Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

immunocytochemical localization of urokinase-type plasminogen activator in lewis lung carcinoma

The invasively growing and metasizing Lewis lung carcinoma consistently contained urokinase-type plasminogen activator (u-PA) enzyme activity. When investigated immunocytochemically with antibodies against u-PA, different parts of individual tumors showed a pronounced heterogeneity in staining intensity. Strong staining was found in areas with invasive growth and degradation of surrounding normal tissue, while other areas were completely devoid of staining. Immunoreactivity occurred both with a perinuclear cytoplasmic localization in tumor cells and associated with apparently extracellular material. SDS PAGE of tumor extracts, under both reducing and nonreducing conditions, followed by immunoblotting, showed only one immunocytochemically stainable band with an electrophoretic mobility corresponding to that of purified proenzyme to u-PA, while no two-chain u-PA was detected. This indicates that the major part of the activator in Lewis lung carcinoma is present as one-chain pro-u-PA.     

Dihydroisocoumarins and phthalide from wood samples infested by fungi

Wood samples, infested by fungi during storage, were shown to contain, besides the known 5-methyl-mellein, additional (3R)-8-hydroxy-3-methyl-3,4-dihydroisocoumarins substituted by 7-methyl, 5-formyl, 5-carboxy, 5-hydroxy, 5-methoxy, 6-methoxy-5-methyl and 6,7-dimethoxy-5-methyl groups, as well as 6-formyl-7-hydroxy-5-methoxy-4-methylphthalide. Several 2-methylchromanones were synthesized in order to show that this class of compounds can be distinguished from 3-methyl-3,4-dihydroisocoumarins by MS.     

Xanthones from Tovomita pyrifolium

The wood of Tovomita pyrifolium (Guttiferae) contains the novel tovopyrifolins A [1,6-dihydroxy-7-methoxy-5-prenyl-6′,6′-dimethylpyrano (2′,3′:3,2)xanthone], B (1,5-dihydroxy-3,4-dimethoxyxanthone) and C (1,3,5-trihydroxy-2-methoxyxanthone) and also the known tovophyllins A and B [structure revised to 1,6-dihydroxy-5-prenyl-6′, 6′-dimethylpyrano(2′,3′:3,2)-6″,6″-dimethylpyrano(2″,3″:7,8)xanthone].     

Post-construction avian mortality monitoring at Project West Wind

Abstract

Post-construction avifauna investigations were undertaken at Project West Wind, Meridian Energy Limited's 62-turbine wind farm on the Wellington south coast. These investigations were required in accordance with the resource consent conditions to quantify the level of avian mortalities occurring at the wind farm, particularly in regard to New Zealand falcon (Falco novaeseelandiae), kākā (Nestor meridionalis) and kererū (Hemiphaga novaeseelandiae). This is the first comprehensive study at a New Zealand operating wind farm. The methods included three field components necessary to calculate annual estimates of mortalities across the wind farm site: routine turbine searches; carcass detection trials; and carcass removal trials. Results from years 1 and 2 of a three-year programme are presented. To date, mortalities have been recorded for 17 taxa at 18 of the 24 study turbines. There have been no recorded mortalities of falcon, kākā or kererū. Australasian harrier (Circus approximans) has been the species for which the most mortalities have been recorded. Overall estimated annual mortality rates for years 1 and 2 were calculated to be approximately six and five birds per turbine respectively.     

Genetic architecture of survival and fitness-related traits in two populations of Atlantic salmon

The additive genetic effects of traits can be used to predict evolutionary trajectories, such as responses to selection. Non-additive genetic and maternal environmental effects can also change evolutionary trajectories and influence phenotypes, but these effects have received less attention by researchers. We partitioned the phenotypic variance of survival and fitness-related traits into additive genetic, non-additive genetic and maternal environmental effects using a full-factorial breeding design within two allopatric populations of Atlantic salmon (Salmo salar). Maternal environmental effects were large at early life stages, but decreased during development, with non-additive genetic effects being most significant at later juvenile stages (alevin and fry). Non-additive genetic effects were also, on average, larger than additive genetic effects. The populations, generally, did not differ in the trait values or inferred genetic architecture of the traits. Any differences between the populations for trait values could be explained by maternal environmental effects. We discuss whether the similarities in architectures of these populations is the result of natural selection across a common juvenile environment.     

Alkaline-sulfite pretreatment and use of surfactants during enzymatic hydrolysis to enhance ethanol production from sugarcane bagasse

Sugarcane bagasse is a by-product from the sugar and ethanol industry which contains approximately 70 % of its dry mass composed by polysaccharides. To convert these polysaccharides into fuel ethanol it is necessary a pretreatment step to increase the enzymatic digestibility of the recalcitrant raw material. In this work, sugarcane bagasse was pretreated by an alkaline-sulfite chemithermomechanical process for increasing its enzymatic digestibility. Na₂SO₃ and NaOH ratios were fixed at 2:1, and three increasing chemical loads, varying from 4 to 8 % m/m Na₂SO₃, were used to prepare the pretreated materials. The increase in the alkaline-sulfite load decreased the lignin content in the pretreated material up to 35.5 % at the highest chemical load. The pretreated samples presented enhanced glucose yields during enzymatic hydrolysis as a function of the pretreatment severity. The maximum glucose yield (64 %) was observed for the samples pretreated with the highest chemical load. The use of 2.5 g l^?1 Tween 20 in the hydrolysis step further increased the glucose yield to 75 %. Semi-simultaneous hydrolysis and fermentation of the pretreated materials indicated that the ethanol yield was also enhanced as a function of the pretreatment severity. The maximum ethanol yield was 56 ± 2 % for the sample pretreated with the highest chemical load. For the sample pretreated with the lowest chemical load (2 % m/m NaOH and 4 % m/m Na₂SO₃), adding Tween 20 during the hydrolysis process increased the ethanol yield from 25 ± 3 to 39.5 ± 1 %.