Localized delivery of epidermal growth factor improves the survival of transplanted hepatocytes

Hepatocyte transplantation may provide a new approach for treating a variety of liver diseases if a sufficient number of the transplanted cells survive over an extended time period. In this report, we describe a technique to deliver growth factors to transplanted hepatocytes to improve their engraftment. Epidermal growth factor (EGF) was incorporated (0.11%) into microspheres (19 +/- 12 mum) fabricated from a copolymer of lactic and glycolic acid using a double emulsion technique. The incorporated EGF was steadily released over 1 month in vitro, and it remained biologically active, as determined by its ability to stimulate DNA synthesis, cell division, and long-term survival of cultured hepatocytes. EGF-containing microspheres were mixed with a suspension of hepatocytes, seeded onto porous sponges, and implanted into the mesentery of two groups of Lewis rats. The first group of animals had their portal vein shunted to the inferior vena cava prior to cell transplantation (portal-caval shunt = PCS), and the second group of animals did not (non-PCS). This surgical procedure improves the survival of transplanted hepatocytes. The engraftment of transplanted hepatocytes in PCS animals was increased two-fold by adding EGF microspheres, as compared to adding control microspheres that contained no growth factors. Devices implanted into non-PCS animals had fewer engrafted hepatocytes than devices implanted into PCS animals, regardless of whether blank or EGF-containing microspheres were added. These results first indicate that it is possible to design systems which can alter the microenvironment of transplanted hepatocytes to improve their engraftment. They also suggest that hepatocyte engraftment is not improved by providing single growth factors unless the correct environment (PCS) is provided for the transplanted cells. (c) 1996 John Wiley & Sons, Inc.     

Extracellular matrix controls tubulin monomer levels in hepatocytes by regulating protein turnover.

Cells have evolved an autoregulatory mechanism to dampen variations in the concentration of tubulin monomer that is available to polymerize into microtubules (MTs), a process that is known as tubulin autoregulation. However, thermodynamic analysis of MT polymerization predicts that the concentration of free tubulin monomer must vary if MTs are to remain stable under different mechanical loads that result from changes in cell adhesion to the extracellular matrix (ECM). To determine how these seemingly contradictory regulatory mechanisms coexist in cells, we measured changes in the masses of tubulin monomer and polymer that resulted from altering cell-ECM contacts. Primary rat hepatocytes were cultured in chemically defined medium on bacteriological petri dishes that were precoated with different densities of laminin (LM). Increasing the LM density from low to high (1-1000 ng/cm2), promoted cell spreading (average projected cell area increased from 1200 to 6000 microns2) and resulted in formation of a greatly extended MT network. Nevertheless, the steady-state mass of tubulin polymer was similar at 48 h, regardless of cell shape or ECM density. In contrast, round hepatocytes on low LM contained a threefold higher mass of tubulin monomer when compared with spread cells on high LM. Furthermore, similar results were obtained whether LM, fibronectin, or type I collagen were used for cell attachment. Tubulin autoregulation appeared to function normally in these cells because tubulin mRNA levels and protein synthetic rates were greatly depressed in round cells that contained the highest level of free tubulin monomer. However, the rate of tubulin protein degradation slowed, causing the tubulin half-life to increase from approximately 24 to 55 h as the LM density was lowered from high to low and cell rounding was promoted. These results indicate that the set-point for the tubulin monomer mass in hepatocytes can be regulated by altering the density of ECM contacts and changing cell shape. This finding is consistent with a mechanism of MT regulation in which the ECM stabilizes MTs by both accepting transfer of mechanical loads and altering tubulin degradation in cells that continue to autoregulate tubulin synthesis.     

Hepatocyte culture on biodegradable polymeric substrates

The interactions of primary rat liver cells with biodegradable polymeric substrates were investigated in vitro to assess the suitability of the polymer materials for use in cell transplantation devices. The kinetics of cell adhesion to, and the growth and biochemical function of cells maintained on, films formed from poly (D,L-lactic-co-glycolic acid, 88: 12) (PLGA) or from a 50/50 (w/w) blend of PLGA and poly (L-lactic acid) (PLLA) were evaluated in comparison to two control substrates, matrigel coated or collagen-coated polystyrene petri dishes. The rate of cell adhesion to both types of polymeric substrates was similar to the rate of adhesion to the collagen control substrate, but of the two polymers, only the blend was suitable for extended culture. Hepatocytes maintained on the polymer blend films showed retention of differentiated cell function as measured by the rate of albumin secretion-the rate of albumin secretion by cells on the films was the same as the rate for cells on matrigel and reached a level in the range of reported in vivo levels (140-160 mug/10(6) cells/24 h). In contrast, albumin secretion by hepatocytes maintained on collagen-coated polystyrene culture dishes declined over five days to a level one third that of the initial level and one fifth that of cells maintained on the polymer blend films on day five. Such retention of differentiated cell function by hepatocytes in culture has previously been observed only when hepatocytes were cultured in the presence of exogenous extracellular matrix proteins or were cocultured with another cell type. In addition to retention of differentiated function, the cells maintained on the polymer blend films also displayed rates of DNA synthesis similar to controls maintained on collagen-coated polystyrene, a substrate optimal for DNA synthesis.     

Integrin binding and cell spreading on extracellular matrix act at different points in the cell cycle to promote hepatocyte growth.

This study was undertaken to determine the importance of integrin binding and cell shape changes in the control of cell-cycle progression by extracellular matrix (ECM). Primary rat hepatocytes were cultured on ECM-coated dishes in serum-free medium with saturating amounts of growth factors (epidermal growth factor and insulin). Integrin binding and cell spreading were promoted in parallel by plating cells on dishes coated with fibronectin (FN). Integrin binding was separated from cell shape changes by culturing cells on dishes coated with a synthetic arg-gly-asp (RGD)-peptide that acts as an integrin ligand but does not support hepatocyte extension. Expression of early (junB) and late (ras) growth response genes and DNA synthesis were measured to determine whether these substrata induce G0-synchronized hepatocytes to reenter the growth cycle. Cells plated on FN exhibited transient increases in junB and ras gene expression (within 2 and 8 h after plating, respectively) and synchronous entry into S phase. Induction of junB and ras was observed over a similar time course in cells on RGD-coated dishes, however, these round cells did not enter S phase. The possibility that round cells on RGD were blocked in mid to late G1 was confirmed by the finding that when trypsinized and replated onto FN-coated dishes after 30 h of culture, they required a similar time (12-15 h) to reenter S phase as cells that had been spread and allowed to progress through G1 on FN. We have previously shown that hepatocytes remain viable and maintain high levels of liver-specific functions when cultured on these RGD-coated dishes. Thus, these results suggest that ECM acts at two different points in the cell cycle to regulate hepatocyte growth: first, by activating the G0/G1 transition via integrin binding and second, by promoting the G1/S phase transition and switching off the default differentiation program through mechanisms related to cell spreading.     

Phylogenetic diversification of immunoglobulin genes and the antibody repertoire

Immunoglobulins are encoded by a large multigene system that undergoes somatic rearrangement and additional genetic change during the development of immunoglobulin-producing cells. Inducible antibody and antibody-like responses are found in all vertebrates. However, immunoglobulin possessing disulfide-bonded heavy and light chains and domain-type organization has been described only in representatives of the jawed vertebrates. High degrees of nucleotide and predicted amino acid sequence identity are evident when the segmental elements that constitute the immunoglobulin gene loci in phylogenetically divergent vertebrates are compared. However, the organization of gene loci and the manner in which the independent elements recombine (and diversify) vary markedly among different taxa. One striking pattern of gene organization is the "cluster type" that appears to be restricted to the chondrichthyes (cartilaginous fishes) and limits segmental rearrangement to closely linked elements. This type of gene organization is associated with both heavy- and light-chain gene loci. In some cases, the clusters are "joined" or "partially joined" in the germ line, in effect predetermining or partially predetermining, respectively, the encoded specificities (the assumption being that these are expressed) of the individual loci. By relating the sequences of transcribed gene products to their respective germ-line genes, it is evident that, in some cases, joined-type genes are expressed. This raises a question about the existence and/or nature of allelic exclusion in these species. The extensive variation in gene organization found throughout the vertebrate species may relate directly to the role of intersegmental (V<==>D<==>J) distances in the commitment of the individual antibody-producing cell to a particular genetic specificity. Thus, the evolution of this locus, perhaps more so than that of others, may reflect the interrelationships between genetic organization and function.      

An interlaboratory comparison of physiological and genetic properties of four Saccharomyces cerevisiae strains

To select a Saccharomyces cerevisiae reference strain amenable to experimental techniques used in (molecular) genetic, physiological and biochemical engineering research, a variety of properties were studied in four diploid, prototrophic laboratory strains. The following parameters were investigated: 1) maximum specific growth rate in shake-flask cultures; 2) biomass yields on glucose during growth on defined media in batch cultures and steady-state chemostat cultures under controlled conditions with respect to pH and dissolved oxygen concentration; 3) the critical specific growth rate above which aerobic fermentation becomes apparent in glucose-limited accelerostat cultures; 4) sporulation and mating efficiency; and 5) transformation efficiency via the lithium-acetate, bicine, and electroporation methods. On the basis of physiological as well as genetic properties, strains from the CEN.PK family were selected as a platform for cell-factory research on the stoichiometry and kinetics of growth and product formation.     

Isolation and characterization of novel bacterial strains exhibiting ligninolytic potential

Background

The number of biotransformations that use nicotinamide recycling systems is exponentially growing. For this reason one of the current challenges in biocatalysis is to develop and optimize more simple and efficient cofactor recycling systems. One promising approach to regenerate NAD⁺ pools is the use of NADH-oxidases that reduce oxygen to hydrogen peroxide while oxidizing NADH to NAD⁺. This class of enzymes may be applied to asymmetric reduction of prochiral substrates in order to obtain enantiopure compounds.

Results

The NADH-oxidase (NOX) presented here is a flavoenzyme which needs exogenous FAD or FMN to reach its maximum velocity. Interestingly, this enzyme is 6-fold hyperactivated by incubation at high temperatures (80°C) under limiting concentrations of flavin cofactor, a change that remains stable even at low temperatures (37°C). The hyperactivated form presented a high specific activity (37.5 U/mg) at low temperatures despite isolation from a thermophile source. Immobilization of NOX onto agarose activated with glyoxyl groups yielded the most stable enzyme preparation (6-fold more stable than the hyperactivated soluble enzyme). The immobilized derivative was able to be reactivated under physiological conditions after inactivation by high solvent concentrations. The inactivation/reactivation cycle could be repeated at least three times, recovering full NOX activity in all cases after the reactivation step. This immobilized catalyst is presented as a recycling partner for a thermophile alcohol dehydrogenase in order to perform the kinetic resolution secondary alcohols.

Conclusion

We have designed, developed and characterized a heterogeneous and robust biocatalyst which has been used as recycling partner in the kinetic resolution of rac-1-phenylethanol. The high stability along with its capability to be reactivated makes this biocatalyst highly re-useable for cofactor recycling in redox biotransformations.