Sample preparation and high-resolution separation of mycotoxins possessing carboxyl groups

The chromatographic analysis of carboxyl-containing mycotoxins, such as fumonisin B₁, ochratoxin A, and citrinin, presents a continual challenge. Toxins must first be extracted from foods or tissues and then cleaned up before chromatographic separation and detection. Liquid–liquid extraction efficiencies for some carboxylic mycotoxins are marginal for spiked samples and uncertain for incurred residues. Immunoaffinity columns may be useful for concentrating mycotoxins from samples before chromatography. In almost every case, more than one analytical method must be used to confirm the identification of the mycotoxin. The fumonisins are especially troublesome to analyze because they are relatively insoluble in organic solvents, they are not separated easily by gas chromatography, and they do not respond to the usual absorbance or fluorescence detectors used in liquid chromatography. Fluorescence derivatization and electrospray liquid chromatography–mass spectrometry have now made it possible to detect trace levels of mycotoxins. The purity of mycotoxin standards for toxicological studies can be determined by liquid chromatography with either an evaporative light scattering detector or electrospray mass spectrometer. New developments in capillary electrophoresis, nonporous microsphere liquid chromatography, and detection methods for low-volatility compounds show promise for improving the analysis of mycotoxins in the future.     

Role of cell-mediated immunity in the resistance to experimental sporotrichosis in mice

The in vitro activity of several new imidazoles, cloconazole, sulconazole, butoconazole, isoconazole and fenticonazole, were compared with those of amphothericin B, flucytosine, and three azoles: econazole, miconazole and ketoconazole against isolates of pathogenic Candida. A total of 186 clinical isolates of 10 species of the genus Candida and two culture collection strains were tested by an agar-dilution technique. Isoconazole was the most active azole, followed by butoconazole and sulconazole. Differences between some of the species in their susceptibility to the antifungal agents were noted. Sulconazole and cloconazole had the highest activity in vitro against 106 isolates of C. albicans. Butoconazole and isoconazole were also very active against isolates of C. albicans, and were the most active azole compounds against 80 isolates of Candida spp.     

The slow, tight binding of bestatin and amastatin to aminopeptidases

Bestatin reversibly inhibits Aeromonas aminopeptidase (EC 3.4.11.10) in a process that is remarkable for its unusual degree of time dependence. The binding of bestatin by both Aeromonas aminopeptidase and cytosolic leucine aminopeptidase (EC 3.4.11.1) is slow and tight, with Ki values (determined from rate constants) of 1.8 X 10(-8) and 5.8 X 10(-10) M, respectively. In contrast, microsomal aminopeptidase (EC 3.4.11.2) binds bestatin in a rapidly reversible process with a Ki value of 1.4 X 10(-6) M. Kinetic analysis of the slow inhibition observed is facilitated by the use of a variety of experimental treatments, primarily measurements made during pre-equilibrium; however, careful selection of conditions permits use also of steady state observations. When titrated with bestatin, 1 mol of cytosolic leucine aminopeptidase (containing 6 g atoms each of zinc and manganese) is rendered 80% inactive by 1 mol of inhibitor, thus suggesting that enzymatic activity depends on one active site/hexamer; titration of Aeromonas aminopeptidase by bestatin reveals a 1:1 stoichiometry. Amastatin inhibits all three aminopeptidases through the mechanism of slow, tight binding with Ki values ranging from 3.0 X 10(-8) to 2.5 X 10(-10) M. This behavior of microsomal aminopeptidase contrasts sharply with its rapidly reversible inhibition by bestatin. The slow, tight binding observed with five of the six aminopeptidase-inhibitor pairs investigated suggests the formation of a transition state analog complex between the enzyme and inhibitor. Physical evidence consistent with this possibility was provided by the observation that both bestatin and amastatin perturb the absorption spectrum of cobalt Aeromonas aminopeptidase.     

DETERMINATION OF GUSTATORY SUCROSE THRESHOLD IN WATER BY USE OF A LINEAR SUCROSE GRADIENT

A novel experimental method was developed which allows the determination of the threshold concentration of sucrose by use of a linear sucrose gradient in water. With this method a continuous tasting of the test-liquid is possible. A panel of 15 persons experienced in taste-testing was used. Three gradients of different steepness were applied: 0 to 1.5% (w/w) sucrose in 2 min (I), 3 min (II) and 4 min (III). The results of the new method were compared with those of the standard method (DIN). With gradients I and II we found values which were significantly higher than those of the standard method (I: 0.49% (w/w); II: 0.46% (w/w); DIN: 0.31% (w/w)), whereas with gradient III the same threshold value was found as with the DIN-Method (III: 0.32% (w/w)).     

Theoretical conformational analysis of the opioid δ antagonist H-Tyr-Tic-Phe-OH and the μ agonist H-Tyr-D-Tic-Phe-NH2

A molecular mechanics study (grid search and energy minimization) of the highly δ receptor-selective δ opioid antagonist H-Tyr-Tic-Phe-OH (TIP; Tic: tetrahydroisoquinoline-3-car-boxylic acid) resulted in four low energy conformers with energies within 2 kcal/mol of that of the lowest energy structure. These four conformers contain trans peptide bonds only and represent compact structures showing various patterns of aromatic ring stacking. The centrally located Tic residue imposes several conformational constraints on the N-terminal dipeptide segment; however, the results of molecular dynamics simulations indicated that this tripeptide still shows some structural flexibility, particularly at the Phe³ residue. Analogous studies performed with the structurally related μ receptor-selective μ agonist H-Tyr-D -Tic-Phe-NH₂ resulted in low energy structures that were also compact but showed patterns of ring stacking different from those obtained with TIP. Superim-position of low energy conformers of TIP and H-Tyr-D -Tic-Phe-NH₂ revealed that the Phe³ residues of the L -Tic- and the D -Tic peptide were always located on opposite sides of the plane defined by the Tic residue, thus providing an explanation for the distinct activity profiles of the two compounds in structural terms. Attempts to demonstrate spatial overlap between the pharmacophoric moieties of low energy conformers of TIP and the nonpeptide δ antagonist naltrindole were made by superimposing either the Tyr¹ and Tic² aromatic rings and the N-terminal amino group or the Tyr¹ and Phe³ aromatic rings and the N-terminal amino group of the peptide with the corresponding aromatic rings and nitrogen atom in the alkaloid structure. In each case a low energy structure of TIP was found that showed good spatial overlap of all three specified pharmacophoric groups. These two conformers may represent candidate structures for the δ receptor-bound conformation of TIP. © 1994 John Wiley & Sons, Inc.     

Biotransformation of diphenyl ether by the yeastTrichosporon beigelii SBUG 752

Trichosporon beigelii SBUG 752 was able to transform diphenyl ether. By TLC, HPLC, GC, GC-MS, NMR- and UV-spectroscopy, several oxidation products were identified. The primary attack was initiated by a monooxygenation step, resulting in the formation of 4-hydroxydiphenyl ether, 2-hydroxydiphenyl ether and 3-hydroxydiphenyl ether (48:47:5). Further oxidation led to 3,4-dihydroxydiphenyl ether. As a characteristic product resulting from the cleavage of an aromatic ring, the lactone of 2-hydroxy-4-phenoxymuconic acid was identified. The possible mechanism of ring cleavage to yield this metabolite is discussed.