocked with mercaptoethanol were much less stable than derivatives blocked with glycine or other amino acids. This was attributed to the better masking of the hydrophobicity of the support by the amino acids (having two charges).     

Overproduction of Thermus sp. Strain T2 beta-galactosidase in Escherichia coli and preparation by using tailor-made metal chelate supports

A novel thermostable chimeric beta-galactosidase was constructed by fusing a poly-His tag to the N-terminal region of the beta-galactosidase from Thermus sp. strain T2 to facilitate its overexpression in Escherichia coli and its purification by immobilized metal-ion affinity chromatography (IMAC). The poly-His tag fusion did not affect the activation, kinetic parameters, and stability of the beta-galactosidase. Copper-iminodiacetic acid (Cu-IDA) supports enabled the most rapid adsorption of the His-tagged enzyme, favoring multisubunit interactions, but caused deleterious effects on the enzyme stability. To improve the enzyme purification a selective one-point adsorption was achieved by designing tailor-made low-activated Co-IDA or Ni-IDA supports. The new enzyme was not only useful for industrial purposes but also has become an excellent model to study the purification of large multimeric proteins via selective adsorption on tailor-made IMAC supports.     

Use of dextrans as long and hydrophilic spacer arms to improve the performance of immobilized proteins acting on macromolecules

New dextran-agarose supports, suitable for covalent immobilization of enzymes and proteins acting on macromolecular substrates, were prepared. The thick internal fibers of agarose gels were covered by a low-density layer of long, flexible, hydrophilic, and inert dextran molecules. Rennin and protein A were immobilized on these novel supports and the resulting derivatives exhibited a very high capacity for biological recognition of soluble macromolecular substrates. Caseinolytic activity of this immobilized enzyme was 15-fold higher than activity of directly immobilized rennin, through short spacer arms, on agarose gels. Similarly, the new derivatives of immobilized protein A were able to adsorb up to 2 molecules of immunoglobulin per each molecule of immobilized protein A. When the immobilized proteins were secluded away from the support surface by using these new long and hydrophilic spacer arms, they exhibit minimal steric hindrances that could be promoted by the proximity of the support surface.     

Genetic Modification of the Penicillin G Acylase Surface To Improve Its Reversible Immobilization on Ionic Exchangers

A new mutant of the industrial enzyme penicillin G acylase (PGA) from Escherichia coli has been designed to improve its reversible immobilization on anionic exchangers (DEAE- or polyethyleneimine [PEI]-coated agarose) by assembling eight new glutamic residues distributed homogeneously through the enzyme surface via site-directed mutagenesis. The mutant PGA is produced and processed in vivo as is the native enzyme. Moreover, it has a similar specific activity to and shows the same pH activity profile as native PGA; however, its isoelectric point decreased from 6.4 to 4.3. Although the new enzyme is adsorbed on both supports, the adsorption was even stronger when supports were coated with PEI, allowing us to improve the enzyme stability in organic cosolvents. The use of restrictive conditions during the enzyme adsorption on anionic exchangers (pH 5 and high ionic strength) permitted us to still further increase the strength of adsorption and the enzyme stability in the presence of organic solvents, suggesting that these conditions allow the penetration of the enzyme inside the polymeric beds, thus becoming fully covered with the polymer. After the enzyme inactivation, it can be desorbed to reuse the support. The possibility to improve the immobilization properties on an enzyme by site-directed mutagenesis of its surface opens a promising new scenario for enzyme engineering.