Intergenerational effects of inbreeding in Nicrophorus vespilloides: offspring suffer fitness costs when either they or their parents are inbred

Inbreeding depression is the reduction in fitness caused by mating between related individuals. Inbreeding is expected to cause a reduction in offspring fitness when the offspring themselves are inbred, but outbred individuals may also suffer a reduction in fitness when they depend on care from inbred parents. At present, little is known about the significance of such intergenerational effects of inbreeding. Here, we report two experiments on the burying beetle Nicrophorus vespilloides, an insect with elaborate parental care, in which we investigated inbreeding depression in offspring when either the offspring themselves or their parents were inbred. We found substantial inbreeding depression when offspring were inbred, including reductions in hatching success of inbred eggs and survival of inbred offspring. We also found substantial inbreeding depression when parents were inbred, including reductions in hatching success of eggs produced by inbred parents and survival of outbred offspring that received care from inbred parents. Our results suggest that intergenerational effects of inbreeding can have substantial fitness costs to offspring, and that future studies need to incorporate such costs to obtain accurate estimates of inbreeding depression.     

Interaction between parental care and sibling competition: parents enhance offspring growth and exacerbate sibling competition

Species with elaborate parental care often also show intense sibling competition over resources provided by parents, suggesting joint evolution of these two traits. Despite this, the evolution of elaborate parental care and the evolution of intense sibling competition are often studied separately. Here, we examine the interaction between parental food provisioning and sibling competition for resources through the joint manipulation of the presence or absence of parents and brood size in a species with facultative parental care: the burying beetle Nicrophorus vespilloides. The effect of the interaction between the presence or absence of parents and brood size was strong; brood size had a strong effect on growth when parents provided care, but no effect when parents were absent. As in previous studies, offspring grew faster when parents were present than when parents were absent, and offspring grew faster in smaller broods than in larger broods. Our behavioral observations showed that brood size had a negative effect on both the amount of time parents spent providing resources to individual offspring and the offspring's effectiveness of begging, confirming that the level of sibling competition increased with brood size. Furthermore, offspring in larger broods shifted more from begging toward self-feeding as they grew older compared to offspring in small broods. Our study provides novel insights into the joint evolution of parental care and sibling competition, and the evolution of offspring begging signals. We discuss the implications of our results in light of recent theoretical work on the evolution of parental care, sibling competition, and offspring begging signals.     

Regional myocardial work by strain Doppler echocardiography and LV pressure: a new method for quantifying myocardial function

There is a need for better methods to quantify regional myocardial function. In the present study, we investigated the feasibility of quantifying regional function in terms of a segmental myocardial work index as derived from strain Doppler echocardiography (SDE) and invasive pressure. In 10 anesthetized dogs, we measured left ventricular (LV) pressure by micromanometer and myocardial longitudinal strains by SDE and sonomicrometry. The regional myocardial work index (RMWI) was calculated as the area of the pressure-strain loop. As a reference method for strain, we used sonomicrometry. By convention, the loop area was assigned a positive sign when the pressure-strain coordinates rotated counterclockwise. Measurements were done at baseline and during volume loading and left anterior descending coronary artery (LAD) occlusion, respectively. There was a good correlation between RMWI calculated from strain by SDE and strain by sonomicrometry (y = 0.73x + 0.21, r = 0.82, P < 0.01). Volume loading caused an increase in RMWI from 1.3 +/- 0.2 to 2.2 +/- 0.1 kJ/m3 (P < 0.05) by SDE and from 1.5 +/- 0.3 to 2.7 +/- 0.3 kJ/m3 (P = 0.066) by sonomicrometry. Short-term ischemia (1 min) caused a decrease in RMWI from 1.3 +/- 0.2 to 0.3 +/- 0.04 kJ/m3 (P < 0.05) and from 1.3 +/- 0.3 to 0.5 +/- 0.2 kJ/m3 (P < 0.05) by SDE and sonomicrometry, respectively. In the nonischemic ventricle and during short-term ischemia, the pressure-strain loops rotated counterclockwise, consistent with actively contracting segments. Long-term ischemia (3 h), however, caused the pressure-strain loop to rotate clockwise, consistent with entirely passive segments, and the loop areas became negative, -0.2 +/- 0.1 and -0.1 +/- 0.03 kJ/m3 (P < 0.05) by SDE and sonomicrometry, respectively. A RMWI can be estimated by SDE in combination with LV pressure. Furthermore, the orientation of the loop can be used to assess whether the segment is active or passive.     

Deceleration time of systolic pulmonary venous flow: a new clinical marker of left atrial pressure and compliance.

The curvilinearity of the atrial pressure-volume curve implies that atrial compliance decreases progressively with increasing left atrial (LA) pressure (LAP). We predicted that reduced LA compliance leads to more rapid deceleration of systolic pulmonary venous (PV) flow. With this rationale, we investigated whether the deceleration time (t dec) of PV systolic flow velocity reflects mean LAP. In eight patients during coronary surgery, before extracorporeal circulation, PV flow by ultrasonic transit time and invasive LAP were recorded during stepwise volume loading. The t dec was calculated using two methods: by drawing a tangent through peak deceleration and by drawing a line from peak systolic flow through the nadir between the systolic and early diastolic flow waves. LA compliance was calculated as the systolic PV flow integral divided by LAP increment. Volume loading increased mean LAP from 11 +/- 3 to 20 +/- 5 mmHg (P < 0.001) (n = 40), reduced LA compliance from 1.16 +/- 0.42 to 0.72 +/- 0.40 ml/mmHg (P < 0.004) (n = 40), and reduced t dec from 320 +/- 50 to 170 +/- 40 ms (P < 0.0005) (n = 40). Mean LAP correlated well with t dec (r = 0.84, P < 0.0005) (n = 40) and LA compliance (r = 0.79, P < 0.0005) (n = 40). Elevated LAP caused a decrease in LA compliance and therefore more rapid deceleration of systolic PV flow. The t dec has potential to become a semiquantitative marker of LAP and an index of LA passive elastic properties.     

Accounting for female space sharing in St. Kilda Soay sheep (Ovis aries) results in little change in heritability estimates

When estimating heritability in free‐living populations, it is common practice to account for common environment effects, because of their potential to generate phenotypic covariance among relatives thereby biasing heritability estimates. In quantitative genetic studies of natural populations, however, philopatry, which results in relatives being clustered in space, is rarely accounted for. The two studies that have been carried out so far suggest absolute declines in heritability estimates of up to 43% when accounting for space sharing by relatives. However, due to methodological limitations these estimates may not be representative. We used data from the St. Kilda Soay sheep population to estimate heritabilities with and without accounting for space sharing for five traits for which there is evidence for additive genetic variance (birthweight, birth date, lamb August weight, and female post‐mortem jaw and metacarpal length). We accounted for space sharing by related females by separately incorporating spatial autocorrelation, and a home range similarity matrix. Although these terms accounted for up to 18% of the variance in these traits, heritability estimates were only reduced by up to 7%. Our results suggest that the bias caused by not accounting for space sharing may be lower than previously thought. This suggests that philopatry does not inevitably lead to a large bias if space sharing by relatives is not accounted for. We hope our work stimulates researchers to model shared space when relatives in their study population share space, as doing so will enable us to better understand when bias may be of particular concern.     

Asynchronous hatching provides females with a means for increasing male care but incurs a cost by reducing offspring fitness

In species with biparental care, sexual conflict occurs because the benefit of care depends on the total amount of care provided by the two parents while the cost of care depends on each parent's own contribution. Asynchronous hatching may play a role in mediating the resolution of this conflict over parental care. The sexual conflict hypothesis for the evolution of asynchronous hatching suggests that females adjust hatching patterns in order to increase male parental effort relative to female effort. We tested this hypothesis in the burying beetle Nicrophorus vespilloides by setting up experimental broods with three different hatching patterns: synchronous, asynchronous and highly asynchronous broods. As predicted, we found that males provided care for longer in asynchronous broods whereas the opposite was true of females. However, we did not find any benefit to females of reducing their duration of care in terms of increased lifespan or reduced mass loss during breeding. We found substantial negative effects of hatching asynchrony on offspring fitness as larval mass was lower and fewer larvae survived to dispersal in highly asynchronous broods compared to synchronous or asynchronous broods. Our results suggest that, even though females can increase male parental effort by hatching their broods more asynchronously, females pay a substantial cost from doing so in terms of reducing offspring growth and survival. Thus, females should be under selection to produce a hatching pattern that provides the best possible trade‐off between the benefits of increased male parental effort and the costs due to reduced offspring fitness.     

Interplay between age‐based competitive asymmetries within the brood and direct competition between inbred and outbred offspring in a burying beetle

Theory suggests that intraspecific competition associated with direct competition between inbred and outbred individuals should be an important determinant of the severity of inbreeding depression. The reason is that, if outbred individuals are stronger competitors than inbred ones, direct competition should have a disproportionate effect on the fitness of inbred individuals. However, an individual's competitive ability is not only determined by its inbreeding status but also by competitive asymmetries that are independent of an individual's inbreeding status. When this is the case, such competitive asymmetries may shape the outcome of direct competition between inbred and outbred individuals. Here, we investigate the interface between age‐based competitive asymmetries within broods and direct competition between inbred and outbred offspring in the burying beetle Nicrophorus vespilloides. We found that inbred offspring had lower survival than outbred ones confirming that there was inbreeding depression. Furthermore, seniors (older larvae) grew to a larger size and had higher survival than juniors (younger larvae), confirming that there were age‐based competitive asymmetries. Nevertheless, there was no evidence that direct competition between inbred and outbred larvae exacerbated inbreeding depression, no evidence that inbreeding depression was more severe in juniors and no evidence that inbred juniors suffered disproportionately due to competition from outbred seniors. Our results suggest that direct competition between inbred and outbred individuals does not necessarily exacerbate inbreeding depression and that inbred individuals are not always more sensitive to poor and stressful conditions than outbred ones.     

Selective positive end-expiratory pressure and intracardiac dimensions in dogs.

Effects of differential ventilation with general vs. selective right (R) and left (L) positive end-expiratory pressure (PEEP) on left (LV) and right ventricular (RV) end-diastolic dimensions were compared in seven pentobarbital-anesthetized dogs. All three modes of PEEP reduced LV cross-sectional area: general PEEP more than RPEEP and RPEEP more than LPEEP. General PEEP and, to a lesser degree, RPEEP decreased both the LV anteroposterior diameter and LV septum-free wall diameter, whereas LPEEP reduced the LV septum-free wall diameter only. Cardiac output was unaffected by LPEEP, whereas general PEEP (20 cmH2O) reduced cardiac output by 48%, and RPEEP (20 cmH2O) reduced it by 23%. RV septum-free wall diameter was not changed by any mode of PEEP. In conclusion, cardiac output was better maintained with selective PEEP than with general PEEP because LV filling was less impeded with selective PEEP. During LPEEP LV assumed a different configuration than during RPEEP and general PEEP, probably reflecting a different pattern of heart-lung interaction.     

Development of an in vivo method for determining material properties of passive myocardium

Calculation of mechanical stresses and strains in the left ventricular (LV) myocardium by the finite element (FE) method relies on adequate knowledge of the material properties of myocardial tissue. In this paper, we present a model-based estimation procedure to characterize the stress-strain relationship in passive LV myocardium. A 3D FE model of the LV myocardium was used, which included morphological fiber and sheet structure and a nonlinear orthotropic constitutive law with different stiffness in the fiber, sheet, and sheet-normal directions. The estimation method was based on measured wall strains. We analyzed the method's ability to estimate the material parameters by generating a set of synthetic strain data by simulating the LV inflation phase with known material parameters. In this way we were able to verify the correctness of the solution and to analyze the effects of measurement and model error on the solution accuracy and stability. A sensitivity analysis was performed to investigate the observability of the material parameters and to determine which parameters to estimate. The results showed a high degree of coupling between the parameters governing the stiffness in each direction. Thus, only one parameter in each of the three directions was estimated. For the tested magnitudes of added noise and introduced model errors, the resulting estimated stress-strain characteristics in the fiber and sheet directions converged with good accuracy to the known relationship. The sheet-normal stress-strain relationship had a higher degree of uncertainty as more noise was added and model error was introduced.