High frequency of plant regeneration from hypocotyl explants of Brassica carinata A. Br.

An efficient tissue culture system for high frequency of plant regeneration from hypocotyl explants of Brassica carinata was developed via manipulation of culture medium and selection of explants. Explants grown on medium containing combinations of 2 mg l^-1 BA and 0.01 mg l^-1 NAA or 4 mg l^-1 kinetin and 0.01 mg l^-1 2,4-D regenerated shoots at 100% frequency. High frequency shoot regeneration occurred only from explants originating from 6 to 7-day-old but not younger or older seedlings. Explants showed higher regeneration capacity at the distal end than the proximal end, and the upper segment was more regenerative than the lower segment of hypocotyl. Regenerants were rooted on half-strength growth regulator-free medium, acclimatized and developed into normal, fertile plants.Abbreviations BA benzyladenine - 2-4-D 2,4-dichlorophenoxyacetic acid - NAA naphthaleneacetic acid - MS Murashige & Skoog     

Stringency of the 2-His–1-Asp Active-Site Motif in Prolyl 4-Hydroxylase

The non-heme iron(II) dioxygenase family of enzymes contain a common 2-His–1-carboxylate iron-binding motif. These enzymes catalyze a wide variety of oxidative reactions, such as the hydroxylation of aliphatic C–H bonds. Prolyl 4-hydroxylase (P4H) is an α-ketoglutarate-dependent iron(II) dioxygenase that catalyzes the post-translational hydroxylation of proline residues in protocollagen strands, stabilizing the ensuing triple helix. Human P4H residues His412, Asp414, and His483 have been identified as an iron-coordinating 2-His–1-carboxylate motif. Enzymes that catalyze oxidative halogenation do so by a mechanism similar to that of P4H. These halogenases retain the active-site histidine residues, but the carboxylate ligand is replaced with a halide ion. We replaced Asp414 of P4H with alanine (to mimic the active site of a halogenase) and with glycine. These substitutions do not, however, convert P4H into a halogenase. Moreover, the hydroxylase activity of D414A P4H cannot be rescued with small molecules. In addition, rearranging the two His and one Asp residues in the active site eliminates hydroxylase activity. Our results demonstrate a high stringency for the iron-binding residues in the P4H active site. We conclude that P4H, which catalyzes an especially demanding chemical transformation, is recalcitrant to change.     

Alteration of surfactant protein A expression in renal cell carcinoma

Surfactant protein-A (SP-A) belongs to a family of collagen-containing C-type lectins called collectins. SP-A is expressed by renal tubule epithelial cells. We investigated the distribution of SP-A in renal cell carcinomas (RCC) using immunohistochemical techniques and western blotting. We used 35 formalin fixed, paraffin embedded (FFPE) RCC tissue samples. We compared results with clinico-pathological parameters of RCC including age, sex, Fuhrman grade, tumor volume, tumor node metastasis (TNM) and clinical stage. SP-A was localized in the glomerulus and renal tubule epithelium in nontumor tissue and strong SP-A immunoreactivity was observed in tumor tissue. SP-A was expressed in the RCC tumor cells (64%) and nontumor cells (34%) in males and RCC tumor cells (90%) and nontumor cells (30%) in females. There was a significant correlation between SP-A immunoreactivity in tumor cells and gender, age, tumor diameter, Fuhrman grade and tumor diameter. Western blot analysis supported the immunohistochemical findings. We present evidence for involvement of SP-A in RCC and suggest that increased SP-A expression in RCC is associated with favorable prognosis.     

Concurrent validity of the Microsoft Kinect for assessment of spatiotemporal gait variables

Spatiotemporal characteristics of gait such as step time and length are often associated with overall physical function in clinical populations, but can be difficult, time consuming and obtrusive to measure. This study assessed the concurrent validity of overground walking spatiotemporal data recorded using a criterion reference – a marker-based three-dimensional motion analysis (3DMA) system – and a low-cost, markerless alternative, the automated skeleton tracking output from the Microsoft Kinect™ (Kinect). Twenty-one healthy adults performed normal walking trials while being monitored using both systems. The outcome measures of gait speed, step length and time, stride length and time and peak foot swing velocity were derived using supervised automated analysis. To assess the agreement between the Kinect and 3DMA devices, Bland–Altman 95% bias and limits of agreement, percentage error, relative agreement (Pearson's correlation coefficients: r) overall agreement (concordance correlation coefficients: r_c) and landmark location linearity as a function of distance from the sensor were determined. Gait speed, step length and stride length from the two devices possessed excellent agreement (r and r_c values >0.90). Foot swing velocity possessed excellent relative (r=0.93) but only modest overall (r_c=0.54) agreement. Step time (r=0.82 and r_c=0.23) and stride time (r=0.69 and r_c=0.14) possessed excellent and modest relative agreement respectively but poor overall agreement. Landmark location linearity was excellent (R²=0.991). This widely available, low-cost and portable system could provide clinicians with significant advantages for assessing some spatiotemporal gait parameters. However, caution must be taken when choosing outcome variables as some commonly reported variables cannot be accurately measured.     

三氧化二砷对食管癌细胞增殖和热休克蛋白70表达的影响

目的：研究三氧化二砷（As2O3）对食管癌细胞增殖和热休克蛋白70（HSP70）表达的影响。方法：通过相差显微镜、流式细胞术、免疫细胞化学染色和免疫印迹分析等方法观察As2O3对人食管癌细胞株EC1的作用效果和作用机制。结果：与对照组相比,经2μmol/L和5μmol/Las2O3作用的细胞出现明显的生长抑制,G2/M期细胞比例增加;2μmol/Las2O3作用48h后经Ecl细胞HSP70（heat shock protein70）及HSC70(heat shock cognate protein70)表达均增加。结论：As2O3诱导食管癌细胞G2/M期阻滞抑制细胞增殖和生长;HSP70的升高是细胞对As2O3作用后出现的应激反应,并与细胞周期阻滞相关。     

Assessment of Lower Limb Muscle Strength and Power Using Hand-Held and Fixed Dynamometry: A Reliability and Validity Study

Introduction

Hand-held dynamometry (HHD) has never previously been used to examine isometric muscle power. Rate of force development (RFD) is often used for muscle power assessment, however no consensus currently exists on the most appropriate method of calculation. The aim of this study was to examine the reliability of different algorithms for RFD calculation and to examine the intra-rater, inter-rater, and inter-device reliability of HHD as well as the concurrent validity of HHD for the assessment of isometric lower limb muscle strength and power.

Methods

30 healthy young adults (age: 23±5yrs, male: 15) were assessed on two sessions. Isometric muscle strength and power were measured using peak force and RFD respectively using two HHDs (Lafayette Model-01165 and Hoggan microFET2) and a criterion-reference KinCom dynamometer. Statistical analysis of reliability and validity comprised intraclass correlation coefficients (ICC), Pearson correlations, concordance correlations, standard error of measurement, and minimal detectable change.

Results

Comparison of RFD methods revealed that a peak 200ms moving window algorithm provided optimal reliability results. Intra-rater, inter-rater, and inter-device reliability analysis of peak force and RFD revealed mostly good to excellent reliability (coefficients ≥ 0.70) for all muscle groups. Concurrent validity analysis showed moderate to excellent relationships between HHD and fixed dynamometry for the hip and knee (ICCs ≥ 0.70) for both peak force and RFD, with mostly poor to good results shown for the ankle muscles (ICCs = 0.31–0.79).

Conclusions

Hand-held dynamometry has good to excellent reliability and validity for most measures of isometric lower limb strength and power in a healthy population, particularly for proximal muscle groups. To aid implementation we have created freely available software to extract these variables from data stored on the Lafayette device. Future research should examine the reliability and validity of these variables in clinical populations.     

Effect of unilateral and bilateral resistance exercise on maximal voluntary strength,total volume of load lifted,and perceptual and metabolic responses

The present study investigated the effect of unilateral and bilateral resistance exercise (RE) on maximal voluntary strength, total volume of load lifted (TVLL), rating of perceived exertion (RPE) and blood lactate concentration of resistance-trained males. Twelve healthy men were assessed for the leg extension one-repetition maximum (1RM) strength using bilateral and unilateral contractions. Following this assessment, an RE session (3 sets of repetitions to failure) was conducted with bilateral and unilateral (both limbs) contractions using a load of 50% 1RM. The TVLL was calculated by the product of the number of repetitions and the load lifted per repetition. RPE and blood lactate were measured before, during and after each set. Session RPE was measured 30 minutes after RE sessions. There was a significant difference in the bilateral (120.0±11.9) and unilateral (135.0±20.2 kg) 1RM strength (p < 0.05). The TVLL was similar between both RE sessions. Although the repetitions decreased with each successive set, the total number of repetitions completed in the bilateral protocol (48) was superior to the unilateral (40) protocol (p < 0.05). In both bouts, RPE increased with each subsequent set whilst blood lactate increased after set 1 and thereafter remained stable (p < 0.05). The RPE and lactate responses were not significantly different between both sessions. In conclusion, a bilateral deficit in leg extension strength was confirmed, but the TVLL was similar between both RE sessions when exercising to voluntary fatigue. This outcome could be attributed to the number of repetitions completed in the unilateral RE bout. The equal TVLL would also explain the similar perceptual and metabolic responses across each RE session.     

Comparative studies of products obtained from solvolysis liquefaction of oil palm empty fruit bunch fibres using different solvents

Solvolysis of oil palm empty fruit bunches (EFB) fibres using different solvents (acetone, ethylene glycol (EG), ethanol, water and toluene) were carried out using an autoclave at 275°C for 60 min. The solvent efficiency in term of conversion yield was found to be: EG>water>ethanol>acetone>toluene. The liquid products and residue obtained were analyzed using Fourier transform infrared spectroscopy (FTIR) and gas chromatography/mass selectivity. The obtained results showed that the chemical properties of the oil product were significantly affected by the type of solvent used for the solvolysis process. The higher heating value (HHV) of oil products obtained using ethanol is ～29.42 MJ/kg, which is the highest among the oil products produced using different solvents. Water, ethanol and toluene yield major phenolic compounds. While EG favors the formation of alcohol compounds and acetone yields ketone and aldehyde compounds.