Sensitive non-radioactive determination of aminotransferase stereospecificity for C-4' hydrogen transfer on the coenzyme

A sensitive non-radioactive method for determination of the stereospecificity of the C-4′ hydrogen transfer on the coenzymes (pyridoxal phosphate, PLP; and pyridoxamine phosphate, PMP) of aminotransferases has been developed. Aminotransferase of unknown stereospecificity in its PLP form was incubated in ²H₂O with a substrate amino acid resulted in PMP labeled with deuterium at C-4′ in the pro-S or pro-R configuration according to the stereospecificity of the aminotransferase tested. The [4′-²H]PMP was isolated from the enzyme protein and divided into two portions. The first portion was incubated in aqueous buffer with apo-aspartate aminotransferase (a reference si-face specific enzyme), and the other was incubated with apo-branched-chain amino acid aminotransferase (a reference re-face specific enzyme) in the presence of a substrate 2-oxo acid. The ²H at C-4′ is retained with the PLP if the aminotransferase in question transfers C-4′ hydrogen on the opposite face of the coenzyme compared with the reference aminotransferase, but the ²H is removed if the test and reference aminotransferases catalyze hydrogen transfer on the same face. PLP formed in the final reactions was analyzed by LC–MS/MS for the presence or absence of ²H. The method was highly sensitive that for the aminotransferase with ca. 50 kDa subunit molecular weight, only 2 mg of the enzyme was sufficient for the whole test. With this method, the use of radioactive substances could be avoided without compromising the sensitivity of the assay.     

Localization and characterization of inclusion bodies in recombinant Escherichia coli cells overproducing penicillin G acylase

Various concentrations of isopropyl β-d-thiogalactopyranoside (IPTG) were used to induce production of the enzyme penicillin G acylase by recom binant Escherichia coli harboring plasmid pQEA11. The plasmid pQEA11 carries a wild-type pga gene, which is under the control of the tac promoter and lacI ^q. At low IPTG concentrations (0.025 – 0.1 mM), enzyme activity increased with increasing IPTG concentrations. At higher IPTG concentrations (0.2 and 0.5 mM), enzyme activity declined progressively. Examination of induced recombinant E. coli cells by transmission electron microscopy showed the presence of only periplasmic inclusion bodies at low IPTG concentrations (up to 0.1 mM) and both periplasmic and cytoplasmic inclusion bodies at high IPTG concentrations (0.2 mM and 0.5 mM). Results from sodium dodecyl sulfate/polyacrylamide gel electrophoresis and immunoblots of whole-cell proteins, membrane proteins and inclusion body proteins in these cells indicated that cytoplasmic inclusion bodies constituted an accumulation of preproenzyme (i.e., precursor polypeptide containing a signal peptide) and that periplasmic inclusion bodies constituted an accumulation of proenzyme (i.e., precursor polypeptide lacking a signal peptide). Received: 27 March 1996 / Received revision: 2 July 1996 / Accepted: 10 November 1996     

Cloning and expression of penicillin acylase genes from overproducing strains of Escherichia coli and Bacillus megaterium

Summary Penicillin acylase genes from Escherichia coli 194, of an overproducing mutant (194-3) of this strain, and of a similar overproducing mutant of Bacillus megaterium UN1 were cloned in E. coli DH1 on the plasmid vector pACYC184. The sizes of chromosomal DNA fragments essential for penicillin acylase production were found by Tn1000 mutagenesis and in vitro deletions to be between 2.2 and 2.5 kb in the case of both E. coli genes and between 2.3 and 2.7 kb in the case of the mutant Bacillus gene. Restriction mapping indicated substantial sequence differences between the E. coli and B. megaterium penicillin acylase genes. Enzyme production in E. coli recombinants from both overproducing mutants was found to be constitutive and higher than in the original strains. The Bacillus penicillin acylase was produced intracellularly in E. coli recombinants, which is in contrast to the normal extracellular production of this enzyme in B. megaterium. Recombinant plasmids containing penicillin acylase genes from either source were found to be unstable in the absence of selection pressure for retention of the vector.     

Characterization,gene cloning,and heterologous expression of β-mannanase from a thermophilic <Emphasis Type="Italic">Bacillus subtilis</Emphasis>

Bacillus subtilis BCC41051 producing a thermostable β-mannanase was isolated from soybean meal-enriched soil and was unexpectedly found to be thermophilic in nature. The extracellular β-mannanase (ManA) produced was hydrophilic, as it was not precipitated even with ammonium sulfate at 80% saturation. The estimated molecular weight of ManA was 38.0 kDa by SDS-PAGE with a pi value of 5.3. Optimal pH and temperature for mannan-hydrolyzing activity was 7.0 and 60°C, respectively. The enzyme was stable over a pH range of 5.0–11.5, and at temperatures of up to 60°C for 30 min, with more than 80% of its activity retained. ManA was strongly inhibited by Hg²⁺ (1 mM), but was sensitive to other divalent ions to a lesser degree. The gene of ManA encoded a protein of 362 amino acid residues, with the first 26 residues identified as a signal peptide. High expression of recombinant ManA was achieved in both Escherichia coli BL21 (DE3) (415.18 U/ml) and B. megaterium UNcat (359 U/ml).     

Controlled-release biocatalysis for the synthesis of D-phenylglycine

An isolated and immobilised aminotransferase cloned from Pseudomonas stutzeri ST-201 into Escherichia coli was used to synthesise d-phenylglycine. The reaction was characterised by an unfavourable equilibrium constant and substrate inhibition. The use of a controlled-release system via the use of Amberlite (IRA 400)-adsorbed benzoylformate proved a useful technique to circumvent these issues. This resulted in a four-fold improvement in product concentration achievable to yield a final d-phenylglycine concentration of 10.25 mg/ml.     

A Thermostable phytase from <Emphasis Type="Italic">Neosartorya spinosa</Emphasis> BCC 41923 and its expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A phytase gene was cloned from Neosartorya spinosa BCC 41923. The gene was 1,455 bp in size, and the mature protein contained a polypeptide of 439 amino acids. The deduced amino acid sequence contains the consensus motif (RHGXRXP) which is conserved among phytases and acid phosphatases. Five possible disulfide bonds and seven potential N-glycosylation sites have been predicted. The gene was expressed in Pichia pastoris KM71 as an extracellular enzyme. The purified enzyme had specific activity of 30.95 U/mg at 37°C and 38.62 U/mg at 42°C. Molecular weight of the deglycosylated recombinant phytase, determined by SDS-PAGE, was approximately 52 kDa. The optimum pH and temperature for activity were pH 5.5 and 50°C. The residual phytase activity remained over 80% of initial activity after the enzyme was stored in pH 3.0 to 7.0 for 1 h, and at 60% of initial activity after heating at 90°C for 20 min. The enzyme exhibited broad substrate specificity, with phytic acid as the most preferred substrate. Its K _m and V _max for sodium phytate were 1.39 mM and 434.78 U/mg, respectively. The enzyme was highly resistant to most metal ions tested, including Fe²⁺, Fe³⁺, and Al³⁺. When incubated with pepsin at a pepsin/phytase ratio of 0.02 (U/U) at 37°C for 2 h, 92% of its initial activity was retained. However, the enzyme was very sensitive to trypsin, as 5% of its initial activity was recovered after treating with trypsin at a trypsin/phytase ratio of 0.01 (U/U).     

Effective improvement of d-phenylglycine aminotransferase solubility by protein crystal contact engineering

Structure-guided genetic engineering of D-phenylglycine aminotransferase (D-PhgAT) aimed at increasing protein solubility was attempted. In silico analyses predicted the Asn439 and Gln444 as highly solvent-exposed β-turn residues involved with protein crystal contact (CC) potential candidates for solubility-improving mutations. They were replaced with Asp and Glu creating the N439D and Q444E single mutants, and N439D/Q444E double mutant with 2.5-, 3.3- and 5.9-fold increases in solubility, respectively. The protein CC prevention effect rather than the net charge effect accounted for the dramatically improved solubility since the N439D, Q444E and N439D/Q444E mutations altered the isoelectric point of D-PhgAT by only 0.1, 0.1 and 0.3 units, respectively. Examination of the D-PhgAT structural model revealed that the N439D mutation weakened the CC attraction force and the Q444E mutation created electrostatic repulsion at the CC point. Analysis of circular dichroism spectra, melting temperature, and D-PhgAT-specific activity showed that the mutations posed no unfavorable effect on the conformational stability and catalytic performance of the enzyme. The protein solubility-improving strategy employed on D-PhgAT in this study was successful with minimal protein structure modification required. It should be applicable with a high chance of success for other proteins, especially those with 3-D structural models available.     

Simple screening method for isolation of penicillin acylase-producing bacteria

A new screening method for bacteria capable of producing penicillin acylase is described. The method is based on the use of Serratia marcescens sensitive to 6-aminopenicillanic acid but comparatively resistant to benzylpenicillin. It is simple, quite specific, and requires no special equipment. It can also be used to screen for phenoxymethylpenicillin acylase activity. We also suggest an acidimetric method for rapid detection of cloned genes in genetic engineering studies of penicillin acylase.     

High expression of the penicillin G acylase gene (pac) from Bacillus megaterium UN1 in its own pac minus mutant

By marker exchange mutagenesis, Bacillus megaterium strain UN-1 (Bm-UN1) was used to prepare a mutant strain B. megaterium UN-cat (Bm-UNcat) lacking the penicillin G acylase gene (pac). The pac gene from Bm-UN1 was subcloned into pTF6 and the resultant plasmid, pBA402, was introduced into Bm-UNcat and Bacillus subtilis. Bm-UNcat harbouring pBA402 produced high penicillin G acylase (PAC) activity of 13.7, 19.5 and 20.4 U ml(-1) at 24, 36 and 48 h of culture, respectively. This was two- to fivefold higher than PAC produced by B. subtilis harbouring pBA402 and about 20-fold higher than PAC produced by the parent strain, Bm-UN1.