The emerging role of miR-200 family in metastasis: focus on EMT,CSCs, angiogenesis,and anoikis

Introduction

Cancer is the second major threat to human society and one of the main challenges facing healthcare systems. One of the main problems of cancer care is the metastases of cancer cells that cause 90% of deaths due to cancer. Multiple molecular mechanisms are involved in cancer cell metastasis. Therefore, a better understanding of these molecular mechanisms is necessary for designing restrictive strategies against cancer cell metastasis. Accumulating data suggests that MicroRNAs (miRNAs) are involved in metastasis and invasion of human tumors through regulating multiple genes expression levels that are involved in molecular mechanisms of metastasis. The goal of this review is to present the molecular pathways by which the miR 200 family manifests its effects on EMT, cancer stem cells, angiogenesis, anoikis, and the effects of tumor cell metastases.

Methods

A detailed literature search was conducted to find information about the role of the miR-200 family in the processes involved in metastasis in various databases.

Results

Numerous lines of evidence revealed an association between the mir-200 family and metastasis of human tumors by impressing processes such as cancer stem cells, EMT, angiogenesis, and anoikis.

Conclusions

Understanding the molecular mechanisms associated with metastasis in which the miR-200 family is involved can be effective in treating metastatic cancers.

Graphic abstract

     

Ultra-compact Spatial Terahertz Switch Based on Graphene Plasmonic-Coupled Waveguide

We are proposing graphene (G)-based multilayered plasmonic spatial switch, operating at 10 THz. It is composed of hBN/Ag/hBN/G/hBN/G/hBN/SiO₂/p⁺-Si multilayers. When a 10-THz transverse magnetic (TM)-polarized signal is normally incident upon the structure top surface, the nanoaperture devised in the Ag nanolayer, acting as a grating, excites surface plasmons at the top graphene micro-ribbons/hBN interface. These surface plasmons depending on the graphenes chemical potentials can be coupled to the lower-right or left graphene micro-ribbons and continue to propagate laterally towards the corresponding output port. Numerical simulations show that a change of ∆V_G ≈ ± 2.7 V in the voltage, applied to the gated micro-ribbons, can modulate their chemical potentials sufficiently to switch the right (left) output port from ON (OFF) to OFF(ON) and vice versa. Besides its low power consumption, the switch ultra-small dimensions make it a potential spatial router suitable for THz-integrated circuit applications.

     

Variation of Essential Oil Content and Composition,Phenolics, and Yield Related Traits Using Different Pollination Systems in Populations of Thymus Species

The production of self-pollinated plants could be important for improving medicinal plants secondary metabolites. In this study, 11 Thymus populations from eight species were evaluated to determine the effect of self and open pollination on agro-morphological characteristics, total phenolic content (TPC), essential oil (EO) content, and EO components. Inbreeding led to some positive effects of above mentioned traits in most of the studied populations. Total phenolic content ranged from 7.07 to 52.69 mg tannic acid equivalents (TAE) g⁻¹ dry weight (DW) in open pollinated derived populations, while it varied from 1.2 to 55.03 mg TAE g⁻¹ DW in self-pollinated ones. Under open and self-pollination condition, the highest EO content was obtained in T. trautvetteri (3.37 %) and T. pubescens (1.96 %), respectively. Gas chromatography-mass spectrometry (GC/MS) identified 42 compounds including thymol, carvacrol, linalool, p-cymene, γ-terpinene, terpinen-4-ol, and α-terpineol as the main compounds. In most cases, selfed plants compared to open pollinated ones, revealed higher thymol content. T. daenensis-1 showed a significant increase in thymol content (from 25.22 % to 74.3 %) due to self-pollination. Moreover, self-pollination led to emergence of some new compounds. Carvacrol methyl ether was the constituents of Thymus EO that are being reported in self-pollinated populations. Finally, inbreeding in Thymus might be suggested as a useful tool to increase genetic homogeneity for the selection of superior plants for improving secondary metabolite.     

Dehydroquinate synthase: the role of divalent metal cations and of nicotinamide adenine dinucleotide in catalysis

The cofactor requirements of dehydroquinate synthase from Escherichia coli have been characterized. The homogeneous enzyme, purified from the overproducing strain RB791 (pJB14), is a monomeric metalloenzyme of Mr = 39,000 that contains 1 mol of tightly bound Co(II) according to atomic absorption analysis. The holoenzyme rapidly loses activity upon incubation with EDTA, giving rise to a stable but catalytically inactive apoenzyme. Activity is fully restored by reconstitution with Co(II) and partially restored with other divalent cations. Reconstitution of the apoenzyme with Zn(II) (which is probably the functioning metal in vivo) restores activity to 53% of the level observed with the Co(II)-holoenzyme. The presence of the substrate 3-deoxy-D-arabino-heptulosonate 7-phosphate (1) blocks the inactivation by EDTA. Dehydroquinate synthase also binds 1 mol of NAD+, the presence of which is essential for catalytic activity. The rate constant for the dissociation of NAD+ from the Co(II)-holoenzyme was found to be 0.024 min-1. Under turnover conditions with saturating levels of substrate, the dissociation rate of NAD+ increases by a factor of 40, to 1 min-1. Under these conditions (pH 7.5, 20 degrees C), the Km for NAD+ was determined to be 80 nM.     

A multivariate study of resource partitioning in soft bottom lotic Chironomidae

For two years a community of larval chironomid midges was studied in a sandy-run portion of a fourth order natural stream in SE Ohio, U.S.A. in order to determine if the species partitioned the spatial resources. The habitat structure was simplified from ten habitat variables to three significant principal components. The three eigenvectors were easily interpreted as sediment size, sediment heterogeneity, and organic deposition. Species abundances were loaded on these axes and niche metrics examined. Strong differences in habitat preference were demonstrated for midge species on each component. Also, there were no differences in distributions for the intraspecific instars for each species tested at a given time, but for each of the instars tested, their distributions were found to change from time to time. Apparently, individuals of a species, regardless of instar, simultaneously choose the same habitat, however, the preferred habitat may shift temporally due to change in resource availability, or niche expansion or compression due to competition.     

Insulin uptake by rat liver endothelium studied in fractionated liver cell suspensions

Summary Cellular distribution of insulin receptors was studied in fractionated rat liver cell suspensions using ¹²⁵1-insulin and a visual probe consisting of latex beads covalently linked to insulin (minibeads). Fractionation was done on metrizamide gradients which yielded two cellular fractions. The large cell fraction consisted mostly of hepatocytes and the small cell fraction consisted of 37% endothelial cells as well as Kupffer cells. The magnitude of insulin uptake by the endothelium-rich small cell fraction was at least double that of the uptake by the hepatocyte-rich fraction. The minibead technique demonstrated that in the small cell fraction only endothelial cells, and not Kupffer cells, were responsible for the insulin uptake. Our findings suggest that liver endothelium may be responsible for the uptake of circulating insulin and its transport to hepatocyte. This emphasizes the presence of a tissue-blood barrier in the liver.Abbreviations PRS phosphate-buffered saline - SEM scanning electron microscopy - TEM transmission electron microscopy     

Molecular cloning of covalently closed circular DNA of bovine leukemia virus

The two species of covalently closed circular DNA molecules of bovine leukemia virus were cloned in the lambda phage vector lambda gtWES X lambda B. Of the nine independent recombinant lambda-bovine leukemia virus clones that were analyzed, three were derived from the small and six were derived from the large circular molecules carrying, respectively, one and two copies of the long terminal repeat sequences. Comprehensive restriction endonuclease mapping of the unintegrated bovine leukemia virus and the cloned DNA molecules showed that eight of the nine clones carried viral information without any detectable deletions or insertions of more than ca. 50 base pairs. One of the nine clones, which carries a retroviral insert with one copy of the long terminal repeat, had a deletion of ca. 150 base pairs.     

The mechanism of inhibition of S-adenosyl-L-homocysteine hydrolase by fluorine-containing adenosine analogs

(Z)-4',5'-Didehydro-5'-deoxy-5'-fluoroadenosine (I), 5'-deoxy-5'-difluoroadenosine (II), and 4',5'-didehydro-5'-deoxy-5'-fluoroarabinosyl-adenosine (III) are inhibitors of rat liver S-adenosyl-L-homocysteine hydrolase. Compounds I and II are time-dependent and irreversible inhibitors of the enzyme. Both I and II are oxidized by E.NAD to produce E.NADH, and fluoride anion is formed in the inactivation reaction (0.7 to 1.0 mole fluoride/mole of enzyme subunit, and 1.7 moles fluoride/mole of enzyme subunit from I and II, respectively). The enzyme is stoichiometrically labeled with [8-3H]-I, but the label is lost upon denaturation of the protein either with or without treatment of the labeled complex with sodium borohydride. The compound III, the arabino derivative of I, is a competitive inhibitor of the enzyme. The mechanism of the inhibition of S-adenosyl-L-homocysteine hydrolase by these inhibitors is discussed.     

Inventory issues in incremental FMS implementation

In recent years, numerous studies have demonstrated convincingly that impressive benefits can be obtained by the adoption of flexible manufacturing systems (FMSs). To obtain the benefits of an FMS requires the development of a completely integrated system. However, FMS implementations are frequently done incrementally through the introduction of subsystems such as flexible machining centers into an existing conventional system. The purpose of this research is to investigate some of the operational issues associated with the introduction of a CNC (computer numerically controlled) machine tool into a conventional system. The primary objective of the present study is to explore the relative effects on inventory holding cost of installing a single CNC at different locations within three different system configurations. Additionally, the study examines the sensitivity of these impacts to changes in (1) System utilization; (2) the ratios of setup times to run times in the conventional work centers; and (3) the rates of increase in holding costs for parts as they move through the system. Results indicated that, in general, introduction of a CNC into an otherwise conventional system reduces inventory holding cost for the system as a whole. However, the degree of this reduction varies depending on the position of the CNC in the system. In some cases the reduction in inventory holding cost is substantial, while in other cases it is relatively small.