Identification of a nuclear localization signal in activin/inhibin betaA subunit; intranuclear betaA in rat spermatogenic cells

Activin is a dimeric glycoprotein hormone that was initially characterized by its ability to stimulate pituitary FSH secretion and was subsequently recognized as a growth factor with diverse biological functions in a large variety of tissues. In the testis, activin has been implicated in the auto/paracrine regulation of spermatogenesis through its cognate cell membrane receptors on Sertoli and germ cells. In this study we provide evidence for intranuclear activin/inhibin betaA subunit and show its distribution in the rat seminiferous epithelium. We have shown by transient expression in HeLa cells of beta-galactosidase fusion proteins that the betaA subunit precursor contains a functional nuclear localization signal within the lysine-rich sequence corresponding to amino acids 231-244. In all stages of the rat seminiferous epithelial cycle, an intense immunohistochemical staining of nuclear betaA was demonstrated in intermediate or type B spermatogonia or primary spermatocytes in their initial stages of the first meiotic prophase, as well as in pachytene spermatocytes and elongating spermatids primarily in stages IX-XII. In some pachytene spermatocytes, the pattern of betaA immunoreactivity was consistent with the characteristic distribution of pachytene chromosomes. In the nuclei of round spermatids, betaA immunoreactivity was less intense, and in late spermatids it was localized in the residual cytoplasm, suggesting disposal of betaA before spermatozoal maturation. Immunoblot analysis of a protein extract from isolated testicular nuclei revealed a nuclear betaA species with a molecular mass of approximately 24 kDa, which is more than 1.5 times that of the mature activin betaA subunit present in activin dimers. These results suggest that activin/inhibin betaA may elicit its biological functions through two parallel signal transduction pathways, one involving the dimeric molecule and cell surface receptors and the other an alternately processed betaA sequence acting directly within the nucleus. According to our immunohistochemical data, betaA may play a significant role in the regulation of nuclear functions during meiosis and spermiogenesis.     

Molecular movement of the voltage sensor in a K channel

The X-ray crystallographic structure of KvAP, a voltage-gated bacterial K channel, was recently published. However, the position and the molecular movement of the voltage sensor, S4, are still controversial. For example, in the crystallographic structure, S4 is located far away (>30 A) from the pore domain, whereas electrostatic experiments have suggested that S4 is located close (<8 A) to the pore domain in open channels. To test the proposed location and motion of S4 relative to the pore domain, we induced disulphide bonds between pairs of introduced cysteines: one in S4 and one in the pore domain. Several residues in S4 formed a state-dependent disulphide bond with a residue in the pore domain. Our data suggest that S4 is located close to the pore domain in a neighboring subunit. Our data also place constraints on possible models for S4 movement and are not compatible with a recently proposed KvAP model.     

Quantitative detection of cell surface protein expression by time-resolved fluorimetry.

A method is introduced for quantitative detection of cell surface protein expression. The method is based on immunocytochemistry, the use of long decay time europium(III) chelate and platinum(II) porphyrin labels, and detection of photoluminescence emission from adhered cells by time-resolved fluorimetry. After immunocytochemistry, the assay wells are evaporated to dryness and measured in the dry state. This protocol allows repeated and postponed analysis and microscopy imaging. In order to investigate the performance of the method, we chose expression of intercellular adhesion molecule-1 (ICAM-1) of endothelial cell line EAhy926 as a research target. The expression of ICAM-1 on the cells was enhanced by introduction of a cytokine, tumour necrosis factor-alpha (TNFalpha). The method gave signal:background ratios (S:B) of 20 and 9 for europium and platinum labels, respectively, whereas prompt fluorescent FITC label gave a S:B of 3. Screening window coefficients (=Z'-factor) were >0.5 for all the three labels, thus indicating a score for an excellent screening assay. In conclusion, the method appears to be an appropriate choice for protein expression analysis, both in high-throughput screening applications, and for detailed sample investigation by fluorescent microscopy imaging.     

Single-label time-resolved luminescence assay for estrogen receptor--ligand binding

Homogeneous luminescence-based microplate assays are desirable in high-throughput screening of new nuclear receptor regulators. Time-resolved fluorescence resonance energy transfer (TR–FRET) assays provide high sensitivity due to low background signal. The TR–FRET concept requires labeling of both ligand and receptor, making the assay format and its development relatively expensive and complex compared with single-label methods. To overcome the limitations of the multilabel methods, we have developed a single-label method for estrogen receptor (ER)–ligand binding based on quenching resonance energy transfer (QRET), where estradiol labeled with luminescent europium(III) chelate (Eu–E₂) is quenched using soluble quencher molecules. The luminescence signal of Eu–E₂ on binding to full-length ER is protected from quenching while increasing competitor concentrations displace Eu–E₂ from the receptor, reducing the signal. The QRET method was paralleled with a commercial fluorescence polarization (FP) assay. The measured signal-to-background (S/B) values for estradiol, estrone, fulvestrant, and tamoxifen obtained for the QRET assay (5.8–9.2) were clearly higher than the S/B values for the FP assay (1.3–1.5). A K_d value of 30 nM was calculated for binding of Eu–E₂ to ER from a saturation binding isotherm. The QRET method provides an attractive new single-label assay format for nuclear receptor ligand screening.     

Hysteresis in the voltage dependence of HCN channels: conversion between two modes affects pacemaker properties

Hyperpolarization-activated, cyclic nucleotide-gated (HCN) ion channels are important for rhythmic activity in the brain and in the heart. In this study, using ionic and gating current measurements, we show that cloned spHCN channels undergo a hysteresis in their voltage dependence during normal gating. For example, both the gating charge versus voltage curve, Q(V), and the conductance versus voltage curve, G(V), are shifted by about +60 mV when measured from a hyperpolarized holding potential compared with a depolarized holding potential. In addition, the kinetics of the tail current and the activation current change in parallel to the voltage shifts of the Q(V) and G(V) curves. Mammalian HCN1 channels display similar effects in their ionic currents, suggesting that the mammalian HCN channels also undergo voltage hysteresis. We propose a model in which HCN channels transit between two modes. The voltage dependence in the two modes is shifted relative to each other, and the occupancy of the two modes depends on the previous activation of the channel. The shifts in the voltage dependence are fast (tau approximately 100 ms) and are not accompanied by any apparent inactivation. In HCN1 channels, the shift in voltage dependence is slower in a 100 mM K extracellular solution compared with a 1 mM K solution. Based on these findings, we suggest that molecular conformations similar to slow (C-type) inactivation of K channels underlie voltage hysteresis in HCN channels. The voltage hysteresis results in HCN channels displaying different voltage dependences during different phases in the pacemaker cycle. Computer simulations suggest that voltage hysteresis in HCN channels decreases the risk of arrhythmia in pacemaker cells.     

Signaling pathways in human osteoclasts differentiation: ERK1/2 as a key player

Molecular Biology Reports - Little is known about the signaling pathways involved in the differentiation of human osteoclasts. The present study evaluated the roles of the Ras/PI3K/Akt/mTOR,...     

Two-photon excitation in fluorescence polarization receptor-ligand binding assay

Fluorescence polarization is one of the most commonly used homogeneous assay principles in drug discovery for screening of potential lead compounds. In this article, the fluorescence polarization technique is combined with 2-photon excitation of fluorescence. Theoretically, the use of 2-photon excitation of fluorescence increases the volumetric sensitivity and polarization contrast of fluorescence polarization assays. The work in this report demonstrates these predictions for an estrogen receptor ligand binding assay.     

Use of Symbiosis Products from Integrated Pulp and Paper and Carbon Steel Mills: Legal Status and Environmental Burdens

This study assesses the policy/legal status of both multistream residues and potential secondary products (“symbiosis products”) and whether there could be environmental benefits associated with the utilization of residues from integrated pulp and paper and carbon steel mills as raw materials for such secondary products. Waste‐related European Union (EU) and Finnish policy and legal instruments were reviewed to identify potential constraints for, and suggested next steps in, the development of potential process industry residue‐based symbiosis products. The products were soil amendment pellets, low‐grade concrete, and mine filler. A global warming potential (GWP) assessment and an exergy analysis were applied to these potential symbiosis products. Some indicative GWP calculations of greenhouse gas emissions associating similar and/or analogous products based on virgin primary raw materials, more energy‐intensive processes, and the alternative treatment of these residues as wastes are also presented. This study addresses GWP, exergy, and legal aspects in a holistic manner to determine the potential environmental benefits of secondary products within the EU legal framework. The GWP assessment and exergy analysis indicate that the utilization of multistream residues causes very low environmental burdens in terms of GWP. The utilization option can have potential environmental benefits in terms of GWP through process replacement and avoided landfilling and waste treatment impacts, as well as potentially through emission reductions from product replacement if suitable and safe applications can be identified. Waste regulation does not define the legal requirements under which utilizing residues in such novel concepts as introduced in this study would be possible, nor how waste status could be removed and product‐based legislation be applied to the potential products instead.     

S4 charges move close to residues in the pore domain during activation in a K channel.

Voltage-gated ion channels respond to changes in the transmembrane voltage by opening or closing their ion conducting pore. The positively charged fourth transmembrane segment (S4) has been identified as the main voltage sensor, but the mechanisms of coupling between the voltage sensor and the gates are still unknown. Obtaining information about the location and the exact motion of S4 is an important step toward an understanding of these coupling mechanisms. In previous studies we have shown that the extracellular end of S4 is located close to segment 5 (S5). The purpose of the present study is to estimate the location of S4 charges in both resting and activated states. We measured the modification rates by differently charged methanethiosulfonate regents of two residues in the extracellular end of S5 in the Shaker K channel (418C and 419C). When S4 moves to its activated state, the modification rate by the negatively charged sodium (2-sulfonatoethyl) methanethiosulfonate (MTSES(-)) increases significantly more than the modification rate by the positively charged [2-(trimethylammonium)ethyl] methanethiosulfonate, bromide (MTSET(+)). This indicates that the positive S4 charges are moving close to 418C and 419C in S5 during activation. Neutralization of the most external charge of S4 (R362), shows that R362 in its activated state electrostatically affects the environment at 418C by 19 mV. In contrast, R362 in its resting state has no effect on 418C. This suggests that, during activation of the channel, R362 moves from a position far away (>20 A) to a position close (8 A) to 418C. Despite its close approach to E418, a residue shown to be important in slow inactivation, R362 has no effect on slow inactivation or the recovery from slow inactivation. This refutes previous models for slow inactivation with an electrostatic S4-to-gate coupling. Instead, we propose a model with an allosteric mechanism for the S4-to-gate coupling.