Development and Evaluation of New Microemulsion-Based Hydrogel Formulations for Topical Delivery of Fluconazole

The aim of the present investigation was to develop and evaluate microemulsion-loaded hydrogels (MEHs) for the topical delivery of fluconazole (FZ). The solubility of FZ in oils, surfactants and cosurfactants was evaluated to identify the components of the microemulsion. The pseudo-ternary phase diagrams were constructed using the novel phase diagram by micro-plate dilution method. Carbopol EDT 2020 was used to convert FZ-loaded microemulsions into gel form without affecting their structure. The selected microemulsions were assessed for globule size, zeta potential and polidispersity index. Besides this, the microemulsion-loaded hydrogel (MEH) formulations were evaluated for drug content, pH, rheological properties and in vitro drug release through synthetic membrane and excised pig ear skin in comparison with a conventional hydrogel. The optimised MEH FZ formulations consisting of FZ 2%, Transcutol P 11.5% and 11%, respectively, as oil phase, Lansurf SML 20-propyleneglycol 52% and 50%, respectively, as surfactant–cosurfactant (2:1), Carbopol EDT 2020 1.5% as gelling agent and water 34.5% and 37%, respectively, showed highest flux values and high release rate values, and furthermore, they had low surfactant content. The in vitro FZ permeation through synthetic membrane and excised pig ear skin from the studied MEHs was best described by the zero-order and first-order models. Finally, the optimised MEH FZ formulations showed similar or slightly higher antifungal activity as compared to that of conventional hydrogel and Nizoral® cream, respectively. The results suggest the potential use of developed MEHs as vehicles for topical delivery of FZ, encouraging further in vitro and in vivo evaluation.KEY WORDS: fluconazole, in vitro skin permeation, microemulsion, microemulsion-loaded hydrogel, topical     

Paraoxonase and arylesterase activities in fibromyalgia

We aimed to evaluate the association of serum paraoxonase and arylesterase activities and oxidative/antioxidative status in patients with fibromyalgia. Forty-two patients with fibromyalgia and 53 healthy controls were included in the study. Serum paraoxonase and arylesterase activities were measured spectrophotometrically. Oxidative and antioxidative status were evaluated by measuring serum lipid hydroperoxide (LOOH) levels, total antioxidant status (TAS) and free sulfhydryl groups (-SH = total thiol). Lipid parameters were determined by routine laboratory methods. Serum paraoxonase and arylesterase activities, and TAS were lower in patients with fibromyalgia than in controls (P < 0.001, for all), and the -SH level was also lower in the patient group (P = 0.03). LOOH levels were higher in the patient group than in controls (P = 0.01). Our results suggest that patients with fibromyalgia were exposed to oxidative stress, and paraoxonase and arylesterase activities were decreased in these patients. Patients with fibromyalgia might be prone to development of atherosclerosis with reduced paraoxonase and arylesterase activities.     

Imaging proteins inside cells with fluorescent tags

Watching biological molecules provides clues to their function and regulation. Some of the most powerful methods of labeling proteins for imaging use genetically encoded fluorescent fusion tags. There are four standard genetic methods of covalently tagging a protein with a fluorescent probe for cellular imaging. These use (i) autofluorescent proteins, (ii) self-labeling enzymes, (iii) enzymes that catalyze the attachment of a probe to a target sequence, and (iv) biarsenical dyes that target tetracysteine motifs. Each of these techniques has advantages and disadvantages. In this review, we cover new developments in these methods and discuss practical considerations for their use in imaging proteins inside living cells.     

Über die Wirkung von ADP und einigen Kationen auf die Rotationsströmung in den Wurzelhaaren der Gerste (Hordeum vulgare L.)

Zusammenfassung In getrennten Versuchen wurde die Wirkung von ADP, Ca⁺⁺, Mg⁺⁺, K⁺ und Cu⁺⁺ auf die Rotationsströmung in den Wurzelhaaren der Gerste (Hordetim vulgare L.) untersucht. Das in verschiedenen Konzentrationen fortdauernd verabreichte ADP bedingte eine Stimulation der Plasmaströmung. Die Beschleunigung der Rotationsströmung war der ADP-Konzentration gegenüber umgekehrt proportional (Abb. 3).Von den untersuchten Kationen hatte nur Ca⁺⁺ (1·10^–3 Mol) eine Stimulationswirkung. Diese Stimulationswirkung wird der Aktivierung eines Enzyms bzw. eines kontraktilen Proteins mit ATPase-Eigenschaften zugeschrieben.Die Rolle von ADP und einigen Kationen bei der Stimulation der Rotation wurde dann mit Hilfe einer gemischten Behandlung untersucht. Diese bestand in der gleichzeitigen Verabreichung von ADP (1·10^–6 Mol) und CaCl₂, MgCl₂, KCl (1 · 10^–3 Mol) oder CuCl₂ (1·10^–6 Mol). Es wurde festgestellt, daß Mg⁺⁺ und Ca⁺⁺ eine antagonistische Wirkung ausüben. Ca⁺⁺ hebt die durch ADP induzierte Stimulation auf und reduziert die Rotationsgeschwindigkeit plötzlich bis auf den Kontrollwert. Die Mg⁺⁺-Wirkung bewirkt, nach einer zeitweiligen Beibehaltung der Stimulation, ebenfalls eine Abnahme der Geschwindigkeit. K⁺ hat eine ähnliche Wirkung wie Ca⁺⁺. Cu⁺⁺ beeinträchtigt die ADP-induzierte Stimulation in geringem Maße.Die gleichzeitige Einwirkung von ADP und einigen Kationen erlaubt die Aufstellung folgender Hypothese. Die Rotationsstimulation erfolgt dank dem ATP, das auf Kosten des von außen absorbierten ADP in den Mitochondrien synthetisiert wird. Die zusätzliche ATP-Synthese kann durch gleichzeitige Ca⁺⁺-Behandlung unterbunden werden. NachHanson und Mitarb, sollen Ca⁺⁺ und ADP um ein phosphoryliertes Zwischenprodukt in Kompetition treten, so daß es zu einer Ansammlung von Ca⁺⁺ und P_a in der Zelle kommt. Andererseits könnte teilweise auch die aktive, energieverbrauchende Salzabsorption die Geschwindigkeitsabnahme der Rotation bei gemischter Behandlung erklären.

---

The effect of ADP and some cations on rotational streaming in barley (Hordeum vulgare L.) root hairs

Summary The effect of ADP, Ca⁺⁺, Mg⁺⁺, K⁺, and Cu⁺⁺ upon rotational streaming within barley (Hordeum vulgäre L.) root hairs was separately studied. It was shown that various solutions of ADP may stimulate the streaming after continuous treatment. The rate increase of the rotational streaming was inverse proportional to ADP concentration (Fig. 3).From the investigated cations only Ca⁺⁺ (1·10^–3M) caused a stimulation of streaming after continuous treatment. This effect is probably due to enzymic activation of a contractile proteine which has ATPase feature.The role of ADP and of the investigated cations in the stimulation of the rotational streaming was studied by means of mixed treatment. This kind of treatment consists in a simultaneous administration of ADP (1 · 10^–6M) and CaCl₂, MgCl₂, KCl (1 · 10^–3M), or CuCl₂ (1 · 10^–6M) solutions. Ca⁺⁺ and Mg⁺⁺ showed an antagonistic action. Ca⁺⁺ brings about an immediately suppress of ADP induced stimulation. Suddenly the rate of streaming comes back to control. Mg⁺⁺ after a temporary maintaining of stimulation, also causes the lowering of the streaming. The action of K⁺ was very similar to those of Ca⁺⁺. Cu⁺⁺ changes to a little extent the stimulation caused by ADP.The simultaneous action of ADP and of the investigated cations allow us to express the following hypothesis. The stimulation of the rotational streaming after ADP treatment probably is due to ATP synthetized in mitochondria on the account of ADP. The additional synthesis of ATP can be prevented by simultaneous administration of Ca⁺⁺. According toHanson and his coworkers Ca⁺⁺ would compete with ADP for a phosphorylated intermediate product. From a such competition would result the Ca⁺⁺ and P_i accumulation. The active uptake of salts which require energy would also explain the lowering of the rotational streaming rate after the mixed treatment.

     

Initiation of ribosome degradation during starvation in Escherichia coli

Ribosomes are known to be degraded under conditions of nutrient limitation. However, the mechanism by which a normally stable ribosome becomes a substrate for the degradation machinery has remained elusive. Here, we present in vitro and in vivo data demonstrating that free ribosome subunits are the actual targets of the degradative enzymes, whereas 70S particles are protected from such degradation. Conditions that increase the formation of subunits both in vitro and in vivo lead to enhanced degradation, while conditions favoring the presence of intact 70S ribosomes prevent or reduce breakdown. Thus, the simple formation of free 50S and 30S subunits is sufficient to serve as the initiation mechanism that allows endoribonuclease cleavage and subsequent ribosome breakdown.     

Numerical simulation of the insertion process of an uncemented hip prosthesis in order to evaluate the influence of residual stress and contact distribution on the stem initial stability

The long-term success of a cementless total hip arthroplasty depends on the implant geometry and interface bonding characteristics (fit, coating and ingrowth) and on stem stiffness. This study evaluates the influence of stem geometry and fitting conditions on the evolution and distribution of the bone–stem contact, stress and strain during and after the hip stem insertion, by means of dynamic finite element techniques. Next, the influence of the mechanical state (bone–stem contact, stress and strain) resulted from the insertion process on the stem initial resistance to subsidence is investigated. In addition, a study on the influence of bone–stem interface conditions (friction) on the insertion process and on the initial stem stability under physiological loading is performed. The results indicate that for a stem with tapered shape the contact in the proximal part of the stem was improved, but contact in the calcar region was achieved only when extra press-fit conditions were considered. Changes in stem geometry towards a more tapered shape and extra press fit and variation in the bone–stem interface conditions (contact amount and high friction) led to a raise in the total insertion force. A direct positive relationship was found between the stem resistance to subsidence and stem geometry (tapering and press fit), bone–stem interface conditions (bone–stem contact and friction interface) and the mechanical status at the end of the insertion (residual stress and strain). Therefore, further studies on evaluating the initial performance of different stem types should consider the parameters describing the bone–stem interface conditions and the mechanical state resulted from the insertion process.     

Glycation as an atherogenic modification of LDL

PURPOSE OF REVIEW: To highlight the potential importance of glycation as an atherogenic modification of LDL in both diabetic and nondiabetic people. RECENT FINDINGS: Small dense LDL which is known to be most closely associated with atherogenesis is more susceptible to glycation than more buoyant LDL. Glycation and oxidation of LDL appear to be intimately associated. SUMMARY: Glycation of LDL occurs chiefly due to the nonenzymatic reaction of glucose and its metabolites with the free amino groups of lysine in which LDL is rich. Higher concentrations of glycated LDL are present in diabetic than in nondiabetic individuals, but even in the latter, there is generally more circulating glycated LDL than oxidatively modified LDL. Probably, oxidation and glycation of LDL are at least partially interdependent, but both prevent LDL receptor-mediated uptake and promote macrophage scavenger receptor uptake. The recognition that LDL glycation is at least as important as oxidation in atherogenesis may lead to improvements in our understanding of its mechanism and how to prevent it.