Impact of the zebra mussel Dreissena polymorpha invasion on the budget of suspended material in a shallow lagoon ecosystem

The role of the zebra mussel Dreissena polymorpha in redistribution of total particulate material (TPM) between the water column and bottom sediment was estimated using the TPM budget for a mussel bed in the Curonian lagoon, the Baltic Sea. Seasonal clearance rates were derived from the TPM budget assuming two resuspension scenarios: no resuspension and full resuspension of biodeposits. Estimated clearance rates for both scenarios were compared with the rates calculated from the population clearance rate model. Seasonal clearance rates estimated using the population model (1.1 and 11.8 l g⁻¹ SFDW day⁻¹) fitted well into the interval of seasonal clearance rates calculated from TPM budgets assuming no resuspension of biodeposits (3.2 and 21.4 l g SFDW⁻¹ day⁻¹). In the scenario with biodeposits resuspension clearance rates were much higher (57.4 and 148.9 g SFDW⁻¹ day⁻¹). The ratio of clearance to residence time was highly dependent on the fate of biodeposits. Therefore its use in interpretation of the species impact on TPM was limited. An alternative measure based on the ratio of the amount of TPM biodeposited to TPM transported into the bed was used. It was found that zebra mussels are able to deposit between 10 and 30% of the incoming TPM, and the amount of biodeposited material was correlated with water residence time. Results indicate that the impact of zebra mussels on TPM in the lagoon is small relative to the high transport rates of TPM over the bed. However, annual biosedimentation rate (~590 g m⁻²) in the mussel bed was higher than physical deposition rate (~380 g m⁻²) in accumulation areas devoid of large suspension feeders. We suggest that a local impact due to enhanced availability of organic material to other trophic groups of associated benthic organisms may be more significant than effects on TPM pathways at an ecosystem scale.     

Analysis of allergenic pollen data,focusing on a pollen load threshold statement

Aerobiologia - Airborne allergenic pollen affects a significant part of the population and the information on pollen load is a valuable tool for public health prevention. The messages should be...     

Gene Polymorphisms of Micrornas in Helicobacter pylori-Induced High Risk Atrophic Gastritis and Gastric Cancer

Background and aims

MicroRNAs (miRNAs) are known for their function as translational regulators of tumor suppressor or oncogenes. Single nucleotide polymorphisms (SNPs) in miRNAs related genes have been shown to affect the regulatory capacity of miRNAs and were linked with gastric cancer (GC) and premalignant gastric conditions. The purpose of this study was to evaluate potential associations between miRNA-related gene polymorphisms (miR-27a, miR-146a, miR-196a-2, miR-492 and miR-608) and the presence of GC or high risk atrophic gastritis (HRAG) in European population.

Methods

Gene polymorphisms were analyzed in 995 subjects (controls: n = 351; GC: n = 363; HRAG: n = 281) of European descent. MiR-27a T>C (rs895819), miR-146a G>C (rs2910164), miR-196a-2 C>T (rs11614913), miR-492 G>C (rs2289030) and miR-608 C>G (rs4919510) SNPs were genotyped by RT-PCR.

Results

Overall, SNPs of miRNAs were not associated with the presence of GC or HRAG. We observed a tendency for miR-196a-2 CT genotype to be associated with higher risk of GC when compared to CC genotype, however, the difference did not reach the adjusted P-value (odds ratio (OR) - 1.46, 95% confidence interval (CI) 1.03-2.07, P = 0.032). MiR-608 GG genotype was more frequent in GC when compared to controls (OR −2.34, 95% CI 1.08–5.04), but significance remained marginal (P = 0.029). A similar tendency was observed in a recessive model for miR-608, where CC + CG vs GG genotype comparison showed a tendency for increased risk of GC with OR of 2.44 (95% CI 1.14–5.22, P = 0.021). The genotypes and alleles of miR-27a, miR-146a, miR-196a-2, miR-492 and miR-608 SNPs had similar distribution between histological subtypes of GC and were not linked with the presence of diffuse or intestinal-type GC.

Conclusions

Gene polymorphisms of miR-27a, miR-146a, miR-196a-2, miR-492, miR-492a and miR-608 were not associated with the presence of HRAG, GC or different histological subtypes of GC in European subjects.     

The roles of carbonic anhydrases IX and XII in cancer cell adhesion,migration, invasion and metastasis

The main function of carbonic anhydrases (CAs) in cancer cells is the pH regulation through a conversion of H₂O and CO₂ to H⁺ and HCO₃⁻. However, the data of in vitro and in vivo studies have demonstrated that transmembrane isoforms of CA IX and CA XII are involved in various steps of cancer cell migration, invasion and metastasis. According to literature, inhibition of these CAs can affect the expression of multiple proteins. Some scientific groups have reported the possible interactions between CA IX and E-cadherin–catenin system, CA IX and integrins, CA IX, CA XII and ion transporters, which all are highly involved in cell-to-cell adhesion, the formation of membrane protrusions and focal adhesions. Nevertheless, CA IX and CA XII have a high impact on tumour growth and metastases formation. The data discussed in this review are quite recent. It highly support the role of CA IX and CA XII in various cancer metastasis processes through their interactions to other invasion proteins. Nevertheless, all findings show the great potential of these CAs in the context of research and application in clinical use.     

Making water flow: a comparison of the hydrodynamic characteristics of 12 different benthic biological flumes

Flume tanks are becoming increasingly important research tools in aquatic ecology, to link biological to hydrodynamical processes. There is no such thing as a “standard flume tank”, and no flume tank is suitable for every type of research question. A series of experiments has been carried out to characterise and compare the hydrodynamic characteristics of 12 different flume tanks that are designed specifically for biological research. These facilities are part of the EU network BioFlow. The flumes could be divided into four basic design types: straight, racetrack, annular and field flumes. In each facility, two vertical velocity profiles were measured: one at 0.05 m s⁻¹ and one at 0.25 m s⁻¹. In those flumes equipped with Acoustic Doppler Velocimeters (ADV), time series were also recorded for each velocity at two heights above the bottom: 0.05 m and 20% of the water depth. From these measurements turbulence characteristics, such as TKE and Reynolds stress, were derived, and autocorrelation spectra of the horizontal along-stream velocity component were plotted. The flume measurements were compared to two sets of velocity profiles measured in the field.Despite the fact that some flumes were relatively small, turbulence was fully developed in all channels. Straight and racetrack flumes generally produced boundary layers with a clearly definable logarithmic layer, similar to measurements in the field taken under steady flow conditions. The two annular flumes produced relatively thin boundary layers, presumably due to secondary flows developing in the curved channels. The profiles in the field flumes also differed considerably from the expected log profile. This may either have been due the construction of the flume, or due to unsteady conditions during measurement. Constraints imposed by the different flume designs on the suitability for different types of boundary layer research, as well as scaling issues are discussed.     

The Closest Relatives of Icosahedral Viruses of Thermophilic Bacteria Are among Viruses and Plasmids of the Halophilic Archaea

We have sequenced the genome and identified the structural proteins and lipids of the novel membrane-containing, icosahedral virus P23-77 of Thermus thermophilus. P23-77 has an ∼17-kb circular double-stranded DNA genome, which was annotated to contain 37 putative genes. Virions were subjected to dissociation analysis, and five protein species were shown to associate with the internal viral membrane, while three were constituents of the protein capsid. Analysis of the bacteriophage genome revealed it to be evolutionarily related to another Thermus phage (IN93), archaeal Halobacterium plasmid (pHH205), a genetic element integrated into Haloarcula genome (designated here as IHP for integrated Haloarcula provirus), and the Haloarcula virus SH1. These genetic elements share two major capsid proteins and a putative packaging ATPase. The ATPase is similar with the ATPases found in the PRD1-type viruses, thus providing an evolutionary link to these viruses and furthering our knowledge on the origin of viruses.Three-dimensional structures of the major capsid proteins, as well as the architecture of the virion and the sequence similarity of putative genome packaging ATPases, have revealed unexpected evolutionary connection between virus families. Viruses infecting hosts residing in different domains of life (Bacteria, Archaea, and Eukarya) share common structural elements and possibly also ways to package the viral genome (8, 13, 41). It has been proposed that the set of genes responsible for virion assembly is a hallmark of the virus and is designated as the innate viral “self,” which may retain its identity through evolutionary times (5). Based on this, it is proposed that viruses can be classified into lineages that span the different domains of life. Therefore, the studies of new virus isolates might provide insights into the events that led to the origin of viruses and maybe even the origin of life itself (34, 40). However, viruses are known to be genetic mosaics (28), and these structural lineages therefore do not reflect the evolutionary history of all genes in a given virus. For example, the genome replication strategies vary significantly even in the currently established lineages (41) and, consequently, a structural approach does not point out to a specific form of replication in the ancestor. Nevertheless, as the proposal for a viral self is driven from information on viral structures and pathways of genome encapsidation, the ancestral form of the self was likely to be composed of a protective coat and the necessary mechanisms to incorporate the genetic material within the coat.Viruses structurally related to bacteriophage PRD1, a phage infecting gram-negative bacteria, have been identified in all three domains of life, and the lineage hypothesis was first proposed based on structural information on such viruses. Initially, PRD1 and human adenovirus were proposed to originate from a common ancestor mainly due to the same capsid organization (T=25) and the major coat protein topology, the trimeric double β-barrel fold (12). In addition, these viruses share a common vertex organization and replication mechanism (20, 31, 53, 63). PRD1 is an icosahedral virus with an inner membrane, whereas adenovirus lacks the membrane. Later, many viruses with similar double β-barrel fold in the major coat protein have been discovered and included to this viral lineage. For example, the fold is present in Paramecium bursaria Chlorella virus 1 (56) of algae, Bam35 (45) of gram-positive bacteria, PM2 (2) of gram-negative marine bacteria, and Sulfolobus turreted icosahedral virus (STIV) (38) of an archaeal host. Moreover, genomic analyses have revealed a common set of genes in a number of nucleocytoplasmic large DNA viruses. Chilo iridescent virus and African swine fever virus 1 are related to Paramecium bursaria Chlorella virus 1 and most probably share structural similarity to PRD1-type viruses (13, 30, 31, 68). The largest known viruses, represented by mimivirus and poxvirus, may also belong to this lineage (29, 77). Two euryarchaeal proviruses, TKV4 and MVV, are also proposed to belong to this lineage based on bioinformatic searches (42). The proposed PRD1-related viruses share the same basic architectural principles despite major differences in the host organisms and particle and genome sizes (1, 2, 38, 56). PM2, for example, has a genome of only 10 kbp, whereas mimivirus (infecting Acanthamoeba polyphaga) double-stranded DNA (dsDNA) genome is 1.2 Mbp in size (59).How many virion structure-based lineages might there be? This obviously relates to the number of protein folds that have the properties needed to make viral capsids. It has been noted that, in addition to PRD1-type viruses, at least tailed bacterial and archaeal viruses, as well as herpesviruses, share the same coat protein fold. Also, certain dsRNA viruses seem to have structural and functional similarities, although their hosts include bacteria and yeasts, as well as plants and animals (6, 18, 19, 27, 55, 60, 74). Obviously, many structural principles to build a virus capsid exist, and it has been suggested that especially geothermally heated environments have preserved many of the anciently formed virus morphotypes (35).Thermophilic dsDNA bacteriophage P23-77 was isolated from an alkaline hot spring in New Zealand on Thermus thermophilus (17) ATCC 33923 (deposited as Thermus flavus). P23-77 was shown to have an icosahedral capsid and possibly an internal membrane but no tail (81). Previously, another Thermus virus, IN93, with a similar morphology has been described (50). IN93 was inducible from a lysogenic strain of Thermus aquaticus TZ2, which was isolated from hot spring soil in Japan. Recently, P23-77 was characterized in more detail (33). It has an icosahedral protein coat, organized in a T=28 capsid lattice (21). The presence of an internal membrane was confirmed, and lipids were shown to be constituents of the virion. Ten structural proteins were identified, with apparent molecular masses ranging from 8 to 35 kDa. Two major protein species with molecular masses of 20 and 35 kDa were proposed to make the capsomers, one forming the hexagonal building blocks and the other the two towers that decorate the capsomer bases (33). Surprisingly, P23-77 is structurally closest to the haloarchaeal virus SH1, which is the only other example of a T=28 virion architecture (32, 33). In both cases it was proposed that the capsomers are made of six single β-barrels opposing the situation with the other structurally related viruses where the hexagonal capsomers are made of three double β-barrel coat protein monomers (8).In the present study we analyze the dsDNA genome of P23-77. Viral membrane proteins and those associated with the capsid were identified by virion dissociation studies. The protein chemistry data and genome annotation are consistent with the results of the disruption studies. A detailed analysis of the lipid composition of P23-77 and its T. thermophilus host was carried out. The data collected here reveal additional challenges in attempts to generate viral lineages based on the structural and architectural properties of the virion.     

Density effects on the clearance rate of the zebra mussel <Emphasis Type="Italic">Dreissena polymorpha</Emphasis>: flume study results

Zebra mussel filtration rates and regulating factors have been addressed earlier in a number of studies. Still, only a few of them have taken into consideration the refiltration phenomenon, and therefore the direct extrapolation of experimental results may only give the potential filtering capacity, and hence, over- or underestimate the actual amount of seston being removed by zebra mussels in an ecosystem. The current experimental study aimed to gain insight into the refiltration effect on the clearance rate of the zebra mussels at relatively high seston concentrations, and its potential role in controlling the filtration efficiency of the zebra mussel population. The experiment was conducted in a laboratory flume following the Latin squares design with one fixed (mussel density) and three random factors (initial total particulate matter (TPM) concentration, flume “wall effect” and distance from the flume inflow area) considered. The results showed the significant effects of mussel density and the TPM concentration on the effective clearance rate (ECR) of zebra mussels. The higher ECR values were obtained at denser mussel clumps and lower TPM concentrations. The flume “wall effect” had no significant effect on the ECR, whereas the distance from the flume inflow area appeared to have a significant impact. A positive relationship between ECR and the zebra mussel density was most evident in the proximity of the TPM source. Based on the results, we assume that at high TPM concentration, refiltration may assert itself by the elevated net clearance rate of mussels within dense clumps compared to that of mussels at relatively low individual densities. This should be taken into consideration while modelling and assessing the role of the zebra mussel in energy flow and redistribution of organic matter in an ecosystem.     

Habitat engineering by the invasive zebra mussel <Emphasis Type="Italic">Dreissena polymorpha</Emphasis> (Pallas) in a boreal coastal lagoon: impact on biodiversity

Habitat engineering role of the invasive zebra mussel Dreissena polymorpha (Pallas) was studied in the Curonian lagoon, a shallow water body in the SE Baltic. Impacts of live zebra mussel clumps and its shell deposits on benthic biodiversity were differentiated and referred to unmodified (bare) sediments. Zebra mussel bed was distinguished from other habitat types by higher benthic invertebrate biomass, abundance, and species richness. The impact of live mussels on biodiversity was more pronounced than the effect of shell deposits. The structure of macrofaunal community in the habitats with >10³ g/m² of shell deposits devoid of live mussels was similar to that found within the zebra mussel bed. There was a continuous shift in species composition and abundance along the gradient ‘bare sediments—shell deposits—zebra mussel bed’. The engineering impact of zebra mussel on the benthic community became apparent both in individual patches and landscape-level analyses.     

A network of SMG-8, SMG-9 and SMG-1 C-terminal insertion domain regulates UPF1 substrate recruitment and phosphorylation

Mammalian nonsense-mediated mRNA decay (NMD) is a eukaryotic surveillance mechanism that degrades mRNAs containing premature translation termination codons. Phosphorylation of the essential NMD effector UPF1 by the phosphoinositide-3-kinase-like kinase (PIKK) SMG-1 is a key step in NMD and occurs when SMG-1, its two regulatory factors SMG-8 and SMG-9, and UPF1 form a complex at a terminating ribosome. Electron cryo-microscopy of the SMG-1–8–9-UPF1 complex shows the head and arm architecture characteristic of PIKKs and reveals different states of UPF1 docking. UPF1 is recruited to the SMG-1 kinase domain and C-terminal insertion domain, inducing an opening of the head domain that provides access to the active site. SMG-8 and SMG-9 interact with the SMG-1 C-insertion and promote high-affinity UPF1 binding to SMG-1–8–9, as well as decelerated SMG-1 kinase activity and enhanced stringency of phosphorylation site selection. The presence of UPF2 destabilizes the SMG-1–8–9-UPF1 complex leading to substrate release. Our results suggest an intricate molecular network of SMG-8, SMG-9 and the SMG-1 C-insertion domain that governs UPF1 substrate recruitment and phosphorylation by SMG-1 kinase, an event that is central to trigger mRNA decay.