Bioprocess engineering of <Emphasis Type="Italic">Echium italicum</Emphasis> L.: induction of shikonin and alkannin derivatives by two-liquid-phase suspension cultures

An in vitro cell suspension culture of Echium italicum was established and assayed for the production of shikonin and alkannin derivatives. Callus tissues were induced from cotyledon explants of the plant incubated onto the solidified B5 medium. A two-liquid-phase system suspension culture was then established to elicit pigments of shikonin and alkannin derivatives using liquid paraffin. The presence of liquid paraffin efficiently induced production of pigments in cultured cells. The production and/or accumulation of these compounds in the E. italicum cells was examined using fluorescence microscopy as the naphthoquinone molecules display autofluorescent properties. Phytochemical analysis of the n-hexane extract of the medium was also carried out using preparative HPLC. The chemical structure of shikonin and alkannin derivatives were characterized by UV, 1H-NMR, and 13C-NMR techniques. Based on our findings, this bioprocess engineering approach resulted in induction of shikonin and alkannin derivatives, whereupon it may be recruited for production of these important secondary metabolites.     

Electromembrane extraction of trace amounts of naltrexone and nalmefene from untreated biological fluids

Nalmefene and naltrexone are used to block the effects of narcotics and alcohol. In the present work, for the first time a microextraction technique was presented to reduce matrix interferences and improve detection limits of the drugs in urine and plasma samples. Electromembrane extraction (EME) followed by high performance liquid chromatography (HPLC) coupled with ultraviolet (UV) detection was optimized and validated for quantification of nalmefene and naltrexone from biological fluids. The membrane consists 85% of 2-nitrophenyl octyl ether (NPOE) and 15% di-(2-ethylhexyl) phosphate (DEHP) immobilized in the pores of a hollow fiber. A 100 V electrical field was applied to make the analytes migrate from sample solution with pH 2.0, through the supported liquid membrane (SLM) into an acidic acceptor solution with pH 1.0 which was located inside the lumen of hollow fiber. Extraction recoveries in the range of 54% and 75% were obtained in different biological matrices which resulted in preconcentration factors in the range of 109-149 and satisfactory repeatability (2.0相似文献   

Magnetic Nanoparticle-Based Solid-Phase Extraction of Vitamin B12 from Pharmaceutical Formulations

In the present study, a novel quantitative method, namely magnetic nanoparticle-based solid-phase extraction (MSPE), was applied to extract vitamin B(12) from pharmaceutical formulations. The technique involves the use of Fe(3)O(4) nanoparticles modified by sodium dodecyl sulfate (SDS) as an efficient adsorbent for solid-phase extraction of vitamin B(12). Collection of magnetic nanoparticles (MNPs) from aqueous solution was simply achieved by applying external magnetic field. The analyte was desorbed from MNPs using alkali 1-propanol. The extracted analyte was analyzed by using flow injection inductively coupled plasma-optical emission spectrometry. Factors affecting the extraction efficiency were investigated and optimized. Under the optimum conditions, enhancement factor of 184, linear dynamic range of 2.5-500 μg L(-1) with correlation of determination (R(2) > 0.999), and limit of detection of 1.0 μg L(-1) were obtained for vitamin B(12). The percent relative standard deviation based on five-replicate determination was less than 6.2%. The method was successfully applied for extraction and determination of vitamin B(12) in different types of pharmaceutical samples such as multivitamin tablet, effervescent tablet, and injection sample. The results showed that the proposed method based on SDS-Fe(3)O(4) MSPE was a simple, accurate, and highly efficient approach for analysis of vitamin B(12).     

Novel water-soluble polyurethane nanomicelles for cancer chemotherapy: physicochemical characterization and cellular activities

Background  

Efficient delivery of anticancer chemotherapies such as paclitaxel (PTX) can improve treatment strategy in a variety of tumors such as breast and ovarian cancers. Accordingly, researches on polymeric nanomicelles continue to find suitable delivery systems. However, due to biocompatibility concerns, a few micellar nanoformulations have exquisitely been translated into clinical uses. Here, we report the synthesis of novel water-soluble nanomicelles using bioactive polyurethane (PU) polymer and efficient delivery of PTX in the human breast cancer MCF-7 cells.     

Hollow fiber liquid phase microextraction followed by high performance liquid chromatography for determination of ultra-trace levels of Se(IV) after derivatization in urine,plasma and natural water samples

In the present work, a simple and high sensitive method based on hollow fiber liquid phase microextraction (HF-LPME) was developed followed by high performance liquid chromatography (HPLC) for determination of ultra-trace amounts of Se(IV) after derivatization in biological and natural water samples. Se(IV) was complexed with o-phenylenediamine to form piazselenol. The formed piazselenol was extracted into 20 μL of 1-octanol located in the lumen of a hollow fiber and the solution was injected into HPLC-UV for analysis. Using the Taguchi method, an orthogonal array design (OAD), OA₁₆ (4⁵) was employed to optimize the HF-LPME of piazselenol. The effect of five experimental factors (each factor at four levels) including the volume of the organic phase, extraction time, pH of the solution, stirring rate and ionic strength on the extraction efficiency of piazselenol was studied and optimized. The maximum extraction efficiency of piazselenol was obtained at 20 μL of 1-octanol as the extracting solvent, 30 min extraction time, pH 2, stirring rate of 500 rpm and 30% (w/v) NaCl. Under the optimum conditions, preconcentration factors up to 130 were achieved and the relative standard deviation (%RSD) of the method was <3.7% for different concentrations of Se(IV). The calibration curves were obtained in the ranges of 0.2–100 and 0.05–10 μg L^?1 for the 11 and 50 mL of the sample volumes with reasonable linearity, respectively (r² > 0.995). The limits of detection (LOD) were 0.1 and 0.02 μg L^?1 for the 11 and 50 mL sample volumes, respectively (S/N = 3). Finally, the applicability of the proposed method was evaluated by the extraction and determination of Se(IV) in the plasma, urine and water samples.     

Mitochondria-targeted antioxidant mito-TEMPO alleviate oxidative stress induced by antimycin A in human mesenchymal stem cells

The cell therapy of damaged tissue, which is linked to hypoxia condition might fail, in large part due to the emergence of oxidative stress (OS) and/or mitochondrial dysfunctions. Thus, the invigoration of stem cells against oxidative stress could be a reliable strategy to improve the cell therapy outcome. Of various antioxidants, mito-Tempo (mito-T) is one of the potent antioxidants that could target and neutralize the mitochondrial oxidative stress. In this study, for the induction of hypoxia and oxidative stress in mitochondria of the mesenchymal stem cells (MSCs) isolated from human adipose tissue, antimycin A (AMA) was used and then several parameters were analyzed, including cell viability and cell cycle arrest of MSCs exposed to AMA, mito-T, antioxidant potential, redox homeostasis, and signaling pathways in MSCs under oxidative stress. Based on our findings, the treated MSCs were found to impose a high resistance to the OS-induced apoptosis, which correlated with the nuclear factor erythroid 2-related factor 2 (Nrf2) pathway required to manage OS. Upon exposure of the MSCs to high oxidative stress conditions using AMA, the cells failed to scavenge. The use of mito-T was found to alleviate the damage induced by oxidative stress through both direct functions of the free radical scavenging and the interplay in terms of cell signaling pathways including the upregulation of the Nrf2 pathway. These findings may pave the way in the stem cell therapy for the hypoxia-mediated tissue damage.     

Stalosylglobotetraosylceramide: A marker for amyotropic lateral sclerosis

Gangliosides of healthy and pathologic muscles (amyotropic lateral sclerosis and facio-scapulo-humeral muscular dystrophy) were studied. Total ganglioside content of the affected muscles was approximately 2 fold higher than the unaffected muscles. Our results showed that ALS muscle contained a ganglioside which was absent in the unaffected and FSH muscular dystrophic muscles. Based on the results of hydrolysis with $\text{Vibrio cholerae}$ neuraminidase and subsequent reactivity of the asialo derivative towards anti-globotetraosylceramide, we propose that the ALS ganglioside is sialosylglobtetraosylceramide, NeuAc(α2–3)GalNAc(β1–3)Gal(α1–4)Gal(β1–4)Glc-Cer.     

A robust universal method for extraction of genomic DNA from bacterial species

The intactness of DNA is the keystone of genome-based clinical investigations, where rapid molecular detection of life-threatening bacteria is largely dependent on the isolation of high-quality DNA. Various protocols have been so far developed for genomic DNA isolation from bacteria, most of which have been claimed to be reproducible with relatively good yields of high-quality DNA. Nonetheless, they are not fully applicable to various types of bacteria, their processing cost is relatively high, and some toxic reagents are used. The routine protocols for DNA extraction appear to be sensitive to species diversity, and may fail to produce high-quality DNA from different species. Such protocols remain time-consuming and tedious, thus to resolve some of these impediments, we report development of a very simple, rapid, and high-throughput protocol for extracting of high-quality DNA from different bacterial species. Based upon our protocol, interfering phenolic compounds were removed from extraction using polyvinylpyrrolidone (PVP) and RNA contamination was precipitated using LiCl. The UV spectrophotometry and gel electrophoresis analysis resulted in high A ₂₆₀/A ₂₈₀ ratio (>1.8) with high intactness of DNA. Subsequent evaluations were performed using some quality-dependent techniques (e.g., RAPD marker and restriction digestions). The isolated DNA from 9 different bacterial species confirmed the accuracy of this protocol which requires no enzymatic processing and accordingly its low-cost making it an appropriate method for large-scale DNA isolation from various bacterial species.