Sulfamethizole attenuates poloxamer 407-induced atherosclerotic neointima formation via inhibition of mTOR in C57BL/6 mice

Mammalian target of Rapamycin C1 (mTORC1) inhibition limits plaque progression in atherosclerosis. The present study evaluated the protective effect of sulfamethizole on poloxamer 407-induced atherosclerotic neointima formation in C57BL/6 mice via mTOR inhibition. Poloxamer 407 (P-407) (0.5 g/kg body weight) was administered intraperitoneally to male C57BL/6 mice every third day for 148 days to induce chronic hyperlipidemia. From Day 121 to 148, animals were additionally administered Sulfamethizole (5, 10, and 50 mg/kg, p.o.), Rapamycin (0.5 mg/kg, positive control), or vehicle (1 ml/kg). Plasma lipid levels were measured on Days 120 and 148. Upon sacrifice, histological studies were performed, and aortic tissue interleukin (IL)-6, tumor necrosis factor-α (TNF-α), and mTOR levels were evaluated. A molecular docking study was carried out to mimic the interaction of sulfamethizole with mTOR protein. Chronic P-407 administration significantly (p < 0.001) elevated plasma lipid levels, compared with those of the normal control group. Chronic hyperlipidemia resulted in increased tunica intima thickness, collagen deposition, and IL-6, TNF-α, and mTOR levels. Treatment with Sulfamethizole attenuated these parameters significantly in a dose-dependent manner. Molecular docking studies showed a significant interaction of Sulfamethizole with mTOR. In conclusion, this study suggests that sulfamethizole significantly limits poloxamer 407-induced atherosclerotic neointima formation in C57BL/6 mice via mTOR inhibition.     

The Beta Cell in Its Cluster: Stochastic Graphs of Beta Cell Connectivity in the Islets of Langerhans

Pancreatic islets of Langerhans consist of endocrine cells, primarily α, β and δ cells, which secrete glucagon, insulin, and somatostatin, respectively, to regulate plasma glucose. β cells form irregular locally connected clusters within islets that act in concert to secrete insulin upon glucose stimulation. Due to the central functional significance of this local connectivity in the placement of β cells in an islet, it is important to characterize it quantitatively. However, quantification of the seemingly stochastic cytoarchitecture of β cells in an islet requires mathematical methods that can capture topological connectivity in the entire β-cell population in an islet. Graph theory provides such a framework. Using large-scale imaging data for thousands of islets containing hundreds of thousands of cells in human organ donor pancreata, we show that quantitative graph characteristics differ between control and type 2 diabetic islets. Further insight into the processes that shape and maintain this architecture is obtained by formulating a stochastic theory of β-cell rearrangement in whole islets, just as the normal equilibrium distribution of the Ornstein-Uhlenbeck process can be viewed as the result of the interplay between a random walk and a linear restoring force. Requiring that rearrangements maintain the observed quantitative topological graph characteristics strongly constrained possible processes. Our results suggest that β-cell rearrangement is dependent on its connectivity in order to maintain an optimal cluster size in both normal and T2D islets.     

Hybrid Adeno-Associated Viral Vectors Utilizing Transposase-Mediated Somatic Integration for Stable Transgene Expression in Human Cells

Recombinant adeno-associated viral (AAV) vectors have been shown to be one of the most promising vectors for therapeutic gene delivery because they can induce efficient and long-term transduction in non-dividing cells with negligible side-effects. However, as AAV vectors mostly remain episomal, vector genomes and transgene expression are lost in dividing cells. Therefore, to stably transduce cells, we developed a novel AAV/transposase hybrid-vector. To facilitate SB-mediated transposition from the rAAV genome, we established a system in which one AAV vector contains the transposon with the gene of interest and the second vector delivers the hyperactive Sleeping Beauty (SB) transposase SB100X. Human cells were infected with the AAV-transposon vector and the transposase was provided in trans either by transient and stable plasmid transfection or by AAV vector transduction. We found that groups which received the hyperactive transposase SB100X showed significantly increased colony forming numbers indicating enhanced integration efficiencies. Furthermore, we found that transgene copy numbers in transduced cells were dose-dependent and that predominantly SB transposase-mediated transposition contributed to stabilization of the transgene. Based on a plasmid rescue strategy and a linear-amplification mediated PCR (LAM-PCR) protocol we analysed the SB100X-mediated integration profile after transposition from the AAV vector. A total of 1840 integration events were identified which revealed a close to random integration profile. In summary, we show for the first time that AAV vectors can serve as template for SB transposase mediated somatic integration. We developed the first prototype of this hybrid-vector system which with further improvements may be explored for treatment of diseases which originate from rapidly dividing cells.     

Nutrients determine the spatial architecture of Paracoccus sp. biofilm

Bacterial biofilms adapt and shape their structure in response to varied environmental conditions. A statistical methodology was adopted in this study to empirically investigate the influence of nutrients on biofilm structural parameters deduced from confocal scanning laser microscope images of Paracoccus sp.W1b, a denitrifying bacterium. High concentrations of succinate, Mg⁺⁺, Ca⁺⁺, and Mn⁺⁺ were shown to enhance biofilm formation whereas higher concentration of iron decreased biofilm formation. Biofilm formed at high succinate was uneven with high surface to biovolume ratio. Higher Mg⁺⁺ or Ca⁺⁺ concentrations induced cohesion of biofilm cells, but contrasting biofilm architectures were detected. Biofilm with subpopulation of pillar-like protruding cells was distributed on a mosaic form of monolayer cells in medium with 10 mM Mg⁺⁺. 10 mM Ca⁺⁺ induced a dense confluent biofilm. Denitrification activity was significantly increased in the Mg⁺⁺- and Ca⁺⁺-induced biofilms. Chelator treatment of various biofilm ages indicated that divalent cations are important in the initial stages of biofilm formation.     

Investigation of Thermal and Viscoelastic Properties of Polymers Relevant to Hot Melt Extrusion,IV: Affinisol™ HPMC HME Polymers

Most cellulosic polymers cannot be used as carriers for preparing solid dispersion of drugs by hot melt extrusion (HME) due to their high melt viscosity and thermal degradation at high processing temperatures. Three HME-grade hydroxypropyl methylcelluloses, namely Affinisol™ HPMC HME 15 cP, Affinisol™ HPMC HME 100 cP, and Affinisol™ HPMC HME 4 M, have recently been introduced by The Dow Chemical Co. to enable the preparation of solid dispersion at lower and more acceptable processing temperatures. In the present investigation, physicochemical properties of the new polymers relevant to HME were determined and compared with that of Kollidon^® VA 64. Powder X-ray diffraction (PXRD), modulated differential scanning calorimetry (mDSC), thermogravimetric analysis (TGA), moisture sorption, rheology, and torque analysis by melt extrusion were applied. PXRD and mDSC showed that the Affinisol™ polymers were amorphous in nature. According to TGA, the onset of degradation for all polymers was >220°C. The Affinisol™ polymers exhibited less hygroscopicity than Kollidon^® VA 64 and another HPMC polymer, Methocel™ K100LV. The complex viscosity profiles of the Affinisol™ polymers as a function of temperature were similar. The viscosity of the Affinisol™ polymers was highly sensitive to the shear rate applied, and unlike Kollidon^® VA 64, the viscosity decreased drastically when the angular frequency was increased. Because of the very high shear rate encountered during melt extrusion, Affinisol™ polymers showed capability of being extruded at larger windows of processing temperatures as compared to that of Kollidon^® VA 64.KEY WORDS: Affinisol™ HPMC HME, hot melt extrusion, hydroxypropyl methylcellulose, solid dispersion, thermal analysis, viscosity     

Molecular docking analysis of Clostridium perfringens beta toxin model with potential inhibitors from the ZINC database

Beta toxin from Clostridium perfringens after being secreted in gut is capable of causing necrotic enteritis in humans and several other animal species and does not respond to routinely used antibiotics. Therefore, there is a need to design an effective inhibitor for the Clostridium perfringens beta toxin (CPB) using cutting edge drug discovery technologies. Hence, potential CPB inhibitors were identified using computer aided screening of compounds from the ZINC database. Further, we document the molecular docking analysis of Clostridium perfringens beta toxin model (that revealed 4 binding pockets, A-D) with the identified potential inhibitors. We show that ZINC291192 [N-[(1-methylindol-3-yl) methyl eneamino]-7,10-dioxabicyclo[4.4.0]deca-2,4,11-triene-8- carboxamide] has optimal binding features with calculated binding energy of -10.38 kcal/mol and inhibition constant of 24.76 nM for further consideration.     

Sustained release implants of chloroquine phosphate for possible use in chemoprophylaxis of malaria

Implants of chloroquine phosphate (CQP) using biodegradable polymer, gelatin (G) and cross-linked gelatin (CLG) were prepared and evaluated to assess their physicochemical properties and in vitro release profile. The mechanism and kinetics of release were studied to correlate the release phenomenon with the formulation parameters. Out of many batches of the implants investigated, the implant prepared with 20% gelatin at 2:1 drug polymer ratio, 10% crosslinking agent and 2% plasticizer (Batch J) was found to provide optimum release behavior conforming to the requirements of a long term implant for a week. In vivo studies conducted on albino rats showed consistent therapeutic blood level over a period of 7 days. Mean residence time (MRT) of the drug released in the body, calculated as the ratio of the area under the first moment curve (AUMC) to area under concentration time curve (AUC) was 72 hr for implant against 2.42 hr for subcutaneous injection.     

SD-8, a novel therapeutic agent active against multidrug-resistant Gram positive cocci

Anti-bacterial drug resistance is one of the most critical concerns among the scientist worldwide. The novel antimicrobial decapeptide SD-8 is designed and its minimal inhibitory concentration and therapeutic index (TI) was found in the range of 1–8 μg/ml and 45–360, respectively, against major group of Gram positive pathogens (GPP). The peptide was also found to be least hemolytic at a concentration of 180 μg/ml, i.e., nearly 77 times higher than its average effective concentration. The kinetics assay showed that the killing time is 120 min for methicillin-sensitive Staphylococcus aureus (MSSA) and 90 min for methicillin-resistant S. aureus (MRSA). Membrane permeabilization is the cause of peptide antimicrobial activity as shown by the transmission electron microscopy studies. The peptide showed the anti-inflammatory property by inhibiting COX-2 with a K _D and K _i values of 2.36 × 10⁻⁹ and 4.8 × 10⁻⁸ M, respectively. The peptide was also found to be effective in vivo as derived from histopathological observations in a Staphylococcal skin infection rat model with MRSA as causative organism.