Chemical synthesis and surface activity of lung surfactant phospholipid analogs. III. Chiral N-substituted ether-amide phosphonolipids

A homologous series of chiral (R) ether-amide phosphonolipid analogs of naturally occurring (R) glycerophospholipids were synthesized and characterized for their interfacial behaviors. The phosphonolipids possess isoteric ether, amide, and phosphonate functions at positions corresponding to the sn-1, sn-2, and sn-3 ester functions, respectively, of naturally occurring glycerophospholipids. All compounds were synthesized with disaturated C16:0 alkyl/acyl moieties to give structural analogy with dipalmitoyl phosphatidylcholine (DPPC), the major glycerophospholipid component of lung surfactant. Further substitutions at the headgroup nitrogen were also used to generate differences in headgroup size and polarity in the synthetic compounds. The surface activity of the ether-amide phospholipids was investigated in terms of adsorption to the air-water interface, together with studies of dynamic respreading after monolayer collapse and surface tension lowering in dynamically compressed spread films and dispersions. Results showed that several ether-amide phosphonolipids had more rapid adsorption and improved dynamic respreading behavior compared to DPPC, plus the ability to lower surface tension into the range of less than 1 to 4 mN/m in spread films and in dispersions under dynamic conditions. In combination with a series of diether phosphonolipids synthetized in a companion study [1], these ether-amide compounds are useful in the development of molecular structure-surface activity correlates for lung surfactant-related materials, and should assist in investigating the specificity of interactions between phospholipids and other pulmonary biological molecules.     

Novel assembly properties of recombinant spider dragline silk proteins

Spider dragline silk, which exhibits extraordinary strength and toughness, is primarily composed of two related proteins that largely consist of repetitive sequences. In most spiders, the repetitive region of one of these proteins is rich in prolines, which are not present in the repetitive region of the other. The absence of prolines in one component was previously speculated to be essential for the thread structure. Here, we analyzed dragline proteins of the garden spider Araneus diadematus, ADF-3 and ADF-4, which are both proline rich, by employing the baculovirus expression system. Whereas ADF-3 represented an intrinsically soluble protein, ADF-4 was insoluble in vitro and self-assembled into filaments in the cytosol of the host insect cells. These ADF-4 filaments displayed the exceptional chemical stability of authentic silk threads. We provide evidence that the observed properties of ADF-3 and ADF-4 strongly depend on intrinsic characteristics such as hydropathicity, which differs dramatically between the two proteins, as in most other pairs of dragline silk proteins from other Araneoidea species, but not on their proline content. Our findings shed new light on the structural components of spider dragline silk, allowing further elucidation of their assembly properties, which may open the door for commercial applications.     

Oligomerization and regulated proteolytic processing of angiopoietin-like protein 4

Angiopoietin-like protein 4 (Angptl4) is a recently identified circulating protein expressed primarily in adipose tissue and liver. Also known as peroxisome proliferator-activated receptor (PPAR)-gamma angiopoietin-related, fasting induced adipose factor, and hepatic fibrinogen/angiopoietin-related protein, recombinant Angptl4 causes increase of plasma very low density lipoprotein levels by inhibition of lipoprotein lipase activity. Similar to angiopoietins and other angiopoietin-like proteins, Angptl4 contains an amino-terminal coiled-coil domain and a carboxyl-terminal fibrinogen-like domain. We report here that Angptl4 is evolutionarily conserved among several mammalian species and that full-length Angptl4 protein is an oligomer containing intermolecular disulfide bonds. Oligomerized Angptl4 undergoes proteolytic processing to release its carboxyl fibrinogen-like domain, which circulates as a monomer. Angptl4's N-terminal coiled-coil domain mediates its oligomerization, which by itself is sufficient to form higher order oligomeric structure. Adenovirus-mediated overexpression of Angptl4 in 293 cells shows that conversion of full-length, oligomerized Angptl4 is mediated by a cell-associated protease activity induced by serum. These findings demonstrate a novel property of angiopoietin-like proteins and suggest that oligomerization and proteolytic processing of Angptl4 may regulate its biological activities in vivo.     

Hormonal control of C. elegans dauer formation and life span by a Rieske-like oxygenase

C. elegans diapause, gonadal outgrowth, and life span are regulated by a lipophilic hormone, which serves as a ligand to the nuclear hormone receptor DAF-12. A key step in hormone production is catalyzed by the CYP450 DAF-9, but the extent of the biosynthetic pathway is unknown. Here, we identify a conserved Rieske-like oxygenase, DAF-36, as a component in hormone metabolism. Mutants display larval developmental and adult aging phenotypes, as well as patterns of epistasis similar to that of daf-9. Larval phenotypes are potently reversed by crude lipid extracts, 7-dehydrocholesterol, and a recently identified DAF-12 sterol ligand, suggesting that DAF-36 works early in the hormone biosynthetic pathway. DAF-36 is expressed primarily within the intestine, a major organ of metabolic and endocrine control, distinct from DAF-9. These results imply that C. elegans hormone production has multiple steps and is distributed, and that it may provide one way that tissues register their current physiological state during organismal commitments.     

A Mutation in the luxS gene influences Listeria monocytogenes biofilm formation

Using a Vibrio harveyi reporter strain, we demonstrated that Listeria monocytogenes secretes a functional autoinducer 2 (AI-2)-like signal. A luxS-deficient mutant produced a denser biofilm and attached to a glass surface 19-fold better than the parent strain. Exogenous AI-2 failed to restore the wild-type phenotype to the mutant. It seems that an intact luxS gene is associated with repression of components required for attachment and biofilm formation.     

Mating disruption of Lobesia botrana (Lepidoptera: Tortricidae): effect of pheromone formulations and concentrations

The reluctance of Israeli vine growers to adopt the mating disruption technique to control the moth Lobesia botrana Den. & Schiff. has been attributed to the high cost of this method compared with that of traditional insecticide control. In this study, we tested the possibility of reducing the cost, first by testing different pheromone formulations (and thus open the market for competition) and second by reducing the pheromone concentration used in vineyards. Comparisons were made between two pheromone formulations--Shin-Etsu (Tokyo, Japan) at 165 g/ha and Concep (Sutera, Bend, OR) at 150 g/ha--and between two concentrations of Shin-Etsu, 165 and 110 g/ha. Pheromone dispensers were placed at the onset of the second moth generation. Comparison of the numbers of clusters infested with eggs and larvae of L. botrana showed no significant differences in the performance, either between the two formulations, or between the two tested concentrations. The results suggest that 1) the two formulations are equally effective, and 2) a low pheromone concentration is sufficient to maintain good control of small populations of L. botrana. However, when the population is high, pest control efficacy is not improved by increasing the pheromone concentration. Therefore, in the interest of reducing the relatively high cost of mating disruption, we emphasize that increasing the pheromone concentration does not provide improved control of high populations of L. botrana. The cost of mating disruption can be diminished by reducing the applied pheromone concentration and by using the least expensive pheromone formulations     

A proposed model for dragline spider silk self‐assembly: Insights from the effect of the repetitive domain size on fiber properties

Dragline spider silk has been intensively studied for its superior qualities as a biomaterial. In previous studies, we made use of the baculovirus mediated expression system for the production of a recombinant Araneus diadematus spider silk dragline ADF4 protein and its self‐assembly into intricate fibers in host insect cells. In this study, our aim was to explore the function of the major repetitive domain of the dragline spider silk. Thus, we generated an array of synthetic proteins, each containing a different number of identical repeats up to the largest recombinantly expressed spider silk to date. Study of the self‐assembly properties of these proteins showed that depending on the increasing number of repeats they give rise to different assembly phenotypes, from a fully soluble protein to bona fide fibers with superior qualities. The different assembly forms, the corresponding chemical resistance properties obtained as well as ultrastructural studies, revealed novel insights concerning the structure and intermolecular interactions of the repetitive and nonrepetitive domains. Based on these observations and current knowledge in the field, we hereby present a comprehensive hypothetical model for the mechanism of dragline silk self‐assembly and fiber formation. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 458–468, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

An essential role for the C-terminal domain of a dragline spider silk protein in directing fiber formation

We have employed baculovirus-mediated expression of the recombinant A. diadematus spider dragline silk fibroin rADF-4 to explore the role of the evolutionary conserved C-terminal domain in self-assembly of the protein into fiber. In this unique system, polymerization of monomers occurs in the cytoplasm of living cells, giving rise to superfibers, which resemble some properties of the native dragline fibers that are synthesized by the spider using mechanical spinning. While the C-terminal containing rADF-4 self-assembled to create intricate fibers in the host insect cells, a C-terminal deleted form of the protein (rADF-4-DeltaC) self-assembled to create aggregates, which preserved the chemical stability of dragline fibers, yet lacked their shape. Interestingly, ultrastructural analysis showed that the rADF-4-DeltaC monomers did form rudimentary nanofibers, but these were short and crude as compared to those of rADF-4, thus not supporting formation of the highly compact and oriented "superfiber" typical to the rADF-4 form. In addition, using thermal analysis, we show evidence that the rADF-4 fibers but not the rADF-4-DeltaC aggregates contain crystalline domains, further establishing the former as a veritable model of authentic dragline fibers. Thus, we conclude that the conserved C-terminal domain of dragline silk is important for the correct structure of the basic nanofibers, which assemble in an oriented fashion to form the final intricate natural-like dragline silk fiber.