The Pluripotency Factor-Bound Intron 1 of Xist Is Dispensable for X Chromosome Inactivation and Reactivation In Vitro and In Vivo

Download : Download video (91MB)     

Interferograms plotted with reference change value (RCV) may facilitate the management of hemolyzed samples

BackgroundThe European Federation of Clinical Chemistry and Laboratory Medicine (EFLM) Working Group for Preanalytical Phase (WG-PRE) have recommended an algorithm based on the reference change value (RCV) to evaluate hemolysis. We utilized this algorithm to analyze hemolysis-sensitive parameters.MethodsTwo tubes of blood were collected from each of the 10 participants, one of which was subjected to mechanical trauma while the other was centrifuged directly. Subsequently, the samples were diluted with the participant''s hemolyzed sample to obtain the desired hemoglobin concentrations (0, 1, 2, 4, 6, 8, and 10 g/L). ALT, AST, K, LDH, T. Bil tests were performed using Beckman Coulter AU680 analyzer. The analytical and clinical cut-offs were based on the biological variation for the allowable imprecision and RCV. The algorithms could report the values directly below the analytical cut-off or those between the analytical and clinical cut-offs with comments. If the change was above the clinical cut-off, the test was rejected. The linear regression was used for interferograms, and the hemoglobin concentrations corresponding to cut-offs were calculated via the interferograms.ResultsThe RCV was calculated as 29.6% for ALT. Therefore, ALT should be rejected in samples containing >5.9 g/L hemoglobin. The RCVs for AST, K, LDH, and T. Bil were calculated as 27.9%, 12.1%, 19.2%, and 61.2%, while the samples'' hemoglobin concentrations for test rejection were 0.8, 1.6, 0.5, and 2.2 g/L, respectively.ConclusionsAlgorithms prepared with RCV could provide evidence-based results and objectively manage hemolyzed samples.     

A capillary electrophoretic method for monitoring the presence of alpha-tubulin in nuclear preparations

A sensitive capillary electrophoretic method was developed to detect the presence of alpha-tubulin, a microtubular cytoskeletal component, in isolated nuclear preparations. These preparations are treated with anti-alpha-tubulin primary mouse antibodies and then stained with a fluorescently labeled anti-mouse IgG antibody. The stained preparation is then analyzed by capillary electrophoresis with laser-induced fluorescence detection, a technique that allows for sensitive detection of fluorescently labeled species. Using this method, it is feasible to count individual subcellular aggregates containing alpha-tubulin (SATs), estimate the number of alpha-tubulin molecules per SAT, determine the cumulative intensity of all SATs as an estimate of the relative level of alpha-tubulin in a preparation, and obtain their apparent electrophoretic mobility distribution. The method was validated by comparing SATs from untreated cells with those from colchicine-treated cells. Since colchicine is a microtubule-disrupting agent, treatment reduced the number of SATs per cell as well as the cumulative intensity of all SATs in a preparation. In contrast, the apparent electrophoretic mobility distribution was not influenced by colchicine treatment, suggesting that this parameter is not strongly dependent on the alpha-tubulin content. Given the zeptomolar sensitivity of laser-induced fluorescence detection and the widespread availability of antibodies, the approach used here represents an improvement in the detection of cytoskeletal impurities in subcellular fractions.     

The evaluation of pre-grown mycelial pellets in decolorization of textile dyes during repeated batch process

This study was undertaken for the possibility of application of pre-grown pellets for biotechnological treatment of dyes and textile industry waste waters. Mycelial pellets of five different white rot fungi were tested for their dye decolorization activity. The pellets of Funalia trogii, Phanerochaete chrysosporium and Trametes versicolor were determined as the most effective ones. The decolorization ability of viable pellets was compared with the decolorization (adsorption) ability of dead pellets during repeated batch studies. Astrazon Black dye was decolorized effectively, about 90%, by viable pellets of all fungi during the first use. Viable F. trogii pellets were found as the most effective pellets. Upon pellet treatment not only a high decolorization but also reduced toxicity (antimicrobial activity) of the Astrazon Black dye was recorded. This type of decolorization activity with commercial or crude laccase was partially observed. Growing cells of F. trogii in batch system showed lower efficiency in color removal of mixed dyes compared to the pre-grown pellets in repeated batch system. The results in this study showed that mycelial pellets could effectively be used as an alternative to traditional physicochemical processes.     

Decolorization of textile dyeing wastewater by<Emphasis Type="Italic">Phanerochaete chrysosporium</Emphasis>

The potential use of fungal pellets for decolorization of the textile dyeing wastewater was evaluated. The live pellets of the fungus Phanerochaete chrysosporium were found to remove more than 95% of the color of this wastewater within 1 d. The dye-removal capacity was a function of time and was proportional to the agitation rate; the optimum temperature was 30 degrees C. Both live and dead pellets were further examined in a repeated-batch mode for 5 d. The decolorization performance of live pellets remained high and stable for 5 d and they showed twice to thrice higher decolorization capacity than dead pellets.     

Effects of repeated desflurane and sevoflurane anesthesia on enzymatic free radical scavanger system

Background: To investigate the possible effects of repeated sevoflurane and desflurane anesthesia on hepatocellular system by evaluating the free radical metabolism, hepatocellular enzymes and histopatholgical changes in rats. Methods: Four groups of animals were studied. Sevoflurane 2% (v/v) and desflurane 6% (v/v) in air/O₂ were administered to animals in group II (n = 9) and III (n = 9) respectively. 100% (v/v) O₂ was administered in group IV (n = 9). Administration was done for 60 minutes over 3 days. Nine animals were allocated to control group (group I), superoxide dismutase (SOD), catalase (CAT), glutathion peroxidase (GSH-Px), glutathione-s-transferase (GST) and thiobarbituric acid reactive substances (TBARS) were studied. Also electron microscopy was performed. Results: Catalase, SOD, GSH-Px, GST activities and TBARS levels were significantly higher in groups II and III than in group I (p < 0.05). All parameters were significantly higher in groups II versus group IV (p < 0.05). On the other hand, SOD, GSH-Px and GST activities were significantly elevated in group III than IV, but CAT activity and TBARS levels were not significantly. Catalase, SOD, GSH-Px, GST but not TBARS levels were significantly higher in groups II and III than in group IV (p < 0.05). TBARS levels were higher in group III than in group IV, but this elevation was not statistically significant. CAT, SOD and GSH-Px activities were significantly higher in groups II than in group III (p < 0.05). Conclusion: Although electron microscopy findings were similar for group II and III, we can conclude that sevoflurane might cause more cellular damage than desflurane by causing higher activation of free radical metabolising enzymes.     

Preparation and characterization of UV-curable polymeric support for covalent immobilization of xylanase enzyme

The hydroxyl group of poly(ethylene glycol) monoacrylate (PEGMA) was activated by 1,1′-carbonyldiimidazole (CDI) and then a xylanase enzyme was immobilized to amine active PEGMA. UV-curable polymeric support formulation was prepared by mixing the xylanase bonded PEGMA, aliphatic polyester, 2-hydroxyethyl methacrylate (HEMA), poly(ethylene glycol) diacrylate (PEGDA) and photoinitiator. After UV irradiation, the enzymatic activity of the polymeric matrix was evaluated and compared with the corresponding free enzyme. By immobilization, the temperature resistance of the enzyme was improved and showed maximum activity at 60 °C. pH dependent activities of the free and immobilized enzymes were also investigated, and it was found that the pH of maximum activity for the free enzyme was 6.0, while for the optimal pH of the immobilized enzyme was 6.5. The immobilized enzyme retained 75% of its activity after 33 runs. The morphology of the polymeric support was characterized by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) coupled with SEM was used to explore the chemical composition. The results have confirmed the evidence of enzyme in the structure of the polymeric material.