Direct membrane effects of morphine and endorphins on Amoeba proteus.

Morphine, leu-enkephalinamide, met-enkephalin, alpha-neoendorphin and its Arg8 1-8 fragment increase contractile vacuole output in the freshwater Amoeba proteus at 18 microM. Significant effects of leu-enkephalin and naloxone are obtained at 180 microM. All compounds have reached their maximal activity at 720 microM. Alpha-neoendorphin and leu-enkephalin are inactive in the presence of isotonic, non-penetration sucrose, hence these compounds increase plasma membrane permeability to water. Results from molecular modeling show a clear correlation of activity with amphiphilicity, charge distribution and general flexibility of molecules. We conclude that, like previously-studied vasopressin analogues and non-hormonal amphiphilic peptides, active opioids embed themselves into the Amoeba plasma membrane, disrupting the lipid bilayer and increasing its permeability. In our Amoeba system, naloxone, a general morphine-like inhibitor, blocks active opioids as well as a vasopressin analogue. Naloxone, being less active than other tested amphiphiles, acts as a membrane stabilizer, protecting the lipid bilayer against the disruption action of more active compounds.     

Selective solubilization of xylan in pulp using a purified xylanase fromTrichoderma harzianum

Summary The specificity of action of a cellulase-free xylanase preparation on pulp fibers was revealed by the composition of the solubilized products after enzyme treatment. The neutral carbohydrates released by the treatment of two hardwood kraft pulps were composed exclusively of xylooligomers. A similar treatment of Solka Floc showed no detrimental effect on the degree of polymerization of the cellulose fibers, as determined by size exclusion chromatographic analysis.     

Treatment of canine aspiration pneumonitis: fluid volume reduction vs. fluid volume expansion

The aspiration of gastric acid causes pulmonary edema and hypoxemia. One approach to the management of this syndrome is to raise cardiac output (Qt) and O2 delivery (QO2) to ensure tissue oxygenation (VO2) at the risk of increasing the edema. Another approach reduces the edema by reducing pulmonary microvascular pressure (Pmv) at the risk of reducing QO2 and VO2. We compared these approaches in 24 anesthetized, ventilated dogs with pulmonary wedge pressure (Ppw), a clinical approximation of Pmv, of 12.5 mmHg. Before and again 1 h after endobronchial instillation of 0.1 N HCl, we measured Qt, QO2, VO2, venous admixture, and in vivo extravascular lung liquid. The dogs were then randomly divided into four equal groups: 1) 12.5 mmHg Ppw, high Qt; 2) 7.5 mmHg Ppw, intermediate Qt; 3) 4.5 mmHg Ppw, low Qt; and 4) 4.5 mmHg Ppw plus dopamine, intermediate Qt. Measured values were followed for 4 more h, after which the lungs were excised to compare wet weight-to-body weight ratios (W/B). When plasmapheresis reduced Ppw at 1 h, edema did not increase further and W/B of groups 2 (21 +/- 3), 3 (18 +/- 3), and 4 (22 +/- 3) were significantly less than in group 1 (27 +/- 3) (P less than 0.001). Although Qt decreased with Ppw, increased hematocrit and reduced venous admixture maintained QO2 in group 2 but not in group 3. In group 4 an intermediate Qt maintained QO2 even at 4.5 mmHg Ppw but edema increased to the group 2 level presumably because Pmv rose with Qt on dopamine. VO2 remained constant over time in each group. These data demonstrate that canine HCl-induced pulmonary edema, measured in vivo or gravimetrically, is very sensitive to reductions in Pmv. Moreover, the lowest Pmv (and QO2) was well tolerated because an O2 supply dependency of VO2 was not observed.     

Antibody response of BALB/c mice to dextran B1355S: alterations in the expression of an idiotype associated with the depletion of idiotype-binding cells

In this study, we established that BALB/c mice recognize and respond to the idiotype (M104E IdI) of a major dextran-specific clonotype within the BALB/c mouse repertoire. This idiotype recognition is established by demonstrating the presence of idiotype-binding cells and by the production of antibodies specific for the private M104E idiotype. To determine whether or not the idiotype-recognizing cells play a regulatory role during an immune response to dextran, the idiotype-binding cells were selectively removed either by panning or by radiation-induced killing. Two significant effects are observed when the depleted spleen cells are immunized with dextran. First, there is a substantial increase in the proportion of anti-dextran antibodies that are M104E IdI+. The second effect of the idiotype-specific cell depletion is the production of significant amounts of M104E IdI+ immunoglobulin molecules which do not bind dextran. The depletion experiments produced no alteration in the concentration of anti-dextran antibodies found in the serum or in the number of dextran-specific PFC in the spleen. The data indicate that idiotype-reactive cells can play a role in regulating the level of individual clonotype expression (i.e., the M104E clonotype), but that an alternative mechanism must exist for regulating the absolute amount of anti-dextran antibody produced after immunization.     

Failure of PFC inhibition assays to distinguish idiotypically between clonotypes that are readily distinguishable by RIA analysis

Two different hemolytic plaque assay protocols that are commonly used to quantitate idiotype-positive antibody-secreting cells have been compared to a standard radioimmunoassay (RIA) to test for their ability to discriminate between related, but idiotypically distinct, clonotypes. The idiotype proband used in this analysis is the individual specific idiotype associated with the dextran-binding myeloma protein M104E (M104E IdI). Antibodies specific for this private idiotype (anti-M104E IdI) were purified by a combination of adsorption and affinity chromatography of the immunoglobulin fraction isolated from the sera of rabbits repeatedly immunized with M104E. The same affinity-purified anti-M104E IdI antibodies were used in the hemolytic plaque assays and in the RIA. In one of the plaque assays, the putative idiotype-positive antibody-forming cells were scored by lysis of target erythrocytes to which the anti-idiotype had been covalently coupled. In the other plaque assay, the idiotype-positive cells were determined indirectly by anti-idiotype inhibition of PFC produced on dextran-coupled target erythrocytes. The fidelity of these two assays to quantitate the M104E private idiotype expression in individual BALB/c mice after a single immunization with dextran B-1355S was determined by comparing the plaque assay data to the data generated by a double-antibody, post-precipitation RIA of either the antibodies in the serum or of monoclonal antibodies produced by hybridomas. Our data indicate that both plaque assay protocols reflect an overestimate of the actual expression of M104E private idiotype. By using a library of dextran-specific hybridomas (that have been characterized in an RIA with respect to their M104E IdI cross-reactivity), we have shown that the PFC overestimate of the M104E expression observed in dextran-immune mice is due to the inability of both plaque assay protocols to distinguish between dextran-specific clonotypes that express idiotypes cross-reactive with, but not identical to, the 104E IdI. We conclude that the plaque assay should be used only in conjunction with an RIA to estimate the idiotype expression. This is especially true in situations where closely related cross-reactive idiotype families exist.     

Column cellulose hydrolysis reactor: Cellulase adsorption profile

Summary A column cellulose hydrolysis reactor was set up using a single passage of cellulase enzyme which was followed with a continuous percolation of buffer. Hydrolysis rates were found to decline precipitously upon the removal of the non-adsorbed cellulase components. By comparing specific activities of the cellulase before and after adsorption on the cellulose column, it was concluded that the adsorption efficiencies for the cellulase components decreased from exoglucanase (1,4--d-glucan cellobiohydrolase EC 3.2.1.91) to endoglucanase [1,4-(1,3;1,4)--d-glucan 4-glucanohydrolase, EC 3.2.1.4] to -glucosidase (-d-glucoside glucohydrolase, EC 3.2.1.21). Of the adsorbed cellulase components, the rate of endoglucanase leaching from the cellulose column was 20 times that for the exoglucanase despite the greater adsorption efficiency of the latter. By analysing the cellulase components which were bound and not bound by the cellulose column and comparing them with a purified exoglucanase enzyme on sodium dodecyl sulfate polyacrylamide gels, it was confirmed that the major cellulase component adsorbed to the cellulose column was an exoglucanase component. The resultant loss of other cellulase components from the reactor was probably the cause for the much reduced rate of cellulose hydrolysis when these components were flushed out of the column.     

Molecular drift of the bride of sevenless (boss) gene in Drosophila

DNA sequences were determined for three to five alleles of the bride-of- sevenless (boss) gene in each of four species of Drosophila. The product of boss is a transmembrane receptor for a ligand coded by the sevenless gene that triggers differentiation of the R7 photoreceptor cell in the compound eye. Population parameters affecting the rate and pattern of molecular evolution of boss were estimated from the multinomial configurations of nucleotide polymorphisms of synonymous codons. The time of divergence between D. melanogaster and D. simulans was estimated as approximately 1 Myr, that between D. teissieri and D. yakuba as approximately 0.75 Myr, and that between the two pairs of sibling species as approximately 2 Myr. (The boss genes themselves have estimated divergence times approximately 50% greater than the species divergence times.) The effective size of the species was estimated as approximately 5 x 10(6), and the average mutation rate was estimated as 1-2 x 10(-9)/nucleotide/generation. The ratio of amino acid polymorphisms within species to fixed differences between species suggests that approximately 25% of all possible single-step amino acid replacements in the boss gene product may be selectively neutral or nearly neutral. The data also imply that random genetic drift has been responsible for virtually all of the observed differences in the portion of the boss gene analyzed among the four species.      

The contractile basis of amoeboid movement: V. The control of gelation, solation, and contraction in extracts from dictyostelium discoideum

Motile extracts have been prepared from Dictyostelium discoideum by homogenization and differential centrifugation at 4 degrees C in a stabilization solution (60). These extracts gelled on warming to 25 degrees Celsius and contracted in response to micromolar Ca++ or a pH in excess of 7.0. Optimal gelation occurred in a solution containing 2.5 mM ethylene glycol-bis (β-aminoethyl ether)N,N,N',N'-tetraacetate (EGTA), 2.5 mM piperazine-N-N'-bis [2-ethane sulfonic acid] (PIPES), 1 mM MgC1(2), 1 mM ATP, and 20 mM KCI at ph 7.0 (relaxation solution), while micromolar levels of Ca++ inhibited gelation. Conditions that solated the gel elicited contraction of extracts containing myosin. This was true regardless of whether chemical (micromolar Ca++, pH >7.0, cytochalasin B, elevated concentrations of KCI, MgC1(2), and sucrose) or physical (pressure, mechanical stress, and cold) means were used to induce solation. Myosin was definitely required for contraction. During Ca++-or pH-elicited contraction: (a) actin, myosin, and a 95,000-dalton polypeptide were concentrated in the contracted extract; (b) the gelation activity was recovered in the material sqeezed out the contracting extract;(c) electron microscopy demonstrated that the number of free, recognizable F-actin filaments increased; (d) the actomyosin MgATPase activity was stimulated by 4- to 10-fold. In the absense of myosin the Dictyostelium extract did not contract, while gelation proceeded normally. During solation of the gel in the absense of myosin: (a) electron microscopy demonstrated that the number of free, recognizable F- actin filaments increased; (b) solation-dependent contraction of the extract and the Ca++-stimulated MgATPase activity were reconstituted by adding puried Dictyostelium myosin. Actin purified from the Dictyostelium extract did not gel (at 2 mg/ml), while low concentrations of actin (0.7-2 mg/ml) that contained several contaminating components underwent rapid Ca++ regulated gelation. These results indicated : (a) gelation in Dictyostelium extracts involves a specific Ca++-sensitive interaction between actin and several other components; (b) myosin is an absolute requirement for contraction of the extract; (c) actin-myosin interactions capable of producing force for movement are prevented in the gel, while solation of the gel by either physical or chemical means results in the release of F-actin capable of interaction with myosin and subsequent contraction. The effectiveness of physical agents in producting contraction suggests that the regulation of contraction by the gel is structural in nature.     

Hapten-specific B cell repertoire probed by hybridoma technology: selection and characterization of representative clonotypes from the antibody-forming cell pool

In the course of this study, more than 3000 phthalate-specific antibody-forming cell hybrids were identified using the hybridoma technology. With the aid of a rapid screening assay and an extensive library of phthalate analogs, it was possible to assign selected hapten-specific clones to one of 11 distinct fine-specificity sets. This compartmentalization of the phthalate-specific hybridomas has made it possible to focus attention upon a single manageable portion of the phthalate-specific repertoire. Fourteen clones from a single fine-specificity set were selected for further immunochemical characterization. Five of these clones were found to secrete an antibody that was indistinguishable in isoelectric focusing. Affinity-purified, high-resolution anti-idiotype antibodies were prepared with specificity for the antibodies produced by one of these clones (i.e., 4C7). A major portion of the serologically defined private idiotype (4C7 IdI) was shown to be associated with the ligand-combining site. Our results indicate that the five clones that share a common spectrotype also express the 4C7 IdI. Two other independently derived clones from two distinct fusions also share this idiotype. The 4C7 IdI was also identified in affinity-purified anti-phthalate antibodies derived from a pool of phthalate-immune serum (conventional antibody) and from affinity-purified antibodies derived from a pool of serum from unimmunized BALB/c mice (natural antibody). The 4C7 IdI is thus considered to represent a repeating clonotype in the phthalate-specific repertoire of BALB/c mice, and will serve as one of several useful clonal markers that are being developed for studies of the mechanism regulating idiotype expression.