A topological model for the haemolysin translocator protein HlyD

Summary A topological model for HlyD is proposed that is based on results obtained with gene fusions of lacZ and phoA to hlyD. Active H1yD-LacZ fusion proteins were only generated when lacZ was fused to hlyD. within the first 180 by (60 amino acids). H1yD-PhoA proteins exhibiting alkaline phosphatase (AP) activity were obtained when phoA was inserted into hlyD. between nucleotides 262 (behind amino acid position 87) and 1405 (behind amino acid position 468, only 10 amino acids away from the C-terminus of HlyD Active insertions of phoA into the middle region of hlyD. were not observed on in vivo transposition but such fusions exhibiting AP activity could be constructed by in vitro techniques. A fusion protein that carried the PhoA part close to the C-terminal end of HlyD proved to be the most stable HlyD-PhoA fusion protein. In contrast to the other, rather unstable, HlyD-PhoA⁺ fusions, no proteolytic degradation product of this HlyD-PhoA protein was observed and nearly all the alkaline phosphatase activity was membrane bound. Protease accessibility and cell fractionation experiments indicated that the alkaline phosphatase moiety of this fusion protein was located in the periplasm as for all other HlyD-PhoA⁺ proteins. These data and computer-assisted predictions suggest a topological model for HlyD with the N-terminal 60 amino acids located in the cytoplasm, a single transmembrane segment from amino acids 60 to 80 and a large periplasmic region extending from amino acid 80 to the C-terminus. Neither the HlyD fusion proteins obtained nor a mutant HlyD protein that had lost the last 10 amino acids from the C-terminus of HlyD exhibited translocator activity for HlyA or other reporter proteins carrying the HlyA signal sequence. The C-terminal 10 amino acids of HlyD showed significant similarity with the corresponding sequences of other HlyD-related proteins involved in protein secretion.     

Cultivation of Mycobacterium bovis BCG in bioreactors

The Mycobacterium bovis BCG vaccine for commercial use is classically produced as surface pellicles by culture on synthetic medium. Under these conditions, reproducibility of the cultures and quality assessment are hampered by slow growth of the bacilli, the formation of bacterial aggregates and a high proportion of dead bacilli after processing and final formulation of the vaccine. Here, we established dispersed cultures of M. bovis BCG in synthetic media in small-scale bioreactors. These cultures allow recording and adjusting of culture parameters and give rise to single bacilli with a high degree of live bacteria. In the murine model, bioreactor-grown M. bovis BCG exhibited slightly stronger replication and persistence than the vaccine produced under the classical conditions. The protective efficacy against challenge with M. tuberculosis was identical for both vaccine preparations.     

Identification of immunogenic antigens of Helicobacter pylori via the Escherichia coli hemolysin secretion system(1)

We describe a new procedure allowing the generation and detection of immunogenic antigens from Helicobacter pylori via the hemolysin secretion apparatus of Escherichia coli. The gene (or gene fragment) encoding the H. pylori protein (or protein domain) is inserted in-frame into a residual portion of the hemolysin gene (hlyA), encoding the HlyA secretion signal (HlyA(s)). These fusion proteins are secreted efficiently by E. coli. This new approach allows the identification of immunodominant antigens by using sera derived from H. pylori-infected patients suffering from different gastroduodenal pathologies. Three immunodominant antigens bearing the ureB (urease B-subunit), flaA (flagellin A-subunit), and an unknown ORF (HP0888) encoding an E. coli FecE analogous protein fused to hlyA(s) were identified and characterized.     

Striptease on glass: validation of an improved stripping procedure for in situ microarrays

Microarrays have rapidly become an indispensable tool for gene analysis. Microarray experiments can be cost prohibitive, however, largely due to the price of the arrays themselves. Whilst different methods for stripping filter arrays on membranes have been established, only very few protocols are published for thermal and chemical stripping of microarrays on glass. Most of these protocols for stripping microarrays on glass were developed in combination with specific surface chemistry and different coatings for covalently immobilizing presynthesized DNA in a deposition process. We have developed a method for stripping commercial in situ microarrays using a multi-step procedure. We present a method that uses mild chemical degradation complemented by enzymatic treatment. We took advantage of the differences in biochemical properties of covalently linked DNA oligonucleotides on in situ synthesized microarrays and the antisense cRNA hybridization probes. The success of stripping protocols for microarrays on glass was critically dependent on the type of arrays, the nature of sample used for hybridization, as well as hybridization and washing conditions. The protocol employs alkali hydrolysis of the cRNA, several enzymatic degradation steps using RNAses and Proteinase K, combined with appropriate washing steps. Stripped arrays were rehybridized using the same protocols as for new microarrays. The stripping method was validated with microarrays from different suppliers and rehybridization of stripped in situ arrays yielded comparable results to hybridizations done on unused, new arrays with no significant loss in precision or accuracy. We show that stripping of commercial in situ arrays is feasible and that reuse of stripped arrays gave similar results compared to unused ones. This was true even for biological samples that show only slight differences in their expression profiles. Our analyses indicate that the stripping procedure does not significantly influence data quality derived from post-primary hybridizations. The method is robust, easy to perform, inexpensive, and results after reuse are of comparable accuracy to new arrays.     

Numerous transposed sequences of mitochondrial cytochrome oxidase I-II in aphids of the genus Sitobion (Hemiptera: Aphididae)

Polymerase chain reaction (PCR) products corresponding to 803 bp of the cytochrome oxidase subunits I and II region of mitochondrial DNA (mtDNA COI-II) were deduced to consist of multiple haplotypes in three Sitobion species. We investigated the molecular basis of these observations. PCR products were cloned, and six clones from one individual per species were sequenced. In each individual, one sequence was found commonly, but also two or three divergent sequences were seen. The divergent sequences were shown to be nonmitochondrial by sequencing from purified mtDNA and Southern blotting experiments. All seven nonmitochondrial clones sequenced to completion were unique. Nonmitochondrial sequences have a high proportion of unique sites, and very few characters are shared between nonmitochondrial clones to the exclusion of mtDNA. From these data, we infer that fragments of mtDNA have been transposed separately (probably into aphid chromosomes), at a frequency only known to be equalled in humans. The transposition phenomenon appears to occur infrequently or not at all in closely related genera and other aphids investigated. Patterns of nucleotide substitution in mtDNA inferred over a parsimony tree are very different from those in transposed sequences. Compared with mtDNA, nonmitochondrial sequences have less codon position bias, more even exchanges between A, G, C and T, and a higher proportion of nonsynonymous replacements. Although these data are consistent with the transposed sequences being under less constraint than mtDNA, changes in the nonmitochondrial sequences are not random: there remains significant position bias, and probable excesses of synonymous replacements and of conservative inferred amino acid replacements. We conclude that a proportion of the inferred change in the nonmitochondrial sequences occurred before transposition. We believe that Sitobion aphids (and other species exhibiting mtDNA transposition) may be important for studying the molecular evolution of mtDNA and pseudogenes. However, our data highlight the need to establish the true evolutionary relationships between sequences in comparative investigations.      

SlyA, a regulatory protein from Salmonella typhimurium, induces a haemolytic and pore-forming protein in Escherichia coli

A chromosomal fragment from Salmonella typhimurium, when cloned in Escherichia coli, generates a haemolytic phenotype. This fragment carries two genes, termed slyA and slyB. The expression of slyA is sufficient for the haemolytic phenotype. The haemolytic activity of E. coli carrying multiple copies of slyA is found mainly in the cytoplasm, with some in the periplasm of cells grown to stationary phase, but overexpression of SlyB, a 15 kDa lipoprotein probably located in the outer membrane, may lead to enhanced, albeit unspecific, release of the haemolytic activity into the medium. Polyclonal antibodies raised against a purified SlyA-HlyA fusion protein identified the over-expressed monomeric 17 kDa SlyA protein mainly in the cytoplasm of E. coli grown to stationary phase, although smaller amounts were also found in the periplasm and even in the culture supernatant. However, the anti-SlyA antibodies reacted with the SlyA protein in a periplasmic fraction that did not contain the haemolytic activity. Conversely, the periplasmic fraction exhibiting haemolytic activity did not contain the 17 kDa SlyA protein. Furthermore, S. typhimurium transformed with multiple copies of the slyA gene did not show a haemolytic phenotype when grown in rich culture media, although the SlyA protein was expressed in amounts similar to those in the recombinant E. coli strain. These results indicate that SlyA is not itself a cytolysin but rather induces in E. coli (but not in S. typhimurium) the synthesis of an uncharacterised, haemolytically active protein which forms pores with a diameter of about 2.6 nm in an artificial lipid bilayer. The SlyA protein thus seems to represent a regulation factor in Salmonella, as is also suggested by the similarity of the SlyA protein to some other bacterial regulatory proteins. slyA- and slyB-related genes were also obtained by PCR from E. coli, Shigella sp. and Citrobacter diversus but not from several other gram-negative bacteria tested.     

SlyA,a regulatory protein from Salmonella typhimurium,induces a haemolytic and pore-forming protein in Escherichia coli

A chromosomal fragment from Salmonella typhimurium, when cloned in Escherichia coli, generates a haemolytic phenotype. This fragment carries two genes, termed slyA and slyB. The expression of slyA is sufficient for the haemolytic phenotype. The haemolytic activity of E. coli carrying multiple copies of slyA is found mainly in the cytoplasm, with some in the periplasm of cells grown to stationary phase, but overexpression of SlyB, a 15 kDa lipoprotein probably located in the outer membrane, may lead to enhanced, albeit unspecific, release of the haemolytic activity into the medium. Polyclonal antibodies raised against a purified SlyA-HlyA fusion protein identified the over-expressed monomeric 17 kDa SlyA protein mainly in the cytoplasm of E. coli grown to stationary phase, although smaller amounts were also found in the periplasm and even in the culture supernatant. However, the anti-SlyA antibodies reacted with the SlyA protein in a periplasmic fraction that did not contain the haemolytic activity. Conversely, the periplasmic fraction exhibiting haemolytic activity did not contain the 17 kDa SlyA protein. Furthermore, S. typhimurium transformed with multiple copies of the slyA gene did not show a haemolytic phenotype when grown in rich culture media, although the SlyA protein was expressed in amounts similar to those in the recombinant E. coli strain. These results indicate that SlyA is not itself a cytolysin but rather induces in E. coli (but not in S. typhimurium) the synthesis of an uncharacterised, haemolytically active protein which forms pores with a diameter of about 2.6 nm in an artificial lipid bilayer. The SlyA protein thus seems to represent a regulation factor in Salmonella, as is also suggested by the similarity of the SlyA protein to some other bacterial regulatory proteins. slyA- and slyB-related genes were also obtained by PCR from E. coli, Shigella sp. and Citrobacter diversus but not from several other gram-negative bacteria tested.