Ultrastructure of spermatogenesis and mature spermatozoa in the flatworm Prosthiostomum siphunculus (Polycladida,Cotylea)

This is the first study investigating spermatogenesis and spermatozoan ultrastructure in the polyclad flatworm Prosthiostomum siphunculus. The testes are numerous and scattered as follicles ventrally between the digestive ramifications. Each follicle contains the different stages of sperm differentiation. Spermatocytes and spermatids derive from a spermatogonium and the spermatids remain connected by intercellular bridges. Chromatoid bodies are present in the cytoplasm of spermatogonia up to spermatids. During early spermiogenesis, a differentiation zone appears in the distal part of spermatids. A ring of microtubules extends along the entire sperm shaft just beneath the cell membrane. An intercentriolar body is present and gives rise to two axonemes, each with a 9 + “1” micro‐tubular pattern. Development of the spermatid leads to cell elongation and formation of a filiform, mature spermatozoon with two free flagella and with cortical microtubules along the sperm shaft. The flagella exit the sperm shaft at different levels, a finding common for acotyleans, but so far unique for cotylean polyclads. The Golgi complex produces numerous electron‐dense bodies of two types and of different sizes. These bodies are located around a perinuclear row of mitochondria. The elongated nucleus extends almost along the entire sperm body. The nucleus is wide in the proximal part and becomes narrow going towards the distal end. Thread‐like chromatin mixed with electron‐dense intranuclear spindle‐shaped bodies are present throughout nucleus. The general sperm ultrastructure, the presence of intranuclear bodies and a second type of cytoplasmic electron‐dense bodies may provide characters useful for phylogenetic analysis.     

The reduction of wax precipitation in waxy crude oils by <Emphasis Type="Italic">Pseudomonas</Emphasis> species

Crude oil with different concentrations was subjected to Pseudomonas species at 37 degrees C and various incubation periods. The results showed that Pseudomonas species grew faster at 1% (v/v) concentration of crude oil and exhibited high biodegradation ability within 1 week. On measuring the emulsification activity and emulsion stability during different stages of growth, in various immiscible hydrocarbons, it appeared that the species was able to produce a stable emulsion with a maximum at the end of stationary phase of growth. The gas chromatography analysis of the saturated hydrocarbons of crude oil showed that, an increase in concentration of iso-alkanes in the range of C15-C20, and a bioconversion of heavy iso-alkanes in the range of C21-C22+. Chemical analysis of crude oil by liquid chromatographic technique before and after growth showed that, the saturated alkanes were more degradable than aromatic and asphaltenic compounds. Treatment by Pseudomonas species may possibly be an effective method for the biodegradation of heavy paraffinic hydrocarbon leading to an enhancement in crude oil properties.     

Functionalization of cotton fabrics with titanium oxide doped silver nanoparticles: Antimicrobial and UV protection activities

The target of our current work was designed to prepare titanium oxide doped silver nanoparticles (Ag/TiO₂NPs) and their impact on the functionalization of cotton fabrics. Additionally, the effect of Ag/TiO₂NPs was compared with the individually prepared silver nanoparticles (AgNPs) and titanium oxide nanoparticles (TiO₂NPs). In this work, AgNPs were prepared in the solid state using arabic gum as efficient stabilizing and reducing agent. Then, two concentrations of the as-synthesized nanoparticles were used to functionalize the cotton fabrics by pad-dry-cure treatment in the presence of fixing agent to increase the durability of treated cotton fabrics against vigorous washing cycles. The findings implied that the as-prepared nanoparticles were successfully synthesized in nano-size with spherical shape and homogeneity. The efficacy of the functionalized cotton fabrics with those nanoparticles were evaluated in terms of multifunctional properties including antimicrobial and ultraviolet protection factor (UPF) and the mechanical features before and after many washing cycles; 10, 15 and 20 times. The resultant also proved that Ag/TiO₂NPs-treated cotton fabrics exhibited the greater values of both antimicrobial and UPF properties with enhancement in the tensile strength and elongation features. Thus, the combination between these two nanoparticles through doping reaction is suitable for imparting superior antimicrobial properties against the four tested microbial species (Staphylococcus aureus, Escherichia coli, Candida albicans, and Aspergillus niger) and good UPF properties. Depending on the promising obtained results of the multi-finishing fabrics, these nanoparticles of Ag/TiO₂NPs can be applied for the production of an efficient medical clothes for doctors, nurses and bed sheets for patients in order to kill and prevent the spread of bacteria and then, reduce the transmission of infection to others.     

A numerically validated probabilistic model of a simplified total hip replacement construct

Hip replacement constructs are paradigms of uncertain systems, and as such are suited to the application of probabilistic methods to assess their structural integrity. In order to gain confidence in a probabilistic model, it would be useful to verify the findings with experimental data; however, this is difficult to achieve in practice because of the exhaustive number of parameter combinations that need to be tested. As an alternative to experimental testing, benchmarking can be carried out provided a known analytical solution is available. To this end, a simplified 2D two-beam model of the femoral part of a total hip replacement construct was utilised to analyse uncertainties and variability in the construct as it is subjected to load. The use of a simplified model enabled geometric parameters to be investigated; these are commonly not considered in probabilistic models due to the increased complexity involved. Analytical and finite element representations of the model were developed and compared. The probabilistic study used the Monte Carlo simulation technique and the first-order reliability method to look at the inducible displacement of a hip implant, a phenomenon that has been linked to the most common cause of hip implant failure, aseptic loosening. Excellent correlation was observed between the analytical and probabilistic solutions, and it was shown that probabilistic approaches could efficiently predict the response of the simplified beam model while readily identifying the parameters most likely to compromise the structural integrity of the construct.     

A numerically validated probabilistic model of a simplified total hip replacement construct

Hip replacement constructs are paradigms of uncertain systems, and as such are suited to the application of probabilistic methods to assess their structural integrity. In order to gain confidence in a probabilistic model, it would be useful to verify the findings with experimental data; however, this is difficult to achieve in practice because of the exhaustive number of parameter combinations that need to be tested. As an alternative to experimental testing, benchmarking can be carried out provided a known analytical solution is available. To this end, a simplified 2D two-beam model of the femoral part of a total hip replacement construct was utilised to analyse uncertainties and variability in the construct as it is subjected to load. The use of a simplified model enabled geometric parameters to be investigated; these are commonly not considered in probabilistic models due to the increased complexity involved. Analytical and finite element representations of the model were developed and compared. The probabilistic study used the Monte Carlo simulation technique and the first-order reliability method to look at the inducible displacement of a hip implant, a phenomenon that has been linked to the most common cause of hip implant failure, aseptic loosening. Excellent correlation was observed between the analytical and probabilistic solutions, and it was shown that probabilistic approaches could efficiently predict the response of the simplified beam model while readily identifying the parameters most likely to compromise the structural integrity of the construct.     

A biomechanical model to simulate the effect of a high vertical loading on trunk flexural stiffness

A human trunk model was developed to simulate the effect of a high vertical loading on trunk flexural stiffness. A force–length relationship is attributed to each muscle of the multi-body model. Trunk stiffness and muscle forces were evaluated experimentally and numerically for various applied loads. Experimental evaluation of trunk stiffness was carried out by measuring changes in reaction force following a sudden horizontal displacement at the T10 level prior to paraspinal reflexes induction. Results showed that the trunk stiffness increases under small applied loads, peaks when the loads were further increased and decreases when higher loads are applied. A sensitivity analysis to muscle force–length relationship is provided to determine the model's limitations. This model pointed out the importance of taking into account the changes in muscle length to evaluate the effect of spinal loads beyond the safe limit that cannot be evaluated experimentally and to predict the trunk instability under vertical load.     

Effects of strength training with elastic band programme on fitness components in young female handball players: a randomized controlled trial

This study examined the effect of a 10-week programme of strength training with elastic band (STEB) on fitness components in young female handball players. Twenty-six young female handball players (aged 15.8 ± 0.2 years) from the same club participated in this study. They were randomly assigned between experimental (EG; n = 13) and control (CG; n = 13) groups. The EG performed the STEB, replacing some handball-specific drills in the regular handball training. The CG followed the regular handball training (i.e., mainly technical-tactical drills, small sided and simulated games, and injury prevention drills). Two-way analyses of variance were used to assess: handgrip; back extensor strength; medicine ball throw; 30 m sprint times; Modified Illinois change-of-direction (Illinois-MT); four jump tests: squat jump (SJ), countermovement jump (CMJ), countermovement jump with arm swing (CMJA) and five-jump test (5JT); static (Stork test) and dynamic balance (Y Balance Test); and repeated sprint T-test (RSTT). Results revealed significant gains in handgrip - right (p < 0.001, d = 1.75: large), handgrip - left (p < 0.001, d = 2.52: large), back extensor (p < 0.001, d = 2.01: large), and medicine ball throw (p = 0.002, d = 0.95: large) with EG compared to the CG. The EG also demonstrated greater improvement in sprint performance over 20 m (Δ = 10.6%, p = 0.001, d = 1.07: large) and 30 m (Δ = 7.2%, p < 0.0001, d = 1.56: large) compared to the CG. The EG showed better Illinois-MT (Δ = 5.6%, p = 0.034, d = 0.62: medium) compared to the CG. Further, EG posted significant improvements in the SJ (Δ = 17.3%, p = 0.048, d = 0.58: medium), CMJ (Δ = 17.7%, p = 0.017 d = 0.71: medium), and CMJA (Δ = 16.3%, p = 0.019, d = 0.69: medium) compared to the CG. Similarly, the EG exhibited significant improvement in RSTT best time [p = 0.025, d = 0.66 (medium)], RSTT mean time [p = 0.019, d = 0.69 (medium)] and RSTT total time [p = 0.019, d = 0.69 (medium)] compared to the CG. In conclusion, the 10-week STEB improved the physical abilities in young female handball players.     

Insemination and embryonic development of some Mediterranean polyclad flatworms

We document the specific patterns of egg plates, the numbers and size of embryos per cocoon and the major stages of the spiralian embryonic development in four Mediterranean polyclads. These include the two cotylean species Prosthiostomum siphunculus (Delle Chiaje, 1828) Lang, 1884 and Thysanozoon brocchii (Risso, 1818) Grube, 1840, both with Müller's larvae, the directly developing acotylean Echinoplana celerrima Haswell, 1907 as well as the acotylean Imogine mediterranea (Galleni, 1976) JenningsandNewman, 1996 with Götte's larva. The duration of embryonic development in three polyclads was tested at different temperatures, suggesting a strong decrease in developmental time with higher temperature (17°C instead of 15°C). In P. siphunculus, we also controlled salinity and light conditions, observing slightly faster development at salinity of 3.5%, and no major effect of light on development. In polyclads, insemination can occur by true copulation, dermal impregnation or hypodermic insemination. We used live observations and sagittal serial sections to detect sperm in tissues of the recipient animal. We found that there is no clear relationship between the presence or absence of a penis or Lang's vesicle and the mode of insemination, which can vary considerably even between species of the same genus.     

Experimental and Numerical Analyses of the Pull-out Response of a Steel Post/Bovine Bone Cementless Fixation

Effect of initial interference fit on pull-out strength in cementless fixation between bovine tibia and smooth stainless steel post was investigated in this study.Compressive behavior of bovine spongious bone was studied using mechanical testing in order to evaluate the elastic-plastic properties in different regions of the proximal tibia.Friction tests were carried out in the aim to evaluate the friction behavior of the contact between bovine spongious bone and stainless steel.A cylindrical stainless steel post inserted in a pre-drilled bovine tibia with an initial interference fit was taken as an in vitro model to assess the contribution of post fixation to the initial stability of the Total Knee Arthroplasty (TKA) tibial component.Pull-out experiments were carried out for different initial interference fits.Finite Element Models (FEM) using local elastic-plastic properties of the bovine bone were developed for the analysis of the experimental ultimate pull-out force results.At the post/bone interface,Coulomb friction was considered in the FEM calculations with pressure-dependent friction coefficient.It was found that the FEM results of the ultimate force are in good agreement with the experimental results.The analysis of the FEM interfacial stresses indicates that the micro-slip initiation depends on the local bone properties.     

Degradation of methylene blue using co-dopants Mg and Se in an hydroxyapatite composite

In this work, a comparative study was made of different magnesium ion content incorporated into hydroxyapatite (HAP) and modified with selenite ions, with the aim to develop the degradation performance of methylene blue. Although the dopant metal (Mg²⁺) was present at a relatively low ratio, it induced a change in the microstructure, morphology, surface area, external surface charge, particle size, and degradation performance. The effect of magnesium and selenium binary doping on microstructure and degradation of methylene blue was evaluated. The external surface charge measured by zeta potential clarified that the highest negativity was −11.8 mV and this was accomplished in 1.0 Mg/Se-HAP. Furthermore, the roughness average increased from 36.8 nm, reaching 59.2 nm upon the addition of Mg(II). Moreover, transmission electron microscope micrographs showed that compositions were formed as rod shapes. The process of degradation was optimized, showing effectiveness in methylene blue degradation of 62.4% after 150 min of exposure to visible light. Electrostatic attraction and H-bonding, and coordination played vital roles in the adsorption process. The recyclability of the as-prepared compositions demonstrated that the effectiveness had been reduced to ~54.2% after five times of re-use.