An improved method to assess torsional properties of rodent long bones

Torsion is an important testing modality commonly used to calculate structural properties of long bones. However, the effects of size and geometry must be excluded from the overall structural response in order to compare material properties of bones of different size, age and species. We have developed a new method to analyze torsional properties of bones using actual cross-sectional information and length-wise geometrical variations obtained by micro-computed topographic (μCT) imaging. The proposed method was first validated by manufacturing three rat femurs through rapid prototyping using a plastic with known material properties. The observed variations in calculated torsional shear modulus of the hollow elliptical model of mid-shaft cross-section (Ekeland et al.), multi-prismatic model of five true cross-sections (Levenston et al.) and multi-slice model presented in this study were 96%, ?7% and 6% from the actual properties of the plastic, respectively. Subsequently, we used this method to derive relationships expressing torsional properties of rat cortical bone as a function of μCT-based bone volume fraction or apparent density over a range of normal and pathologic bone densities. Results indicate that a regression model of shear modulus or shear strength and bone volume fraction or apparent density described at least 81% of the variation in torsional properties of normal and pathologic bones. Coupled with the structural rigidity analysis technique introduced by the authors, the relationships reported here can provide a non-invasive tool to assess fracture risk in bones affected by pathologies and/or treatment options.     

Computational modeling of the mechanical behavior of the cerebrospinal fluid system

A computational fluid dynamics (CFD) model of the cerebrospinal fluid system was constructed based on a simplified geometry of the brain ventricles and their connecting pathways. The flow is driven by a prescribed sinusoidal motion of the third ventricle lateral walls, with all other boundaries being rigid. The pressure propagation between the third and lateral ventricles was examined and compared to data obtained from a similar geometry with a stenosed aqueduct. It could be shown that the pressure amplitude in the lateral ventricles increases in the presence of aqueduct stenosis. No difference in phase shift between the motion of the third ventricle walls and the pressure in the lateral ventricles because of the aqueduct stenosis could be observed. It is deduced that CFD can be used to analyze the pressure propagation and its phase shift relative to the ventricle wall motion. It is further deduced that only models that take into account the coupling between ventricles, which feature a representation of the original geometry that is as accurate as possible and which represent the ventricle boundary motion realistically, should be used to make quantitative statements on flow and pressure in the ventricular space.     

Combination Chemotherapy in Generalized Hodgkin's Disease

Fifty-two patients with generalized Hodgkin''s disease were treated with a combination of mustine hydrochloride, vinblastine, procarbazine, and prednisolone. Complete remissions were obtained initially in six out of seven patients (86%) who had previously received no treatment, in 15 out of 19 (79%) who had had only radiotherapy in the past, and in 9 out of 26 (35%) who had previously been given chemotherapy with or without radiotherapy. Of these 30 patients in whom a complete remission was obtained 22 have been free of any symptoms or signs of disease for periods ranging from 4 to 22 months. The response to treatment was rapid, and toxicity was not a major problem, except in those who had previously been treated with cytotoxic drugs used continuously and not in courses. A comparative trial of radiotherapy and combination therapy in the treatment of Stage III Hodgkin''s disease is strongly recommended.     

Combination Chemotherapy using L-Asparaginase,Daunorubicin, and Cytosine Arabinoside in Adults with Acute Myelogenous Leukaemia

Cytosine arabinoside and daunorubicin used in an intensive intermittent regimen have been shown to be an effective combination for the induction of complete remissions in 14 out of 23 adult patients with acute myelogenous leukaemia. This gives an overall complete remission rate of 60%. A further patient had a good partial remission. The addition of L-asparaginase to the regimen has not increased the incidence of remission and there were more side effects in the L-asparaginasetreated group. Of the 10 patients treated with L-asparaginase in addition to cytosine arabinoside and daunorubicin, five achieved a complete remission. Of the 13 patients treated with cytosine arabinoside and daunorubicin without L-asparaginase, nine achieved a complete remission and one a good partial remission.     

The breakup of intravascular microbubbles and its impact on the endothelium

Encapsulated microbubbles (MBs) serve as endovascular agents in a wide range of medical ultrasound applications. The oscillatory response of these agents to ultrasonic excitation is determined by MB size, gas content, viscoelastic shell properties and geometrical constraints. The viscoelastic parameters of the MB capsule vary during an oscillation cycle and change irreversibly upon shell rupture. The latter results in marked stress changes on the endothelium of capillary blood vessels due to altered MB dynamics. Mechanical effects on microvessels are crucial for safety and efficacy in applications such as focused ultrasound-mediated blood–brain barrier (BBB) opening. Since direct in vivo quantification of vascular stresses is currently not achievable, computational modelling has established itself as an alternative. We have developed a novel computational framework combining fluid–structure coupling and interface tracking to model the nonlinear dynamics of an encapsulated MB in constrained environments. This framework is used to investigate the mechanical stresses at the endothelium resulting from MB shell rupture in three microvessel setups of increasing levels of geometric detail. All configurations predict substantial elevation of up to 150 % for peak wall shear stress upon MB breakup, whereas global peak transmural pressure levels remain unaltered. The presence of red blood cells causes confinement of pressure and shear gradients to the proximity of the MB, and the introduction of endothelial texture creates local modulations of shear stress levels. With regard to safety assessments, the mechanical impact of MB breakup is shown to be more important than taking into account individual red blood cells and endothelial texture. The latter two may prove to be relevant to the actual, complex process of BBB opening induced by MB oscillations.     

Wall stress of the cervical carotid artery in patients with carotid dissection: a case-control study

Spontaneous internal carotid artery (ICA) dissection (sICAD) results from an intimal tear located around the distal carotid sinus. The mechanisms causing the tear are unknown. This case-control study tested the hypotheses that head movements increase the wall stress in the cervical ICA and that the stress increase is greater in patients with sICAD than in controls. Five patients with unilateral, recanalized, left sICAD and five matched controls were investigated before and after maximal head rotation to the left and neck hyperextension after 45° head rotation to the left. The anatomy of the extracranial carotid arteries was assessed by magnetic resonance imaging and used to create finite element models of the right ICA. Wall stress increased after head movements. Increases above the 80th and 90th percentile were located at the intimal side of the artery wall from 7.4 mm below to 10 mm above the cranial edge of the carotid sinus, i.e., at the same location as histologically confirmed tears in patients with sICAD. Wall stress increase did not differ between patients and controls. The present findings suggest that wall stress increases at the intimal side of the artery wall surrounding the distal edge of the carotid bulb after head movements may be important for the development of carotid dissection. The lack of wall stress difference between the two groups indicates that the carotid arteries of patients with carotid dissection have either distinct functional or anatomical properties or endured unusually heavy wall stresses to initiate dissection.     

Compressive axial mechanical properties of rat bone as functions of bone volume fraction,apparent density and micro-ct based mineral density

Mechanical testing has been regarded as the gold standard to investigate the effects of pathologies on the structure–function properties of the skeleton. With recent advances in computing power of personal computers, virtual alternatives to mechanical testing are gaining acceptance and use. We have previously introduced such a technique called structural rigidity analysis to assess mechanical strength of skeletal tissue with defects. The application of this technique is predicated upon the use of relationships defining the strength of bone as a function of its density for a given loading mode. We are to apply this technique in rat models to assess their compressive skeletal response subjected to a host of biological and pharmaceutical stimulations. Therefore, the aim of this study is to derive a relationship expressing axial compressive mechanical properties of rat cortical and cancellous bone as a function of equivalent bone mineral density, bone volume fraction or apparent density over a range of normal and pathologic bones.We used bones from normal, ovariectomized and partially nephrectomized animals. All specimens underwent micro-computed tomographic imaging to assess bone morphometric and densitometric indices and uniaxial compression to failure.We obtained univariate relationships describing 71–78% of the mechanical properties of rat cortical and cancellous bone based on equivalent mineral density, bone volume fraction or apparent density over a wide range of density and common skeletal pathologies. The relationships reported in this study can be used in the structural rigidity analysis introduced by the authors to provide a non-invasive method to assess the compressive strength of bones affected by pathology and/or treatment options.     

Frequency of KCNC3 DNA variants as causes of spinocerebellar ataxia 13 (SCA13)

Background

Gain-of function or dominant-negative mutations in the voltage-gated potassium channel KCNC3 (Kv3.3) were recently identified as a cause of autosomal dominant spinocerebellar ataxia. Our objective was to describe the frequency of mutations associated with KCNC3 in a large cohort of index patients with sporadic or familial ataxia presenting to three US ataxia clinics at academic medical centers.

Methodology

DNA sequence analysis of the coding region of the KCNC3 gene was performed in 327 index cases with ataxia. Analysis of channel function was performed by expression of DNA variants in Xenopus oocytes.

Principal Findings

Sequence analysis revealed two non-synonymous substitutions in exon 2 and five intronic changes, which were not predicted to alter splicing. We identified another pedigree with the p.Arg423His mutation in the highly conserved S4 domain of this channel. This family had an early-onset of disease and associated seizures in one individual. The second coding change, p.Gly263Asp, subtly altered biophysical properties of the channel, but was unlikely to be disease-associated as it occurred in an individual with an expansion of the CAG repeat in the CACNA1A calcium channel.

Conclusions

Mutations in KCNC3 are a rare cause of spinocerebellar ataxia with a frequency of less than 1%. The p.Arg423His mutation is recurrent in different populations and associated with early onset. In contrast to previous p.Arg423His mutation carriers, we now observed seizures and mild mental retardation in one individual. This study confirms the wide phenotypic spectrum in SCA13.