The Crystal Structure of L-Leucine Dehydrogenase from Pseudomonas aeruginosa

Leucine dehydrogenase (LDH, EC 1.4.1.9) catalyzes the reversible deamination of branched-chain L-amino acids to their corresponding keto acids using NAD⁺ as a cofactor. LDH generally adopts an octameric structure with D4 symmetry, generating a molecular mass of approximately 400 kDa. Here, the crystal structure of the LDH from Pseudomonas aeruginosa (Pa-LDH) was determined at 2.5 _Å resolution. Interestingly, the crystal structure shows that the enzyme exists as a dimer with C2 symmetry in a crystal lattice. The dimeric structure was also observed in solution using multiangle light scattering coupled with size-exclusion chromatography. The enzyme assay revealed that the specific activity was maximal at 60°C and pH 8.5. The kinetic parameters for three different amino acid and the cofactor (NAD⁺) were determined. The crystal structure represents that the subunit has more compact structure than homologs’ structure. In addition, the crystal structure along with sequence alignments indicates a set of non-conserved arginine residues which are important in stability. Subsequent mutation analysis for those residues revealed that the enzyme activity reduced to one third of the wild type. These results provide structural and biochemical insights for its future studies on its application for industrial purposes.     

Genetic divergence of Platycerus hongwonpyoi (Coleoptera: Lucanidae) in South Korea

We examined the genetic divergence of Platycerus hongwonpyoi Imura & Choe, 1989 in South Korea using the nuclear wingless (Wg) gene, internal transcribed spacer (ITS) region and mitochondrial cytochrome oxidase subunit I (COI) gene. We found no variation in Wg or ITS. Based on COI, P. hongwonpyoi was split into four well defined and one weakly supported clades, which were inferred to have diverged 2.11–1.33 Ma. The Platycerus hongwonpyoi population size seems to have decreased during the past several tens of thousands of years. The divergence times of major clades of P. hongwonpyoi were comparable with those involved in the speciation of certain Japanese species. Frequent overlapping of different clades at the same sites suggests the occurrence of secondary gene flow following differentiation in South Korea. In conclusion, the genus Platycerus underwent strikingly different divergence patterns in South Korea compared with Japan according to the disparate topographies of these two geographical areas.     

Visceral fat is an independent predictor of all-cause mortality in men

Objective: To examine the independent associations of abdominal fat (visceral and subcutaneous) and liver fat with all‐cause mortality. Research Methods and Procedures: Participants included 291 men [97 decedents and 194 controls; mean age, 56.4 ± 12.0 (SD) years] who received a computed tomography (CT) examination at the preventive medicine clinic in Dallas, TX, between 1995 and 1999, with a mean mortality follow‐up of 2.2 ± 1.3 years. Abdominal fat was determined using contiguous CT images from the L3‐L4 to L4‐L5 intervertebral space. Liver fat was assessed using the CT‐determined liver attenuation value, which is inversely related to liver fat. Logistic regression was used to determine the independent association between the fat depots and all‐cause mortality. Results: During the study, there were 97 deaths. Visceral fat [odds ratio (OR) per SD: 1.83; 95% CI: 1.23 to 2.73], abdominal subcutaneous fat (1.44; 1.02 to 2.03), liver fat (0.64; 0.46 to 0.87), and waist circumference (1.41; 1.01 to 1.98) were significant individual predictors of mortality after controlling for age and length of follow‐up. In a model including all three fat measures (subcutaneous, visceral, and liver fat), age, and length of follow‐up, only visceral fat (1.93; 1.15 to 3.23) was a significant predictor of mortality. Discussion: Visceral fat is a strong, independent predictor of all‐cause mortality in men.     

Expression, purification, and antibody binding activity of human papillomavirus 16 L1 protein fused to maltose binding protein

Genetic human papillomavirus type 16 L1 (HPV16 L1) has been widely studied for cervical cancer vaccine development. For the enzyme-linked immunosorbent assay (ELISA) screening of these vaccines, HPV16 L1 protein, which is required as a coating protein, has previously been expressed from costly and laborious recombinant baculovirus-infected insect cells. For a novel HPV16 L1 expression system characterized by a high yield of soluble form with simple purification steps, we have cloned and expressed two different types of HPV16 L1, both fused to maltose binding protein (MBP) or glutathione-S-transferase (GST) in Escherichia coli. The yield of soluble HPV16 L1 was influenced by the cultivation temperature. The yield of soluble form in the total MBP-fused HPV16 L1 protein (MBP-HPV16 L1) was 35% at 37 degrees C, but increased to 85% at 22 degrees C. Among the fusion partners, MBP provided higher yields of total and soluble HPV16 L1 than did GST. MBP-HPV16 L1 showed a 4.9-fold higher yield of the soluble form over insoluble inclusion bodies under optimized culture conditions. The soluble form of MBP-HPV16 L1 was purified via MBP affinity chromatography in a recovery yield of 9.7%. After fusion with MBP, HPV16 L1 showed binding activity to HPV16 L1-specific monoclonal antibody comparable to HPV16 L1 from the insect cells in ELISA tests. These results demonstrate that the use of MBP as a fusion partner may generate a high yield of soluble HPV16 L1 under optimized temperature conditions, and that MBP-fused HPV16 L1 might be applied further in evaluations of the immune responses of HPV16 L1-based cervical cancer vaccines.     

Effect of maternal restraint stress on fetal development of ICR mice.

The present study was conducted to elucidate the susceptibility of embryos and fetuses at different gestational stages to the maternal stress in mice. Groups of pregnant ICR mice were subjected to daily 12-h restraint stress, taped in the supine position on a plastic board, on gestational days (GD) 1-4, 5-8, 9-12 and 13-16, respectively. Caesarean sections were performed on gestational day 18, and the fetuses were weighed and examined for morphological defects. During the daily restraint for 4 days, the maternal body weights markedly decreased. Although the body weights recovered gradually after termination of the stress, the recovery was not full until the final stage of pregnancy. Interestingly, restraint stress caused growth retardation of the fetuses, leading to a significant decrease in their body weights, and increased early and late resorptions of embryos and fetuses according to the stress periods. Although the preceding (GD1-4) and concurrent (GD5-8) stresses did not affect embryonic implantation, restraint stress on GD9-12 caused cleft palate. Whereas vertebral abnormalities, mainly bipartite ossification, were observed only in animals stressed on GD5-8, abnormalities of sternebrae, exhibiting asymmetric or bipartite ossification, were enhanced by the stress at all of the gestational stages. On the other hand, the incidence of other malformations including renal malposition and costal abnormalities was not increased by stress at any of the 4 stages. Taken together, the results suggest that intensive restraint stress influences the maternal body weight resulting in growth retardation and increased mortality of embryos and fetuses, in addition to gestational stage-specific ventricular dilatation, cleft palate and sternal abnormalities.     

High Temperature Stress Resistance of Escherichia coli Induced by a Tobacco Class I Low Molecular Weight Heat-Shock Protein

TLHS1 is a class I low molecular weight heat-shock protein (LMW HSP) of tobacco (Nicotiana tabacum). For a functional study of TLHS1, a recombinant DNA coding for TLHS1 with a hexahistidine tag at the aminoterminus was constructed and expressed in Escherichia coli. An expressed fusion protein, H₆TLHS1, was purified using a Ni²⁺ affinity column and a Sephacryl S400 HR column. A polyclonal antibody against H₆TLHS1 was produced to follow the fate of H₆TLHS1 in E. coli. The fusion protein in E. coli maintained its solubility at a temperature of up to 90°C and most of the proteins in the E. coli cell lysate with H₆TLHS1 were prevented from thermally induced aggregation at up to 90°C. We compared the viability of E. coli cells expressing H₆TLHS1 to the E. coli cells without H₆TLHS1 at a temperature of 50°C. After 8 h of high temperature treatment, E. coli cells with H₆TLHS1 survived about three thousand times more than the bacterial cells without H₆TLHS1. These results showed that a plant class I LMW HSP, TLHS1, can protect proteins of E. coli from heat denaturation, which could lead to a higher survival rate of the bacterial cells at high temperature.     

Autophagy Is Involved in the Reduction of Myelinating Schwann Cell Cytoplasm during Myelin Maturation of the Peripheral Nerve

Peripheral nerve myelination involves dynamic changes in Schwann cell morphology and membrane structure. Recent studies have demonstrated that autophagy regulates organelle biogenesis and plasma membrane dynamics. In the present study, we investigated the role of autophagy in the development and differentiation of myelinating Schwann cells during sciatic nerve myelination. Electron microscopy and biochemical assays have shown that Schwann cells remove excess cytoplasmic organelles during myelination through macroautophagy. Inhibition of autophagy via Schwann cell-specific removal of ATG7, an essential molecule for macroautophagy, using a conditional knockout strategy, resulted in abnormally enlarged abaxonal cytoplasm in myelinating Schwann cells that contained a large number of ribosomes and an atypically expanded endoplasmic reticulum. Small fiber hypermyelination and minor anomalous peripheral nerve functions are observed in this mutant. Rapamycin-induced suppression of mTOR activity during the early postnatal period enhanced not only autophagy but also developmental reduction of myelinating Schwann cells cytoplasm in vivo. Together, our findings suggest that autophagy is a regulatory mechanism of Schwann cells structural plasticity during myelination.     

Urinary Biomarkers of Polycyclic Aromatic Hydrocarbons Are Associated with Cardiometabolic Health Risk

Background

Polycyclic aromatic hydrocarbons (PAH) are both man-made and naturally occurring environmental pollutants that may be related to cardiometabolic health risk.

Objective

To determine whether PAH is associated with obesity in the adult population and to examine whether urinary concentrations of PAH metabolites are associated with differences in how obesity relates to 3 or more risk factors for the metabolic syndrome (3RFMetS), type 2 diabetes (T2D), hypertension, and dyslipidemia.

Methods

A total of 4765 adult participants from the 2001–2008 National Health and Nutrition Examination Survey were examined. The association between 8 urinary hydroxylated PAH metabolites, obesity, and health were examined using weighted logistic regressions adjusting for age, sex, ethnicity, PIR, smoking status, and urinary creatinine.

Results

There was a positive dose-dependent association between obesity and 2-phenanthrene quintiles (P trend <0.0001). Contrarily, higher quintiles of 1-naphthalene were associated with lower risk of obesity (P trend = 0.0004). For a given BMI, those in the highest quintile of 2-naphthalene, 2-fluorene, 3-fluorene and 2-phenanthrene had a 66–80% greater likelihood of 3RFMetS (P≤0.05) compared to low levels. Higher quintiles of 1-naphthalene, 2-naphthalene, 2-phenanthrene and 1-pyrene were associated with a 78–124% greater likelihood of T2D (P≤0.05) compared to low levels while high 1-naphthalene, 2-naphthalene, 2-fluorene, 3-fluorene and 2-phenanthrene were associated with a 38–68% greater likelihood of dyslipidemia (P≤0.05) compared to lower levels. Finally, 2-naphthalene and 2-phenanthrene were positively associated with hypertension (P trend = 0.008 and P trend = 0.02 respectively).

Conclusions

PAH is related to obesity and the expression of a number of obesity-related cardiometabolic health risk factors. Future research is needed to bring to light the mechanistic pathways related to these findings.     

Synthetic biology for biofuels: Building designer microbes from the scratch

The ultimate goal in the production of biofuels is to produce fuels identical or similar to petroleum-derived transportation fuels more efficiently and in commercial quantities. Synthetic biologists have been engineering microbes to synthesize biofuels, such as butanol and fatty acid- or isoprenoid-based fuels, which are nearly identical to gasoline and diesel. One of the most urgent demands along this direction is to attain a solid framework for characterizing and standardizing the biological parts and devices. It seems quite promising because biotechnologies specially based on miniaturizations have been making a big contribution to this work. Therefore, in this review, recent advances and difficulties in the biofuel field are discussed, along with the advances of synthetic biology, which will make it possible to create designer microorganisms that produce economically viable next generation biofuels, aside from bioethanol, from corn or sugar cane, and biodiesel from plant or animal oils.