Disruption of fungal and bacterial biofilms by lauroyl glucose

Aim: The ability of enzymatically synthesized lauroyl glucose to disrupt fungal (Candida albicans, Candida lipolytica) and bacterial (Pseudomonas aeruginosa PAO1, Pseudomonas aureofaciens) biofilms was investigated. Methods and Results: Preformed biofilms of C. albicans and C. lipolytica in polystyrene microtitre plates were disrupted upto 45% and 65%, respectively, while P. aeruginosa and P. aureofaciens biofilms were disrupted by 51% and 57%. Precoating of the microtitre wells with lauroyl glucose affected cell attachment and biofilm growth of all the cultures to a lesser extent. With C. albicans and C. lipolytica, there was 11% and 32% decrease in the development of biofilms, respectively. With P. aeruginosa and P. aureofaciens, the reduction was 21% and 12% after 48 h. Lauroyl glucose effectively inhibited the formation of biofilms on glass slide surfaces when added along with the inoculum. Analysis by confocal laser scanning microscopy showed that the growth of the biofilms was lesser as compared with the control experiments. Lauroyl glucose displayed minimum inhibitory concentration values >500 μg ml^?1 for the test cultures and was comparable to that obtained with acetyl salicylate. Conclusion: Lauroyl glucose reduces biofilm growth of all the four test cultures on polystyrene and glass surfaces. Significance and Impact of the Study: This report is a novel application of the enzymatically synthesized, environmental‐friendly nonionic surfactant.     

Morphogenetic behavior of tropical marine yeast Yarrowia lipolytica in response to hydrophobic substrates

The morphogenetic behavior of a tropical marine Yarrowia lipolytica strain on hydrophobic substrates was studied. Media containing coconut oil or palm kernel oil (rich in lauric and myristic acids) prepared in distilled water or seawater at a neutral pH supported 95% of the cells to undergo a transition from the yeast form to the mycelium form. With potassium laurate, 51% of the cells were in the mycelium form, whereas with myristate, 32% were in the mycelium form. However, combinations of these two fatty acids in proportions that are present in coconut oil or palm kernel oil enhanced the mycelium formation to 65%. The culture also produced extracellular lipases during the morphogenetic change. The yeast cells were found to attach to the large droplets of the hydrophobic substrates during the transition, while the mycelia were associated with the aqueous phase. The alkane-grown yeast partitioned more efficiently in the hydrophobic phases when compared with the coconut oil-grown mycelia. A fatty acid analysis of the mycelial form revealed the presence of lauric acid in addition to the long-chain saturated and unsaturated fatty acids observed in the yeast form. The mycelia underwent a rapid transition to the yeast form with n-dodecane, a medium-chain aliphatic hydrocarbon. Thus, the fungus displayed a differential behavior towards the two types of saturated hydrophobic substrates.     

Environmental and industrial applications of Yarrowia lipolytica

Yarrowia lipolytica is a fungus that degrades hydrophobic substrates very efficiently. The fungus displays several important characteristics that have encouraged researchers to study various basic biological and biotechnological applications in detail. Although the organism has been used as model system for studying dimorphism, salt tolerance, heterologous protein expression, and lipid accumulation, there are no recent reviews on the environmental and industrial applications of this organism. Included here are applications in bioremediation of environments contaminated with aliphatic and aromatic compounds, organic pollutants, 2,4,6-trinitrotoluene, and metals. A variety of industrially important recent processes for the synthesis of β-hydroxy butyrate, l-dopa, and emulsifiers have also been reviewed. Production of unique inherent enzymes (inulinases, α-mannosidases), novel applications of esterases and lipases, and the use of the fungus for heterologous expression of biotechnologically relevant products have also been highlighted. The review while entailing a general overview focuses critically on some of the recent advances on the applications of this yeast. The examples cited here demonstrate the use of wild-type, mutant as well as genetically manipulated strains of Y. lipolytica for the development of different products, processes, and technologies. This also throws light on how a single organism can be versatile with respect to its metabolic abilities and how it can be exploited for a variety of purposes. This review will thus form a base for future developments in this field.     

Anti-biofilm potential of a glycolipid surfactant produced by a tropical marine strain of Serratia marcescens

A tropical marine bacterium isolated from the hard coral, Symphyllia sp. was identified as Serratia marcescens on the basis of morphological, biochemical and 16S rDNA analysis. The bacterium showed antimicrobial activity towards the pathogens Candida albicans and Pseudomonas aeruginosa and the marine biofouling bacterium Bacillus pumilus. S. marcescens displayed biosurfactant activity as evidenced by drop collapse, blood hemolysis and surface tension reduction (52.0-27 mN m(-1)). The active compound was purified by solvent extraction and silicic acid chromatography. Characterization was by thin layer chromatography, gas chromatography mass spectroscopy (GC-MS), Fourier transform infrared (FTIR) spectroscopy and (1)H as well as (13)C nuclear magnetic resonance (NMR) analysis. The surfactant was found to be a glycolipid composed of glucose and palmitic acid. The glycolipid prevented adhesion of C. albicans BH, P. aeruginosa PAO1 and B. pumilus TiO1. The glycolipid also disrupted preformed biofilms of these cultures in microtitre plates. Confocal laser scanning microscopy and electron microscopy confirmed the effective removal of biofilms from glass surfaces. The glycolipid derived from S. marcescens could thus serve as a potential anti-biofilm agent.     

Double-stranded RNA from a marine alkane-degrading yeast Yarrowia lipolytica

A strain of Yarrowia lipolytica isolated from a tropical estuarine environment showed the presence of a double-stranded RNA. The double-stranded RNA had a molecular size of 5kb and a G+C content of 61 mole%. The strain was not a killer. No specific physiological function could be assigned to this plasmid.     

Palm oil mill effluent treatment by a tropical marine yeast

Palm oil mill effluent (POME), from a factory site in India contained about 250,000 mg l(-1) chemical oxygen demand (COD), 11,000 mg l(-1) biochemical oxygen demand, 65 mg l(-1) total dissolved solids and 9000 mg l(-1) of chloroform-soluble material. Treatment of this effluent using Yarrowia lipolytica NCIM 3589, a marine hydrocarbon-degrading yeast isolated from Mumbai, India, gave a COD reduction of about 95% with a retention time of two days. Treatment with a chemical coagulant further reduced the COD and a consortium developed from garden soil clarified the effluent and adjusted the pH to between 6 and 7. The complete treatment reduced the COD content to 1500 mg l(-1) which is a 99% reduction from the original.     

Polylactic acid: synthesis and biomedical applications

Social and economic development has driven considerable scientific and engineering efforts on the discovery, development and utilization of polymers. Polylactic acid (PLA) is one of the most promising biopolymers as it can be produced from nontoxic renewable feedstock. PLA has emerged as an important polymeric material for biomedical applications on account of its properties such as biocompatibility, biodegradability, mechanical strength and process ability. Lactic acid (LA) can be obtained by fermentation of sugars derived from renewable resources such as corn and sugarcane. PLA is thus an eco-friendly nontoxic polymer with features that permit use in the human body. Although PLA has a wide spectrum of applications, there are certain limitations such as slow degradation rate, hydrophobicity and low impact toughness associated with its use. Blending PLA with other polymers offers convenient options to improve associated properties or to generate novel PLA polymers/blends for target applications. A variety of PLA blends have been explored for various biomedical applications such as drug delivery, implants, sutures and tissue engineering. PLA and their copolymers are becoming widely used in tissue engineering for function restoration of impaired tissues due to their excellent biocompatibility and mechanical properties. The relationship between PLA material properties, manufacturing processes and development of products with desirable characteristics is described in this article. LA production, PLA synthesis and their applications in the biomedical field are also discussed.     

Disruption of Yarrowia lipolytica biofilms by rhamnolipid biosurfactant

Background

Biosynthesis of nanoparticles has received increasing attention due to the growing need to develop safe, time-effective and environmentally friendly technologies for nano-materials synthesis. This paper reports the one pot green synthesis of silver nanoparticles (AgNPs) using the leaf bud extract of a mangrove plant, Rhizophora mucronata and their antimicrobial effects against aquatic pathogens. Highly stable AgNPs were synthesized by treating the mangrove leaf bud extract with aqueous silver nitrate solution at 15?psi pressure and 121°C for 5 minutes.

Results

The biosynthesized AgNPs were characterized by UV-visible spectrum, at 426?nm. The X-Ray Diffraction (XRD) pattern revealed the face-centered cubic geometry of AgNPs. Fourier Transform Infra Red (FTIR) spectroscopic analysis was carried out to identify the possible biomolecules responsible for biosynthesis of AgNPs from the leaf bud extract. The size and shape of the well-dispersed AgNPs were documented with the help of High Resolution Transmission Electron Microscopy (HRTEM) with a diameter ranged from 4 to 26?nm. However a maximum number of particles were observed at 4?nm in size. The antibacterial effects of AgNPs were studied against aquatic pathogens Proteus spp., Pseudomonas fluorescens and Flavobacterium spp., isolated from infected marine ornamental fish, Dascyllus trimaculatus.

Conclusion

This study reveals that the biosynthesized AgNPs using the leaf bud extract of a mangrove plant (R. mucronata) were found equally potent to synthetic antibiotics. The size of the inhibition zone increases when the concentration of the AgNPs increased and varies according to species.     

Heavy metal tolerance in marine strains of Yarrowia lipolytica

Heavy metal tolerance of two marine strains of Yarrowia lipolytica was tested on solid yeast extract peptone dextrose agar plates. Based on minimum inhibitory concentration esteems, it is inferred that the two strains of Y. lipolytica were tolerant to heavy metals such as Pb(II), Cr(III), Zn(II), Cu(II), As(V), and Ni(II) ions. The impact of various heavy metal concentrations on the growth kinetics of Y. lipolytica was likewise assessed. With increased heavy metal concentration, the specific growth rate was reduced with delayed doubling time. Furthermore, biofilm development of both yeasts on the glass surfaces and in microtitre plates was assessed in presence of different heavy metals. In microtitre plates, a short lag phase of biofilm formation was noticed without the addition of heavy metals in yeast nitrogen base liquid media. A lag phase was extended over increasing metal concentrations of media. Heavy metals like Cr(VI), Cd(II), and As(V) are contrastingly influenced on biofilms’ formation of microtitre plates. Other heavy metals did not much influence on biofilms development. Thus, biofilm formation is a strategy of Y. lipolytica under stress of heavy metals has significance in bioremediation process for recovery of heavy metals from contaminated environment.