Biodegradation kinetics of poly(3-hydroxybutyrate)-based biopolymer systems

The aim of this study was to evaluate and to compare the long-term kinetics curves of biodegradation of poly(3-hydroxybutyrate) (PHB), its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and a PHB/polylactic acid composite. The total weight loss and the change of average viscosity molecular weight were used as the parameters reflecting the biodegradation degree. The rate of biodegradation was analyzed in vitro in the presence of lipase and in vivo after film implantation in animal tissues. The morphology of the PHB film surface was studied by the atomic force microscopy technique. It was shown that PHB biodegradation involves both polymer hydrolysis and its enzymatic biodegradation. The results obtained in this study can be used for the development of various PHB-based medical devices.     

The Biodegradation of Poly-β-Hydroxybutyrate (PHB) by a Model Soil Community: The Effect of Cultivation Conditions on the Degradation Rate and the Physicochemical Characteristics of PHB

The biodegradation of films made of poly--hydroxybutyrate (PHB) with a molecular mass of 1500 kDa was studied using a model soil community in the presence and absence of nitrate and at different concentrations of oxygen in the gas phase. The biodegradation of PHB was investigated with respect to changes in its molecular mass, crystallinity, and some mechanical properties.     

BSA Adsorption on Porous Scaffolds Prepared from BioPEGylated Poly(3-Hydroxybutyrate)

Porous scaffolds for tissue engineering have been prepared from poly(3-hydroxybutyrate) (PHB) and a copolymer of poly(3-hydroxybutyrate) and polyethylene glycol (PHB-PEG) produced by bioPEGylation. The morphology of the scaffolds and their capacity for adsorption of the model protein bovine serum albumin (BSA) have been studied. Scaffolds produced from bioPEGylated PHB adsorbed more BSA, whereas the share of protein irreversibly adsorbed on these scaffolds was significantly lower (33%) than in the case of PHB homopolymer-based scaffolds (47%). The effect of protein adsorption on scaffold biocompatibility in vitro was tested in an experiment that involved the cultivation of fibroblasts (line COS-1) on the scaffolds. PHB-PEG scaffolds had a higher capacity for supporting cell growth than PHB-based scaffolds. Thus, the bioPEGylated PHB-based polymer scaffolds developed in the present study have considerable potential for use in soft tissue engineering.     

Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer by <Emphasis Type="Italic">Azotobacter chroococcum</Emphasis> strain 7B

The ability of Azotobacter chroococcum strain 7B, producer of poly(3-hydroxybutyrate) (PHB), to synthesize its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)) was studied. It was demonstrated, for the first time, that A. chroococcum strain 7B was able to synthesize P(3HB-co-3HV) with various molar rates of HV in the polymer chain when cultivated on medium with sucrose and carboxylic acids as precursors of HV elements in the PHB chain, namely, valeric (13.1–21.6 mol %), propanoic (3.1 mol %), and hexanoic (2.1 mol %) acids. Qualitative and functional differences between PHB and P(3HB-co-3HV) were demonstrated by example of the release kinetic of methyl red from films made of synthesized polymers. Maximal HV incorporation into the polymer chain (28.8mol %) was recorded when the nutrient medium was supplemented with 0.1% peptone on the background of 20 mM valerate. These results suggest that that the studied strain can be regarded as a potential producer of not only PHB but also P(3HB-co-3HV).     

The biodegradation of poly-beta-hydroxybutyrate (PHB) by a model soil community: the effect of cultivation conditions on the degradation rate and the physicochemical characteristics of PHB

The biodegradation of films made of poly-beta-hydroxybutyrate (PHB) with a molecular mass of 1500 kDa was studied using a model soil community in the presence and absence of nitrate and at different concentrations of oxygen in the gas phase. The biodegradation of PHB was investigated with respect to changes in its molecular mass, crystallinity, and some mechanical properties.     

The Terpolymer Produced by Azotobacter Chroococcum 7B: Effect of Surface Properties on Cell Attachment

The copolymerization of poly(3-hydroxybutyrate) (PHB) is a promising trend in bioengineering to improve biomedical properties, e.g. biocompatibility, of this biodegradable polymer. We used strain Azotobacter chroococcum 7B, an effective producer of PHB, for biosynthesis of not only homopolymer and its main copolymer, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB-HV), but also novel terpolymer, poly(3-hydroxybutyrate-co-3-hydroxyvalerate)-poly(ethylene glycol) (PHB-HV-PEG), using sucrose as the primary carbon source and valeric acid and poly(ethylene glycol) 300 (PEG 300) as additional carbon sources. The chemical structure of PHB-HV-PEG was confirmed by ¹H nuclear-magnetic resonance analysis. The physico-chemical properties (molecular weight, crystallinity, hydrophilicity, surface energy) of produced biopolymer, the protein adsorption to the terpolymer, and cell growth on biopolymer films were studied. Despite of low EG-monomers content in bacterial-origin PHB-HV-PEG polymer, the terpolymer demonstrated significant improvement in biocompatibility in vitro in contrast to PHB and PHB-HV polymers, which may be coupled with increased protein adsorption, hydrophilicity and surface roughness of PEG-containing copolymer.     

Hydrolytic Degradation of Poly(3-Hydroxybutyrate) and Its Copolymer with 3-Hydroxyvalerate of Different Molecular Weights in vitro

The hydrolytic degradation of polymer films of poly(3-hydroxybutyrate) of different molecular weights and its copolymers with 3-hydroxyvalerate (9 mol % 3-hydroxyvalerate in the poly(3-hydroxybutyrate) chain) of different molecular weights was studied in model conditions in vitro. The changes in the physicochemical properties of the polymers were investigated using different analytical techniques: viscometry, differential scanning calorimetry, gravimetrical method, and water contact angle measurement for polymers. The data showed that in a period of 6 months the weight of polymer films decreased insignificantly. The molecular weight of the samples was reduced significantly; the largest decline (up to 80% of the initial molecular weight of the polymer) was observed in the high-molecular-weight poly(3-hydroxybutyrate). The surface of all investigated polymers became more hydrophilic. In this work, we focus on a mathematical model that can be used for the analysis of the kinetics of hydrolytic degradation of poly(3-hydroxyaklannoate)s by noncatalytic and autocatalytic hydrolysis mechanisms. It was also shown that the degree of crystallinity of some polymers changes differently during degradation in vitro. Thus, the studied polymers can be used to develop biodegradable medical devices such that they can perform their functions for a long period of time.     

Effect of growth conditions on the molecular weight of poly-3-hydroxybutyrate produced by <Emphasis Type="Italic">Azotobacter chroococcum</Emphasis> 7B

It has been shown that poly-3-hydroxybutyrate (PHB) of predetermined molecular weight can be obtained by varying the growth conditions of the producer strain, Azotobacter chroococcum 7B: pH, temperature, aeration, presence of sodium acetate as an additional carbon source, or growth on crude complex carbon sources (molasses, vinasse, or starch). High-molecular-weight polymer can be obtained at pH 7.0, optimal for the culture (1485 kDa), temperature 30–37°C (1600–1450 kDa, respectively), and low aeration (2215 kDa). The following factors decrease PHB MW: pH deviation to the acidic (pH 6.0, 476 kDa) or alkaline (pH 8.0, 354 kDa) range or lower temperature (20°C, 897 kDa). Introduction of additional carbon source (sodium acetate) at concentrations in the medium varying from 0 to 5 g/l provides an original method of production of PHB with predetermined MW in a wide range, from 270 to 1515 kDa, with high PHB content in the cell.     

Reduction of nitrates by cultures of Azotobacter indicum and Azotobacter chroococcum

The capacity for denitrification was studied in Azotobacter bacteria, which are free-living nitrogen-fixing obligatory aerobes. Data on the nitrate reduction to nitrites and nitric oxide by A. indicum under anaerobic conditions were obtained for the first time for genus Azotobacter.     

New poly(3-hydroxybutyrate)-based systems for controlled release of dipyridamole and indomethacin

New poly(3-hydroxybutyrate)-based systems for controlled release of anti-inflammatory and anti-thrombogenic drugs have been studied. The release occurs via two mechanisms (diffusion and degradation) operating simultaneously. Dipyridamole and indomethacin diffusion processes determine the rate of the release at the early stages of the contact of the system with the environment (the first 6–8 h). The coefficient of the release diffusion of a drug depends on its nature, the thickness of the poly(3-hydroxybutyrate) films containing the drug, the concentrations of dipyridamole and indomethacin, and the molecular weight of the poly(3-hydroxybutyrate). The results obtained are critical for developing systems of release of diverse drugs, thus, enabling the attainment of the requisite physiological effects on tissues and organs of humans.