Investigation of factors influencing drug release using calcium alginate polymer

The effects of mixing, the sodium alginate concentration, and calcium chloride concentration on the release of sulphamethoxazole (model drug) impregnated in calcium alginate beads were investigated and evaluated. The release behaviour of the sulphamethoxazole from the calcium alginate beads was studied in a 0.1N HCl aqueous solution at 37v°C. The release rate of the sulphamethoxazole depends heavily on the type of mixers during the formation of the drug-alginate beads. The highest release rate was achieved when four-bladed rectangular agitator was used while the lowest release was achieved when magnetic stirrer was used. The amount of the released sulphamethoxazole varies slightly with the variation of the alginate concentration. The total release of sulphamethoxazole when 1% w/v solution of sodium alginate was used found to be 80% of the total drug content while 72% and 68% of the total drug content for 1.5% and 2% sodium alginate solutions. Three different calcium chloride concentrations were used (i.e., 5%, 10%, and 15% CaCl₂). The effect of the calcium chloride concentration on the release of the sulphamethoxazole is very pronounced.     

Comparison of Tissue Metal Concentrations in Zucker Lean, Zucker Obese, and Zucker Diabetic Fatty Rats and the Effects of Chromium Supplementation on Tissue Metal Concentrations

Diabetes results in several metabolic changes, including alterations in the transport, distribution, excretion, and accumulation of metals. While changes have been examined in several rat models of insulin resistance and diabetes, the metal ion concentrations in the tissues of Zucker lean, Zucker obese (an insulin resistance and early stage diabetes model), and Zucker diabetic fatty (ZDF, a type 2 diabetes model) have not previously been examined in detail. The concentration of Cu, Zn, Fe, Mg, and Ca were examined in the liver, kidney, heart and spleen, and Cr concentration in the liver and kidney of these rats were examined. Zucker obese rats have a reduction in the concentration of Cu, Zn, Fe, Mg in the liver compared to ZDF and/or lean Zucker rats, presumably as a result of the increased fat content of the liver of the obese rats. ZDF rats have increased concentrations of kidney Cu compared to the lean rats, while kidney Ca concentrations are increased in the Zucker obese rats. Spleen Fe concentrations are decreased in Zucker obese rats compared to the lean rats. No effects on metal concentrations in the heart were observed between the lean, obese, and ZDF rats, and no effects on Cr concentrations were identified. Cr(III) complexes have previously been shown to have beneficial effects on the signs of insulin resistance in Zucker obese and ZDF rats. The effects of daily gavage administration of chromium picolinate ([Cr(pic)₃]) (1 mg?Cr/kg body mass), CrCl₃ (1 mg?Cr/kg body mass), and Cr3 ([Cr₃O(propionate)₆(H₂O)₃]⁺) (33 μg and 1 mg?Cr/kg body mass) on metal concentrations in these tissues were examined. Treatment with CrCl₃ and Cr3, but not [Cr(pic)₃], at 1 mg?Cr/kg resulted in a statistically significant accumulation of Cr in the kidney of lean and obese but not ZDF rats but resulted in lowering the elevated levels of kidney Cu in ZDF rats, suggesting a beneficial effect on this symptom of type 2 diabetes.     

Severity of Old World Cutaneous Leishmaniasis Is Influenced by Previous Exposure to Sandfly Bites in Saudi Arabia

BackgroundThe sandfly Phlebotomus papatasi is the vector of Leishmania major, the main causative agent of Old World cutaneous leishmaniasis (CL) in Saudi Arabia. Sandflies inject saliva while feeding and the salivary protein PpSP32 was previously shown to be a biomarker for bite exposure. Here we used recombinant PpSP32 to evaluate human exposure to Ph. papatasi bites, and study the association between antibody response to saliva and CL in endemic areas in Saudi Arabia.ConclusionsOur findings suggest a possible correlation between the type of immunity generated by the exposure to sandfly bites and disease outcome.     

A 3-Component Mixture of Rayleigh Distributions: Properties and Estimation in Bayesian Framework

To study lifetimes of certain engineering processes, a lifetime model which can accommodate the nature of such processes is desired. The mixture models of underlying lifetime distributions are intuitively more appropriate and appealing to model the heterogeneous nature of process as compared to simple models. This paper is about studying a 3-component mixture of the Rayleigh distributionsin Bayesian perspective. The censored sampling environment is considered due to its popularity in reliability theory and survival analysis. The expressions for the Bayes estimators and their posterior risks are derived under different scenarios. In case the case that no or little prior information is available, elicitation of hyperparameters is given. To examine, numerically, the performance of the Bayes estimators using non-informative and informative priors under different loss functions, we have simulated their statistical properties for different sample sizes and test termination times. In addition, to highlight the practical significance, an illustrative example based on a real-life engineering data is also given.     

Influence of force fields on the selective diffusion of para-xylene over ortho-xylene in 10-ring zeolites

A molecular dynamics study of diffusion of p-xylene and o-xylene has been performed over three different pure silica 10-ring zeolites, MFI, SFG and TUN. The shape selective properties of the frameworks of these three materials have been tested using four different types of force fields commonly used based on united atom, rigid-ion and core-shell approximations. The performance of each force field is analysed in order to find which force fields can give sufficiently accurate estimations that allow to select appropriate zeolites for selective separation of para/ortho xylene. This performance was found to depend on the quality of the structural properties of the zeolite, in particular the size and shape of the 10 rings which act as bottlenecks for the diffusion. The computational results allow us to define some optimum characteristics for the selective diffusion of p-xylene.     

Chromium is not an essential trace element for mammals: effects of a “low-chromium�?diet

Chromium was proposed to be an essential trace element over 50?years ago and has been accepted as an essential element for over 30?years. However, the studies on which chromium’s status are based are methodologically flawed. Whether chromium is an essential element has been examined for the first time in carefully controlled metal-free conditions using a series of purified diets containing various chromium contents. Male Zucker lean rats were housed in specially designed metal-free cages for 6?months and fed the AIN-93G diet with no added chromium in the mineral mix component of the diet, the standard AIN-93G diet, the standard AIN-93G diet supplemented with 200?μg?Cr/kg, or the standard AIN-93G diet supplemented with 1,000?μg?Cr/kg. The chromium content of the diet had no effect on body mass or food intake. Similarly, the chromium content of the diet had no effect on glucose levels in glucose tolerance or insulin tolerance tests. However, a distinct trend toward lower insulin levels under the curve after a glucose challenge was observed with increasing chromium content in the diet; rats on the supplemented AIN-93G diets had significantly lower areas (P?<?0.05) than rats on the low-chromium diet. The studies reveal that a diet with as little chromium as reasonably possible had no effect on body composition, glucose metabolism, or insulin sensitivity compared with a chromium-“sufficient??diet. Together with the results of other recent studies, these results clearly indicate that chromium can no longer be considered an essential element.     

Ethanesulfonic acid-based esterification of industrial acidic crude palm oil for biodiesel production

An industrial grade acidic crude palm oil (ACPO) pre-treatment process was carried out using ethanesulfonic acid (ESA) as a catalyst in the esterification reaction. ESA was used in different dosages to reduce free fatty acid (FFA) to a minimum level for the second stage of biodiesel production via alkaline transesterification reaction. Different process operating conditions were optimized such as ESA dosage (0.25-3.5% wt/wt), methanol to ACPO molar ratio (1:1-20:1), reaction temperature (40-70 °C), and reaction time (3-150 min). This study revealed the potential use of abundant quantities of ACPO from oil palm mills for biodiesel production. The lab scale results showed the effectiveness of the pre-treatment process using ESA catalyst. Three consecutive catalyst recycling runs were achieved without significant degradation in its performance. Second and third reuse runs needed more reaction time to achieve the target level of FFA content. Esterification and transesterification using ESA and KOH respectively is proposed for biodiesel industrial scale production. The produced biodiesel meets the international standards specifications for biodiesel fuel (EN 14214 and ASTM D6751).     

Optimization of methods for peripheral blood mononuclear cells isolation and expansion of human gamma delta T cells

Human Vg9/Vδ2 T cells (γδ T cells) are immune surveillance cells both in innate and adaptive immunity and are a possible target for anticancer therapies, which can induce immune responses in a variety of cancers. Small non-peptide antigens such as zoledronate can do activation and expansion of T cells in vitro. It is evident that for adoptive cancer therapies, large numbers of functional cells are needed into cancer patients. Hence, optimization of methods needs to be carried out for the efficient expansion of these T cells. Standardization of peripheral blood mononuclear cells (PBMCs) isolation was devised. Cytokines (interleukin 2 (IL-2) and interleukin 15 (IL-15)) and zoledronate were also standardized for different concentrations. It was found that an increased number of PBMCs were recovered when washing was done at 1100 revolution per minute (rpm). Significantly high expansion fold was (2524 ± 787 expansion fold) achieved when stimulation of PBMCs was done with 1 µM of zoledronate and both cytokines IL-2 and IL-15 supported the expansion and survival of cells at the concentrations of 100 IU/ml and 10 ng/ml respectively. 14-day cultures showed highly pure (91.6 ± 5.1%) and live (96.5 ± 2.5%) expanded γδ T cells. This study aimed to standardize an easy to manipulate technique for the expansion of γδ T cells, giving a higher yield.     

Feasibility of oleaginous fungi isolated from soil samples of Saudi Arabia for mycodiesel production

As the demand for biofuels for transportation is increasing, it is necessary to acquire technologies that will allow affordable production of biodiesel. Conventional biodiesel is mainly produced from vegetable oil by chemical transesterification, but this product has relatively low yield and is competing with agricultural land that can be used for food production. In the present study, 14 filamentous fungi were isolated from different types of soil from Al-Hassa, Saudi Arabia. Nile red staining revealed that lipid bodies were present in 6 of the 14 fungal isolates. Lipid extraction showed that 3 fungi were able to accumulate lipid >20% (wt/wt) of their dry cell mass (0.59–2.40 g/L). The profile of fatty acids revealed a high content of oleic (C18:1, n9), palmitic (C16:0) and linoleic (C18:2) acids similar to conventional vegetable oils used for biodiesel production. Isolate RY4, with the highest lipid yield was identified as Mucor circinelloides based on morphological characteristics confirmed with 18S rRNA gene sequencing. Sequence data of nucleotides were obtained from DNA sequencing submitted to GenBank [GenBank: AB916546.1]. Certain oil compounds were determined by FTIR spectroscopy.