Effects on interfacial properties and cell adhesion of surface modification by pectic hairy regions

Polystyrene Petri dishes, aminated by a plasma deposition process, were surface modified by the covalent linking of two different enzymatically modified hairy regions (HRs) from pectin containing, for example, rhamnogalacturonan-I and xylogalacturonan structural elements. The two polysaccharide preparations share the same structural elements of apple pectin, but the relative amounts and lengths of the neutral side chains present differ. Surface analysis by X-ray photoelectron spectroscopy, contact angle measurement, and atomic force microscope (AFM) force-separation curves was used to characterize the effects on surface chemistry and interfacial forces of the surface modification process. Cell adhesion experiments using continuous L-929 fibroblasts and primary aortic smooth muscle cells were performed to evaluate the effect of the polysaccharide nature on cell adhesion. Results show that immobilization of the HR affects the interfacial field of forces and the cell behavior: "equilibrium" contact angles, obtained by a recently introduced vibrational approach, decrease after HR immobilization reaching a value close to 20 degrees . AFM force-separation curves show a more extended (or softer) interface in the case of the HR bearing longer side chains. Accordingly, depending on the HR preparation, cells shifted from spread morphology and adhesion behavior quantitatively comparable to that observed on conventional tissue culture polystyrene to rounded morphology and significantly lower adhesion. These data show that engineering of plant pectins can be a valuable tool to prepare novel and finely tuned polysaccharides having different chemico-physical and biological properties, to be used in the surface modification of medical devices and materials.     

Gas vesicles isolated from Halobacterium cells by lysis in hypotonic solution are structurally weakened

Analysis of pressure-collapse curves of Halobacterium cells containing gas vesicles and of gas vesicles released from such cells by hypotonic lysis shows that the isolated gas vesicles are considerably weaker than those present within the cells: their mean critical collapse pressure was around 0.049-0.058 MPa, as compared to 0.082-0.095 MPa for intact cells. The hypotonic lysis procedure, which is widely used for the isolation of gas vesicles from members of the Halobacteriaceae, thus damages the mechanical properties of the vesicles. The phenomenon can possibly be attributed to the loss of one or more structural gas vesicle proteins such as GvpC, the protein that strengthens the vesicles built of GvpA subunits: Halobacterium GvpC is a highly acidic, typically "halophilic" protein, expected to denature in the absence of molar concentrations of salt.     

Buoyancy studies in natural communities of square gas-vacuolate archaea in saltern crystallizer ponds

Background

Possession of gas vesicles is generally considered to be advantageous to halophilic archaea: the vesicles are assumed to enable the cells to float, and thus reach high oxygen concentrations at the surface of the brine.

Results

We studied the possible ecological advantage of gas vesicles in a dense community of flat square extremely halophilic archaea in the saltern crystallizer ponds of Eilat, Israel. We found that in this environment, the cells' content of gas vesicles was insufficient to provide positive buoyancy. Instead, sinking/floating velocities were too low to permit vertical redistribution.

Conclusion

The hypothesis that the gas vesicles enable the square archaea to float to the surface of the brines in which they live was not supported by experimental evidence. Presence of the vesicles, which are mainly located close to the cell periphery, may provide an advantage as they may aid the cells to position themselves parallel to the surface, thereby increasing the efficiency of light harvesting by the retinal pigments in the membrane.     

Advantage of using inosine at the 3' termini of 16S rRNA gene universal primers for the study of microbial diversity

To overcome the shortcomings of universal 16S rRNA gene primers 8F and 907R when studying the diversity of complex microbial communities, the 3' termini of both primers were replaced with inosine. A comparison of the clone libraries derived using both primer sets showed seven bacterial phyla amplified by the altered primer set (8F-I/907R-I) whereas the original set amplified sequences belonging almost exclusively to Proteobacteria (95.8%). Sequences belonging to Firmicutes (42.6%) and Thermotogae (9.3%) were more abundant in a library obtained by using 8F-I/907R-I at a PCR annealing temperature of 54 degrees C, while Proteobacteria sequences were more frequent (62.7%) in a library obtained at 50 degrees C, somewhat resembling the result obtained using the original primer set. The increased diversity revealed by using primers 8F-I/907R-I confirms the usefulness of primers with inosine at the 3' termini in studying the microbial diversity of environmental samples.     

Substitution by Inosine at the 3��-Ultimate and Penultimate Positions of 16S rRNA Gene Universal Primers

Universal 16S rRNA gene primers (8F and 518R) bearing inosine substitutions at either the 3??-ultimate or the 3??-ultimate and penultimate base positions were exploited for the first time to study the bacterial community associated with coral polymicrobial Black Band Disease (BBD). Inosine-modified universal primer pairs display some shifting in the composition of 16S rRNA gene libraries, as well as expanding the observed diversity of a BBD bacterial community at the family/class level. Possible explanations for the observed shifts are discussed. These results thus point to the need for adopting multiple approaches in designing 16S rRNA universal primers for PCR amplification and subsequent construction of 16S rRNA gene libraries or pyrosequencing in the exploration of complex microbial communities.     

Advantage of Using Inosine at the 3′ Termini of 16S rRNA Gene Universal Primers for the Study of Microbial Diversity

To overcome the shortcomings of universal 16S rRNA gene primers 8F and 907R when studying the diversity of complex microbial communities, the 3′ termini of both primers were replaced with inosine. A comparison of the clone libraries derived using both primer sets showed seven bacterial phyla amplified by the altered primer set (8F-I/907R-I) whereas the original set amplified sequences belonging almost exclusively to Proteobacteria (95.8%). Sequences belonging to Firmicutes (42.6%) and Thermotogae (9.3%) were more abundant in a library obtained by using 8F-I/907R-I at a PCR annealing temperature of 54°C, while Proteobacteria sequences were more frequent (62.7%) in a library obtained at 50°C, somewhat resembling the result obtained using the original primer set. The increased diversity revealed by using primers 8F-I/907R-I confirms the usefulness of primers with inosine at the 3′ termini in studying the microbial diversity of environmental samples.     

Unlocking the phylogenetic diversity,primary habitats,and abundances of free‐living Symbiodiniaceae on a coral reef

Dinoflagellates of the family Symbiodiniaceae form mutualistic symbioses with marine invertebrates such as reef‐building corals, but also inhabit reef environments as free‐living cells. Most coral species acquire Symbiodiniaceae horizontally from the surrounding environment during the larval and/or recruitment phase, however the phylogenetic diversity and ecology of free‐living Symbiodiniaceae on coral reefs is largely unknown. We coupled environmental DNA sequencing and genus‐specific qPCR to resolve the community structure and cell abundances of free‐living Symbiodiniaceae in the water column, sediment, and macroalgae and compared these to coral symbionts. Sampling was conducted at two time points, one of which coincided with the annual coral spawning event when recombination between hosts and free‐living Symbiodiniaceae is assumed to be critical. Amplicons of the internal transcribed spacer (ITS2) region were assigned to 12 of the 15 Symbiodiniaceae genera or genera‐equivalent lineages. Community compositions were separated by habitat, with water samples containing a high proportion of sequences corresponding to coral symbionts of the genus Cladocopium, potentially as a result of cell expulsion from in hospite populations. Sediment‐associated Symbiodiniaceae communities were distinct, potentially due to the presence of exclusively free‐living species. Intriguingly, macroalgal surfaces displayed the highest cell abundances of Symbiodiniaceae, suggesting a key role for macroalgae in ensuring the ecological success of corals through maintenance of a continuum between environmental and symbiotic populations of Symbiodiniaceae.     

Enzymatically-tailored pectins differentially influence the morphology, adhesion, cell cycle progression and survival of fibroblasts

Improved biocompatibility and performance of biomedical devices can be achieved through the incorporation of bioactive molecules on device surfaces. Five structurally distinct pectic polysaccharides (modified hairy regions (MHRs)) were obtained by enzymatic liquefaction of apple (MHR-B, MHR-A and MHR-alpha), carrot (MHR-C) and potato (MHR-P) cells. Polystyrene (PS) Petri dishes, aminated by a plasma deposition process, were surface modified by the covalent linking of the MHRs. Results clearly demonstrate that MHR-B induces cell adhesion, proliferation and survival, in contrast to the other MHRs. Moreover, MHR-alpha causes cells to aggregate, decrease proliferation and enter into apoptosis. Cells cultured in standard conditions with 1% soluble MHR-B or MHR-alpha show the opposite behaviour to the one observed on MHR-B and -alpha-grafted PS. Fibronectin was similarly adsorbed onto MHR-B and tissue culture polystyrene (TCPS) control, but poorly on MHR-alpha. The Fn cell binding site (RGD sequence) was more accessible on MHR-B than on TCPS control, but poorly on MHR-alpha. The disintegrin echistatin inhibited fibroblast adhesion and spreading on MHR-B-grafted PS, which suggests that MHRs control fibroblast behaviour via serum-adhesive proteins. This study provides a basis for the design of intelligently-tailored biomaterial coatings able to induce specific cell functions.