Maintenance of the cellobiose utilization genes of Escherichia coli in a cryptic state

The genes for cellobiose utilization are normally cryptic in Escherichia coli. The cellobiose system was used as a model to understand the process by which silent genes are maintained in microbial populations. Previously reported was (1) the isolation of a mutant strain that expresses the cellobiose-utilization (Cel) genes and (2) that expression of those genes allows utilization of three beta- glucoside sugars: cellobiose, arbutin, and salicin. The Cel gene cluster has now been cloned from that mutant strain. In the course of locating the Cel genes within the cloned DNA segment, it was discovered that inactivation of the Cel-encoded hydrolase rendered the host strain sensitive to all three beta-glucosides as potent inhibitors. This sensitivity arises from the accumulation of the phosphorylated beta- glucosides. Because even the fully active genes conferred some degree of beta-glucoside sensitivity, the effects of cellobiose on a series of five Cel+ mutants of independent origin were investigated. Although each of those strains utilizes cellobiose as a sole carbon and energy source, cellobiose also acts as a potent inhibitor that reduces the growth rate on glycerol 2.5-16.5-fold. On the other hand, wild-type strains that cannot utilize cellobiose are not inhibited. The observation that the same compound can serve either as a nutrient or as an inhibitor suggests that, under most conditions in which cellobiose will be present together with other resources, there is a strong selective advantage to having the cryptic (Cel0) allele. In those environments in which cellobiose is the sole, or the best, resource, mutants that express the genes (Cel+) will have a strong selective advantage. It is suggested that temporal alternation between these two conditions is a major factor in the maintenance of these genes in E. coli populations. This alternation of environments and fitnesses was predicted by the model for cryptic-gene maintenance that was previously published.      

From microbial gene essentiality to novel antimicrobial drug targets

Background

Bacterial respiratory tract infections, mainly caused by Streptococcus pneumoniae, Haemophilus influenzae and Moraxella catarrhalis are among the leading causes of global mortality and morbidity. Increased resistance of these pathogens to existing antibiotics necessitates the search for novel targets to develop potent antimicrobials.

Result

Here, we report a proof of concept study for the reliable identification of potential drug targets in these human respiratory pathogens by combining high-density transposon mutagenesis, high-throughput sequencing, and integrative genomics. Approximately 20% of all genes in these three species were essential for growth and viability, including 128 essential and conserved genes, part of 47 metabolic pathways. By comparing these essential genes to the human genome, and a database of genes from commensal human gut microbiota, we identified and excluded potential drug targets in respiratory tract pathogens that will have off-target effects in the host, or disrupt the natural host microbiota. We propose 249 potential drug targets, 67 of which are targets for 75 FDA-approved antimicrobials and 35 other researched small molecule inhibitors. Two out of four selected novel targets were experimentally validated, proofing the concept.

Conclusion

Here we have pioneered an attempt in systematically combining the power of high-density transposon mutagenesis, high-throughput sequencing, and integrative genomics to discover potential drug targets at genome-scale. By circumventing the time-consuming and expensive laboratory screens traditionally used to select potential drug targets, our approach provides an attractive alternative that could accelerate the much needed discovery of novel antimicrobials.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-958) contains supplementary material, which is available to authorized users.     

Fracture prevention in COPD patients; a clinical 5-step approach

Although osteoporosis and its related fractures are common in patients with COPD, patients at high risk of fracture are poorly identified, and consequently, undertreated. Since there are no fracture prevention guidelines available that focus on COPD patients, we developed a clinical approach to improve the identification and treatment of COPD patients at high risk of fracture. We organised a round-table discussion with 8 clinical experts in the field of COPD and fracture prevention in the Netherlands in December 2013. The clinical experts presented a review of the literature on COPD, osteoporosis and fracture prevention. Based on the Dutch fracture prevention guideline, they developed a 5-step clinical approach for fracture prevention in COPD. Thereby, they took into account both classical risk factors for fracture (low body mass index, older age, personal and family history of fracture, immobility, smoking, alcohol intake, use of glucocorticoids and increased fall risk) and COPD-specific risk factors for fracture (severe airflow obstruction, pulmonary exacerbations and oxygen therapy). Severe COPD (defined as postbronchodilator FEV₁ < 50% predicted) was added as COPD-specific risk factor to the list of classical risk factors for fracture. The 5-step clinical approach starts with case finding using clinical risk factors, followed by risk evaluation (dual energy X-ray absorptiometry and imaging of the spine), differential diagnosis, treatment and follow-up. This systematic clinical approach, which is evidence-based and easy-to-use in daily practice by pulmonologists, should contribute to optimise fracture prevention in COPD patients at high risk of fracture.     

Variable clinical responses of a scrub typhus outbred mouse model to feeding by Orientia tsutsugamushi infected mites

Rodents are the natural hosts for Leptotrombidium mites that transmit Orientia tsutsugamushi, the causative agent of scrub typhus, a potentially fatal febrile human disease. Utilizing mite lines that included O. tsutsugamushi infected and non-infected Leptotrombidium species we investigated the varied infection response of outbred mice (ICR) exposed to L. chiangraiensis (Lc), L. imphalum (Li) and L. deliense (Ld). Each of six mite lines (Lc1, Lc5, Li3, Li4, Li7 and Ld) was separately placed in the inner ears of ICR mice either as a single individual (individual feeding, IF) or as a group of 2-4 individuals (pool feeding, PF). The species of infected chigger feeding on mice significantly affected mortality rates of the mice, with mite lines of Lc causing higher mean (±SE) mortality (90.7 ± 3.6 %) than mite lines of Li (62.9 ± 5.6 %) or Ld (53.6 ± 5.8 %). Mouse responses which included time to death, food consumption and total mice weight change depended on mite species and their O. tsutsugamushi genotype, more than on feeding procedure (IF vs. PF) except for mite lines within the Lc. Infected mite lines of Lc were the most virulent infected mites assessed whereas the infected Ld species was the least virulent for the ICR. Mice killed by various mite lines showed enlarged spleens and produced ascites. The results of this investigation of the clinical responses of ICR mice to feeding by various infected mite lines indicated that the different species of infected mites and their O. tsutsugamushi genotype produced different clinical presentations in ICR mice, a scrub typhus mouse model which mimics the natural transmission of O. tsutsugamushi that is critical for understanding scrub typhus disease in terms of natural transmission, host-pathogen-vector interaction and vaccine development.     

Ice premelting during differential scanning calorimetry

Premelting at the surface of ice crystals is caused by factors such as temperature, radius of curvature, and solute composition. When polycrystalline ice samples are warmed from well below the equilibrium melting point, surface melting may begin at temperatures as low as -15 degrees C. However, it has been reported (. Biophys. J. 65:1853-1865) that when polycrystalline ice was warmed in a differential scanning calorimetry (DSC) pan, melting began at about -50 degrees C, this extreme behavior being attributed to short-range forces. We show that there is no driving force for such premelting, and that for pure water samples in DSC pans curvature effects will cause premelting typically at just a few degrees below the equilibrium melting point. We also show that the rate of warming affects the slope of the DSC baseline and that this might be incorrectly interpreted as an endotherm. The work has consequences for DSC operators who use water as a standard in systems where subfreezing runs are important.     

Gene and domain duplication in the chordate Otx gene family: insights from amphioxus Otx

We report the genomic organization and deduced protein sequence of a cephalochordate member of the Otx homeobox gene family (AmphiOtx) and show its probable single-copy state in the genome. We also present molecular phylogenetic analysis indicating that there was single ancestral Otx gene in the first chordates which was duplicated in the vertebrate lineage after it had split from the lineage leading to the cephalochordates. Duplication of a C-terminal protein domain has occurred specifically in the vertebrate lineage, strengthening the case for a single Otx gene in an ancestral chordate whose gene structure has been retained in an extant cephalochordate. Comparative analysis of protein sequences and published gene expression patterns suggest that the ancestral chordate Otx gene had roles in patterning the anterior mesendoderm and central nervous system. These roles were elaborated following Otx gene duplication in vertebrates, accompanied by regulatory and structural divergence, particularly of Otx1 descendant genes.      

The Distribution and Diversity of Bartonella Species in Rodents and Their Ectoparasites across Thailand

Our study highlights the surveillance of Bartonella species among rodents and their associated ectoparasites (ticks, fleas, lice, and mites) in several regions across Thailand. A total of 619 rodents and 554 pooled ectoparasites (287 mite pools, 62 flea pools, 35 louse pools, and 170 tick pools) were collected from 8 provinces within 4 regions of Thailand. Bandicota indica (279), Rattus rattus (163), and R. exulans (96) were the most prevalent species of rats collected in this study. Real-time PCR assay targeting Bartonella-specific ssrA gene was used for screening and each positive sample was confirmed by PCR using nuoG gene. The prevalence of Bartonella DNA in rodent (around 17%) was recorded in all regions. The highest prevalence of Bartonella species was found in B. savilei and R. rattus with the rate of 35.7% (5/14) and 32.5% (53/163), respectively. High prevalence of Bartonella-positive rodent was also found in B. indica (15.1%, 42/279), and R. norvegicus (12.5%, 5/40). In contrast, the prevalence of Bartonella species in ectoparasites collected from the rats varied significantly according to types of ectoparasites. A high prevalence of Bartonella DNA was found in louse pools (Polyplax spp. and Hoplopleura spp., 57.1%) and flea pools (Xenopsylla cheopis, 25.8%), while a low prevalence was found in pools of mites (Leptotrombidium spp. and Ascoschoengastia spp., 1.7%) and ticks (Haemaphysalis spp., 3.5%). Prevalence of Bartonella DNA in ectoparasites collected from Bartonella-positive rodents (19.4%) was significantly higher comparing to ectoparasites from Bartonella-negative rodents (8.7%). The phylogenetic analysis of 41 gltA sequences of 16 Bartonella isolates from rodent blood and 25 Bartonella-positive ectoparasites revealed a wide range of diversity among Bartonella species with a majority of sequences (61.0%) belonging to Bartonella elizabethae complex (11 rodents, 1 mite pool, and 5 louse pools), while the remaining sequences were identical to B. phoceensis (17.1%, 1 mite pool, 5 louse pools, and 1 tick pool), B. coopersplainensis (19.5%, 5 rodents, 1 louse pool, and 2 tick pools), and one previously unidentified Bartonella species (2.4%, 1 louse pool).     

Quantification of the magnification and distortion effects of a pediatric flexible video-bronchoscope

Background

Flexible video bronchoscopes, in particular the Olympus BF Type 3C160, are commonly used in pediatric respiratory medicine. There is no data on the magnification and distortion effects of these bronchoscopes yet important clinical decisions are made from the images. The aim of this study was to systematically describe the magnification and distortion of flexible bronchoscope images taken at various distances from the object.

Methods

Using images of known objects and processing these by digital video and computer programs both magnification and distortion scales were derived.

Results

Magnification changes as a linear function between 100 mm (×1) and 10 mm (×9.55) and then as an exponential function between 10 mm and 3 mm (×40) from the object. Magnification depends on the axis of orientation of the object to the optic axis or geometrical axis of the bronchoscope. Magnification also varies across the field of view with the central magnification being 39% greater than at the periphery of the field of view at 15 mm from the object. However, in the paediatric situation the diameter of the orifices is usually less than 10 mm and thus this limits the exposure to these peripheral limits of magnification reduction. Intraclass correlations for measurements and repeatability studies between instruments are very high, r = 0.96. Distortion occurs as both barrel and geometric types but both types are heterogeneous across the field of view. Distortion of geometric type ranges up to 30% at 3 mm from the object but may be as low as 5% depending on the position of the object in relation to the optic axis.

Conclusion

We conclude that the optimal working distance range is between 40 and 10 mm from the object. However the clinician should be cognisant of both variations in magnification and distortion in clinical judgements.