Phantom design and dosimetric characterization for multiple simultaneous cell irradiations with active pencil beam scanning

A new phantom was designed for in vitro studies on cell lines in horizontal particle beams. The phantom enables simultaneous irradiation at multiple positions along the beam path. The main purpose of this study was the detailed dosimetric characterization of the phantom which consists of various heterogeneous structures. The dosimetric measurements described here were performed under non-reference conditions. The experiment involved a CT scan of the phantom, dose calculations performed with the treatment planning system (TPS) RayStation employing both the Pencil Beam (PB) and Monte Carlo (MC) algorithms, and proton beam delivery. Two treatment plans reflecting the typical target location for head and neck cancer and prostate cancer treatment were created. Absorbed dose to water and dose homogeneity were experimentally assessed within the phantom along the Bragg curve with ionization chambers (ICs) and EBT3 films. LET_d distributions were obtained from the TPS. Measured depth dose distributions were in good agreement with the Monte Carlo-based TPS data. Absorbed dose calculated with the PB algorithm was 4% higher than the absorbed dose measured with ICs at the deepest measurement point along the spread-out Bragg peak. Results of experiments using melanoma (SKMel) cell line are also presented. The study suggested a pronounced correlation between the relative biological effectiveness (RBE) and LET_d, where higher LET_d leads to elevated cell death and cell inactivation. Obtained RBE values ranged from 1.4 to 1.8 at the survival level of 10% (RBE₁₀). It is concluded that dosimetric characterization of a phantom before its use for RBE experiments is essential, since a high dosimetric accuracy contributes to reliable RBE data and allows for a clearer differentiation between physical and biological uncertainties.

     

Cascade synthesis of chiral block copolymers combining lipase catalyzed ring opening polymerization and atom transfer radical polymerization

The enantioselective polymerization of methyl-substituted epsilon-caprolactones using Novozym 435 as the catalyst was investigated. All substituted monomers could be polymerized except 6-methyl-epsilon-caprolactone (6-MeCL), which failed to propagate after ring opening. Interestingly, an odd-even effect in the enantiopreference of differently substituted monomers was observed. The combination of 4-methyl-epsilon-caprolactone with Novozym 435 showed good enantioselectivity also in bulk polymerization and resulted in enantiomerically enriched P((S)-4-MeCL) (eep up to 0.88). Subsequently, a novel initiator combining a primary alcohol to initiate the ring opening polymerization and a tertiary bromide to initiate atom transfer controlled radical polymerization (ATRP) was synthesized, and showed high initiator efficiencies (> 90%) in the ring opening polymerization of 4-methyl-epsilon-caprolactone in bulk. In addition, the enantioselectivity was retained (E = 11). By using Ni(PPh3)2Br2 as the ATRP catalyst, Novozym 435 could be effectively inhibited at the desired conversion of 4-methyl-epsilon-caprolactone, thus ensuring a high enantiomeric excess in the polymer backbone. At the same time, Ni(PPh3)2Br2 catalyzed the ATRP of methyl methacrylate resulting in the formation of P((S)-4-MeCL-b-MMA) block copolymers. By this combination of two inherently different polymerization reactions, chiral P((S)-4-MeCL-b-MMA) block copolymers can be conveniently obtained in one pot without intermediate workup.     

Controlling the Size, Shape and Stability of Supramolecular Polymers in Water

For aqueous based supramolecular polymers, the simultaneous control over shape, size and stability is very difficult¹. At the same time, the ability to do so is highly important in view of a number of applications in functional soft matter including electronics, biomedical engineering, and sensors. In the past, successful strategies to control the size and shape of supramolecular polymers typically focused on the use of templates^2,3, end cappers⁴ or selective solvent techniques⁵. Here we disclose a strategy based on self-assembling discotic amphiphiles that leads to the control over stack length and shape of ordered, chiral columnar aggregates. By balancing electrostatic repulsive interactions on the hydrophilic rim and attractive non-covalent forces within the hydrophobic core of the polymerizing building block, we manage to create small and discrete spherical objects^6,7. Increasing the salt concentration to screen the charges induces a sphere-to-rod transition. Intriguingly, this transition is expressed in an increase of cooperativity in the temperature-dependent self-assembly mechanism, and more stable aggregates are obtained. For our study we select a benzene-1,3,5-tricarboxamide (BTA) core connected to a hydrophilic metal chelate via a hydrophobic, fluorinated L-phenylalanine based spacer (Scheme 1). The metal chelate selected is a Gd(III)-DTPA complex that contains two overall remaining charges per complex and necessarily two counter ions. The one-dimensional growth of the aggregate is directed by π-π stacking and intermolecular hydrogen bonding. However, the electrostatic, repulsive forces that arise from the charges on the Gd(III)-DTPA complex start limiting the one-dimensional growth of the BTA-based discotic once a certain size is reached. At millimolar concentrations the formed aggregate has a spherical shape and a diameter of around 5 nm as inferred from ¹H-NMR spectroscopy, small angle X-ray scattering, and cryogenic transmission electron microscopy (cryo-TEM). The strength of the electrostatic repulsive interactions between molecules can be reduced by increasing the salt concentration of the buffered solutions. This screening of the charges induces a transition from spherical aggregates into elongated rods with a length > 25 nm. Cryo-TEM allows to visualise the changes in shape and size. In addition, CD spectroscopy permits to derive the mechanistic details of the self-assembly processes before and after the addition of salt. Importantly, the cooperativity -a key feature that dictates the physical properties of the produced supramolecular polymers- increases dramatically upon screening the electrostatic interactions. This increase in cooperativity results in a significant increase in the molecular weight of the formed supramolecular polymers in water.     

Poly(caprolactone-co-oxo-crown ether)-based poly(urethane)urea for soft tissue engineering applications

Random copolymers of epsilon-caprolactone and 2-oxo-12-crown-4 ether, poly(CL-co-OC), were used as soft segments in the synthesis of a set of poly(urethane)urea thermoplastic elastomers. With increasing OC content, the soft segment crystallinity decreased, which influenced the mechanical properties: strain induced crystallization disappeared upon the introduction of OC into poly(CL). The material therefore became weaker, however, without a reduction in strain at break. All polymers showed mechanical properties that are suitable for soft tissue engineering. Degradation studies of poly(CL-co-OC) copolymers revealed a higher intrinsic rate of hydrolysis as compared to poly(CL). When at least two neighboring OC units were present in the soft segment, a jump in the intrinsic hydrolysis rate was observed. From this study we deduced an ideal OC:CL ratio for the thermoplastic elastomer soft segments for soft tissue engineering applications. An in vitro degradation study of these poly(urethane)urea showed an increased weight loss. Combined with the enhanced hydrophilicity and reduced crystallinity, we are confident that this will indeed lead to an increased degradation rate in vivo.     

Polymersome nanoreactors for enzymatic ring-opening polymerization

Polystyrene-polyisocyanopeptide (PS-PIAT) polymersomes containing CALB in two different locations, one in the aqueous inner compartment and one in the bilayer, were investigated for enzymatic ring-opening polymerization of lactones in water. It is shown that the monomers 8-octanolactone and dodecalactone yield oligomers with this polymersome system. It is also observed that the polymerization activity is dependent on the position of the enzyme in the polymersome. SEM investigations show that the polymersome structures were destabilized during the polymerization. Further investigations show that the vesicular morphology of the polymersomes was destabilized only in the case of polymer product formation.