Structure and immunochemistry of an oligosaccharide repeating unit of the capsular polysaccharide of type III group B Streptococcus. A revised structure for the type III group B streptococcal polysaccharide antigen

We have derived oligosaccharides from the capsular polysaccharide of type III group B Streptococcus by enzymatic hydrolysis of a specific backbone glycosidic bond utilizing an endo-beta-galactosidase from Flavobacterium keratolyticus. Enzymatic digestion of the polysaccharide produced oligosaccharide fragments of one or more pentasaccharide repeating units. On the basis of 13C NMR, 1H NMR, and methylation analyses, it was established that the smallest digestion fragment was alpha-D-NeupNAc-(2----3)-beta-D-Galp-(1----4)-[beta-D-Glcp-(1----6 )]- beta-D-GlcpNAc-(1----3)-beta-D-Gal. The isolation of this oligosaccharide is consistent with the susceptibility of the beta-D-Galp-(1----4)-beta-D-Glcp linkage in the backbone of the type III group B streptococcal polysaccharide and confirms that the polysaccharide is composed of a pentasaccharide repeating unit. High resolution 13C NMR spectroscopic studies indicated that, as in the case of the pentasaccharide, the terminal sialic acid residues of the type III group B streptococcal polysaccharide were linked to O-3 and not to O-6 of its branch beta-D-galactopyranosyl residues as had been previously reported (Jennings, H. J., Rosell, K.-G., and Kasper, D. L. (1980) Can. J. Chem. 58, 112-120). This linkage was confirmed in an independent methylation analysis of the type III group B streptococcal polysaccharide. Thin layer chromatogram binding assay and radioactive antigen binding assays with radiolabeled oligosaccharides demonstrated the single repeating unit pentasaccharide oligosaccharide to be poorly antigenic. Increasing oligosaccharide size to a decasaccharide consisting of two repeating units resulted in an 8-fold increase in antigen binding in the direct radioactive antigen binding assay. The results suggest that a region of the immunodeterminant site critical for antibody binding is located in the backbone of the polysaccharide and involves the beta-D-galactopyranose-(1----4) beta-D-glucopyranose bond.     

Signal peptidase can cleave inside a polytopic membrane protein

The signal peptides of most proteins targeted to the endoplasmic reticulum are specifically cleaved by signal peptidase. Although potential cleavage sites occur frequently in polytopic proteins after membrane-spanning segments, processing is restricted to the first hydrophobic domain, suggesting that signal peptidase might not have access to subsequently translocated, internal domains. To test this hypothesis, we replaced the third transmembrane segment of an artificial threefold membrane-spanning protein by a sequence which is normally an amino-terminal signal. Upon in vitro translation and insertion into microsomes, efficient cleavage at this sequence was observed, thus demonstrating the ability of signal peptidase to cleave within polytopic membrane proteins.     

Rapid detection of chromosome 16 inversion in acute nonlymphocytic leukemia, subtype M4: regional localization of the breakpoint in 16p

The pericentric inversion of chromosome 16 characteristic for acute nonlymphocytic leukemia, subtype M4, was detected in five patients by means of nonradioactive in situ hybridization of complete cosmids. First, five cosmids situated along the short arm of chromosome 16 were used to map the breakpoint of the inversion distal to the rare folate-sensitive fragile site FRA16A. Then, the use of two cosmids on either side of the breakpoint, combined with a probe specific for the centromeric region of chromosome 16, readily detected the inversion, even in poor metaphase spreads.     

Insertion of a multispanning membrane protein occurs sequentially and requires only one signal sequence

To study the insertion of multispanning membrane proteins into the endoplasmic reticulum, we constructed novel proteins on the cDNA level by repeating, up to four times, the internal signal-anchor domain of the asialoglycoprotein receptor H1. Upon in vitro translation in the presence of microsomes, these polypeptides are indeed inserted as polytopic membrane proteins. The first hydrophobic domain functions as a signal and the second as a stop-transfer sequence, while the third initiates a second translocation process, halted again by the fourth. We were able to demonstrate that insertion occurs sequentially, starting with the first apolar segment from the amino terminus. By replacing the original signal-anchor domains by a mutant sequence not recognized by signal recognition particle (SRP), it was shown that only the first hydrophobic domain needs to be a signal sequence and that the second translocation event does not require SRP.     

Isolation of a replication region of a large lactococcal plasmid and use in cloning of a nisin resistance determinant

The replication region of a 28-kilobase-pair (kbp) cryptic plasmid from Lactococcus lactis subsp. lactis biovar diacetylactis SSD207 was cloned in L. lactis subsp. lactis MG1614 by using the chloramphenicol resistance gene from the streptococcal plasmid pGB301 as a selectable marker. The resulting 8.1-kbp plasmid, designated pVS34, was characterized further with respect to host range, potential cloning sites, and location of replication gene(s). In addition to lactococci, pVS34 transformed Lactobacillus plantarum and, at a very low frequency, Staphylococcus aureus but not Escherichia coli or Bacillus subtilis. The 4.1-kbp ClaI fragment representing lactococcal DNA in pVS34 contained unique restriction sites for HindIII, EcoRI, XhoII, and HpaII, of which the last three could be used for molecular cloning. A region necessary for replication was located within a 2.5-kbp fragment flanked by the EcoRI and ClaI restriction sites. A 3.8-kbp EcoRI fragment derived from a nisin resistance plasmid, pSF01, was cloned into the EcoRI site of pVS34 to obtain a nisin-chloramphenicol double-resistance plasmid, pVS39. From this plasmid, the streptococcal chloramphenicol resistance region was subsequently eliminated. The resulting plasmid, pVS40, contains only lactococcal DNA. Potential uses for this type of a nisin resistance plasmid are discussed.     

Intracellular vesicle movement, cAMP and myosin II in Dictyostelium

Dictyostelium amoebae were analyzed before and after rapid addition of 10(-6) M cAMP for cellular motility, dynamic shape changes, and intracellular particle movement. Before cAMP addition, amoebae moved in a persistent anterior fashion and were elongate with F-actin localized predominantly in the anterior pseudopod. Intracellular particles moved rapidly and anteriorly. Within seconds after 10(-6) M cAMP addition, cells stopped translocating, pseudopod formation ceased, intracellular particle movement was depressed, and F-actin was lost from the pseudopod and concomitantly relocalized in the cell cortex. After 10 seconds, expansion zones reappeared but were small and no longer anteriorly localized. Vesicle movement partially rebounded but was no longer anteriorly directed. The myosin II null mutant HS2215 exhibited both depressed cellular translocation and vesicle movement. The addition of cAMP to HS2215 cells did not result in any detectable change in the random, depressed movement of particles. The results with HS2215 suggest that myosin II is essential for (1) rapid cellular translocation, (2) cellular polarity, (3) rapid particle movement, (4) anteriorly directed particle movement, and (5) the cAMP response. Electron micrographs suggest that at least half of the particles examined in this study contain in turn smaller membrane bound vesicles or multilamellar membrane bodies. The possible role of these vesicles is discussed.     

Interfacial self-assembly of a hydrophobin into an amphipathic protein membrane mediates fungal attachment to hydrophobic surfaces.

The SC3p hydrophobin of Schizophyllum commune is a small hydrophobic protein (100-101 amino acids with eight cysteine residues) that self-assembles at a water/air interface and coats aerial hyphae with an SDS-insoluble protein membrane, at the outer side highly hydrophobic and with a typical rodlet pattern. SC3p monomers in water also self-assemble at the interfaces between water and oils or hydrophobic solids. These materials are then coated with a 10 nm thick SDS-insoluble assemblage of SC3p making their surfaces hydrophilic. Hyphae of S. commune growing on a Teflon surface became firmly attached and SC3p was shown to be present between the fungal cell wall and the Teflon. Decreased attachment of hyphae to Teflon was observed in strains not expressing SC3, i.e. a strain containing a targeted mutation in this gene and a regulatory mutant thn. These findings indicate that hydrophobins, in addition to forming hydrophobic wall coatings, play a role in adherence of fungal hyphae to hydrophobic surfaces.