Kinetic behaviour of α-galactosidase produced by Absidia griseola: a comparison between free and immobilized forms of the enzyme

In this research the characteristics of free (partially purified) and immobilized (mould pellets of Absidia griseola) -galactosidase have been investigated. Inhibition studies of the enzyme showed that p-nitrophenol and sucrose do not have any inhibitory effect on the enzyme, but that galactose is a competitive inhibitor. In the immobilized form, inhibition was lower than in the free enzyme and the level of inhibition decreased as the temperature increased. The activity and stability of free and immobilized enzyme were investigated with respect to temperature, and the results showed that the optimal temperature range of the free enzyme was 45–50 °C, while the immobilized enzyme had an optimum at 55–60 °C. The optimum pH for the free enzyme was 6.0 and the value was decreased to 5.0 by immobilizing. The experimental effectiveness factors were found to be represented as a single function of the modified Thiele modulus, including parameters such as pellet size, enzyme concentration in the pellets and substrate concentration. Both experimental and theoretical data concerning effectiveness factors are nearly the same.     

Expression of TGF-β3 in isolated fibroblasts from foreskin

Background:

The multifunctional transforming growth factor beta (TGF-β) is a glycoprotein that exists in three isoforms. TGF-β3 expression increases in fetal wound healing and reduces fibronectin and collagen I and III deposition, and also improves the architecture of the neodermis which is a combination of blood vessels and connective tissue during wound healing. Fibroblasts are key cells in the wound healing process. TGF-β3 plays a critical role in scar-free wound healing and fibroblast actions in the wound healing process. The aim of this study was to express the TGF-β3 gene (tgf-b3) in human foreskin fibroblasts (HFF’s).

Methods:

We obtained HFF’s from a newborn and a primary fibroblast culture was prepared. The cells were transfected with TGF-β3-pCMV6-XL5 plasmid DNA by both lipofection and electroporation. Expression of TGF-β3 was measured by enzyme-linked immunosorbent assay (ELISA).

Results:

The highest TGF-β3 expression (8.3-fold greater than control) was obtained by lipofection after 72 hours using 3 µl of transfection reagent. Expression was 1.4-fold greater than control by electroporation.

Conclusions:

In this study, we successfully increased TGF-β3 expression in primary fibroblast cells. In the future, grafting these transfected fibroblasts onto wounds can help the healing process without scarring.Key Words: Fibroblasts, Gene expression, TGF-β3     

Isolation of Bacteria Able to Metabolize High Concentrations of Formaldehyde

Summary Nineteen bacterial strains able to degrade and metabolize formaldehyde as a sole carbon source were isolated from soil and wastewater of a formaldehyde production factory. The samples were cultured in complex and mineral salts media containing 370 mg formaldehyde/l. The bacterial strains were identified to be Pseudomonas pseudoalcaligenes, P. aeruginosa, P. testosteroni, P. putida, and Methylobacterium extorquens. After adaptation of these microorganisms to high concentrations of formaldehyde; two isolated strains of M. extorquens (strains ESS and PSS) and four strains of P. pseudoalcaligenes (strains LSW, SSW, NSW and OSS) degraded 1850 mg formaldehyde/l, where as P. pseudoalcaligenes strain OSS completely consumed 3700 mg of formaldehyde/l after 24 h and degraded 70% of 5920 mg of formaldehyde/l after 72 h.     

Optimization of Non-Nutritional Factors for a Cost-Effective Enhancement of Nisin Production Using Orthogonal Array Method

In order to increase nisin production in a cost-effective manner, non-nutritional factors as well as nutritional parameters must be optimized. In this study, optimization of the most important non-nutritional factors for nisin production using orthogonal array method was performed. Optimization of temperature, agitation, age and size of inoculum, medium initial pH value and flask volume/medium volume ratio in de Man, Rogosa and Sharpe (MRS) medium in batch fermentation was accomplished. Nisin was produced by Lactococcus lactis subsp. lactis PTCC 1336 and measured by bioassay method using Micrococcus luteus PTCC 1169 as the nisin-sensitive strain. The optimum levels of non-nutritional factors for maximum nisin production and productivity were obtained as: flask volume/medium volume ratio: 5.00, medium initial pH value: 8.00, inoculum size: 1%, inoculum age: 24 h old (A = 1.7), agitation: 100 rpm and temperature: 27 °C. Under the optimized conditions, maximum nisin production and maximum nisin productivity were 599.70 IU/mL and 37.48 IU/mL/h, respectively.     

Phenotypic plasticity of melanocytes derived from human adult skin

We previously described a novel in vitro culture technique for dedifferentiated human adult skin melanocytes. Melanocytes cultured in a defined, cholera toxin and PMA free medium became bipolar, unpigmented, and highly proliferative. Furthermore, TRP-1 and c-Kit expression disappeared and EGFR receptor and nestin expression were induced in the cells. Here, we further characterized the phenotype of these dedifferentiated cells and by comparing them to mature pigmented melanocytes we detected crucial steps in their phenotype change. Our data suggest that normal adult melanocytes easily dedifferentiate into pluripotent stem cells given the right environment. This dedifferentiation process described here for normal melanocyte is very similar to what has been described for melanoma cells, indicating that phenotype switching driven by environmental factors is a general characteristic of melanocytes that can occur independent of malignant transformation.     

How Does the Death Conscious Culture of Iran Affect Experiences of Depression?

Culture, Medicine, and Psychiatry - This paper is divided into two parts. First I argue for the existence of a death-conscious culture in Iran, traceable in religious and literary texts, and...     

Study of bioactive compounds in Arthrospira platensis MGH-1 fortified with micronutrients of iron,zinc, and manganese

Journal of Applied Phycology - The effects of various concentrations of iron, zinc, and manganese on Arthrospira platensis MGH-1 growth and the capability of this cyanobacterium to accumulate these...     

3D-printed PLA/Gel hybrid in liver tissue engineering: Effects of architecture on biological functions

The liver is one of the vital organs in the body, and the gold standard of treatment for liver function impairment is liver transplantation, which poses many challenges. The specific three-dimensional (3D) structure of liver, which significantly impacts the growth and function of its cells, has made biofabrication with the 3D printing of scaffolds suitable for this approach. In this study, to investigate the effect of scaffold geometry on the performance of HepG2 cells, poly-lactic acid (PLA) polymer was used as the input of the fused deposition modeling (FDM) 3D-printing machine. Samples with simple square and bioinspired hexagonal cross-sectional designs were printed. One percent and 2% of gelatin coating were applied to the 3D printed PLA to improve the wettability and surface properties of the scaffold. Scanning electron microscopy pictures were used to analyze the structural properties of PLA–Gel hybrid scaffolds, energy dispersive spectroscopy to investigate the presence of gelatin, water contact angle measurement for wettability, and weight loss for degradation. In vitro tests were performed by culturing HepG2 cells on the scaffold to evaluate the cell adhesion, viability, cytotoxicity, and specific liver functions. Then, high-precision scaffolds were printed and the presence of gelatin was detected. Also, the effect of geometry on cell function was confirmed in viability, adhesion, and functional tests. The albumin and urea production of the Hexagonal PLA scaffold was about 1.22 ± 0.02-fold higher than the square design in 3 days. This study will hopefully advance our understanding of liver tissue engineering toward a promising perspective for liver regeneration.