Differentiation of species in Gonioloboceras

The type specimen ofGonioloboceras goniolobum (Meek), rediscovered by Spath in the British Museum, is the foundation for a more accurate comparative study of this and other species ofGonioloboceras.Gonioloboceras described asG. goniolobum byElias in 1938 is differentiated asGonioloboceras schmidti, new species. Suture sets (new term) for several growth stages inG. goniolobum (Meek),G. welleriSmith,G. schmidtiElias, G.eliasiMiller &Owen, andG. asiaticumLibrovitch are assembled and used for differentiation of the species.The Kazakhstan goniatite faunule containingG. asiaticum is considered of very late Pennsylvanian age.     

The photosynthetic F1-α3β3 and α1β1 catalytic core complexes

Minimal photosynthetic catalytic F₁() core complexes, containing equimolar ratios of the and subunits, were isolated from membrane-bound spinach chloroplast CF₁ and Rhodospirillum rubrum chromatophore RrF₁. A CF₁-₃₃ hexamer and RrF₁-₁₁ dimer, which were purified from the respective F₁() complexes, exhibit lower rates and different properties from their parent F₁-ATPases. Most interesting is their complete resistance to inhibition by the general F₁ inhibitor azide and the specific CF₁ inhibitor tentoxin. These inhibitors were earlier reported to inhibit multisite, but not unisite, catalysis in all sensitive F₁-ATPases and were therefore suggested to block catalytic site cooperativity. The absence of this typical property of all F₁-ATPases in the ₁₁ dimer is consistant with the view that the dimer contains only a single catalytic site. The ₃₃ hexamer contains however all F₁ catalytic sites. Therefore the observation that CF₁-₃₃ can bind tentoxin and is stimulated by it suggests that the F₁ subunit, which is required for obtaining inhibition by tentoxin as well as azide, plays an important role in the cooperative interactions between the F₁-catalytic sites.Abbreviations CF₀F₁ chloroplast F₀F₁ - CF₁ chloroplast F₁ - CF₁ chloroplast F₁ subunit - CF₁ chloroplast F₁ subunit - CF₁() a complex containing equal amounts of the CF₁ and subunits - MF₁ mitochondrial F₁ - RrF₀F₁ Rhodospirillum rubrum F₀F₁ - RrF₁ R. rubrum F₁ - RrF₁ R. rubrum F₁ subunit - RrF₁ R. rubrum F₁ subunit - RrF₁() a complex containing equal amounts of the RrF₁ and subunits - Rubisco Ribulose-1,5-bisphosphate carboxylase - TF₁ thermophilic bacterium PS3 F₁     

Homology modeling by the ICM method

Five models have been built by the ICM method for the Comparative Modeling section of the Meeting on the Critical Assessment of Techniques for Protein Structure Prediction. The targets have homologous proteins with known three-dimensional structure with sequence identity ranging from 25 to 77%. After alignment of the target sequence with the related three-dimensional structure, the modeling procedure consists of two subproblems: side-chain prediction and loop prediction. The ICM method approaches these problems with the following steps: (1) a starting model is created based on the homologous structure with the conserved portion fixed and the noncon-served portion having standard covalent geometry and free torsion angles; (2) the Biased Probability Monte Carlo (BPMC) procedure is applied to search the subspaces of either all the nonconservative side-chain torsion angles or torsion angles in a loop backbone and surrounding side chains. A special algorithm was designed to generate low-energy loop deformations. The BPMC procedure globally optimizes the energy function consisting of ECEPP/3 and solvation energy terms. Comparison of the predictions with the NMR or crystallographic solutions reveals a high proportion of correctly predicted side chains. The loops were not correctly predicted because imprinted distortions of the backbone increased the energy of the near-native conformation and thus made the solution unrecognizable. Interestingly, the energy terms were found to be reliable and the sampling of conformational space sufficient. The implications of this finding for the strategies of future comparative modeling are discussed. © 1995 Wiley-Liss, Inc.     

A Microfluidic Platform for Precision Small-volume Sample Processing and Its Use to Size Separate Biological Particles with an Acoustic Microdevice

A major advantage of microfluidic devices is the ability to manipulate small sample volumes, thus reducing reagent waste and preserving precious sample. However, to achieve robust sample manipulation it is necessary to address device integration with the macroscale environment. To realize repeatable, sensitive particle separation with microfluidic devices, this protocol presents a complete automated and integrated microfluidic platform that enables precise processing of 0.15–1.5 ml samples using microfluidic devices. Important aspects of this system include modular device layout and robust fixtures resulting in reliable and flexible world to chip connections, and fully-automated fluid handling which accomplishes closed-loop sample collection, system cleaning and priming steps to ensure repeatable operation. Different microfluidic devices can be used interchangeably with this architecture. Here we incorporate an acoustofluidic device, detail its characterization, performance optimization, and demonstrate its use for size-separation of biological samples. By using real-time feedback during separation experiments, sample collection is optimized to conserve and concentrate sample. Although requiring the integration of multiple pieces of equipment, advantages of this architecture include the ability to process unknown samples with no additional system optimization, ease of device replacement, and precise, robust sample processing.     

Ceruloplasmin: Macromolecular Assemblies with Iron-Containing Acute Phase Proteins

Copper-containing ferroxidase ceruloplasmin (Cp) forms binary and ternary complexes with cationic proteins lactoferrin (Lf) and myeloperoxidase (Mpo) during inflammation. We present an X-ray crystal structure of a 2Cp-Mpo complex at 4.7 Å resolution. This structure allows one to identify major protein–protein interaction areas and provides an explanation for a competitive inhibition of Mpo by Cp and for the activation of p-phenylenediamine oxidation by Mpo. Small angle X-ray scattering was employed to construct low-resolution models of the Cp-Lf complex and, for the first time, of the ternary 2Cp-2Lf-Mpo complex in solution. The SAXS-based model of Cp-Lf supports the predicted 1∶1 stoichiometry of the complex and demonstrates that both lobes of Lf contact domains 1 and 6 of Cp. The 2Cp-2Lf-Mpo SAXS model reveals the absence of interaction between Mpo and Lf in the ternary complex, so Cp can serve as a mediator of protein interactions in complex architecture. Mpo protects antioxidant properties of Cp by isolating its sensitive loop from proteases. The latter is important for incorporation of Fe³⁺ into Lf, which activates ferroxidase activity of Cp and precludes oxidation of Cp substrates. Our models provide the structural basis for possible regulatory role of these complexes in preventing iron-induced oxidative damage.     

A Resonant System for In Vitro Studies Emulating Wireless Power Transfer Exposure at 13.56 MHz

This paper presents the design of a resonant system for in vitro studies to emulate the exposure of a monolayer of cells to a wireless power transfer system operating at 13.56 MHz. The design procedure targets a system, which maximizes the specific absorption rate (SAR) uniformity on the plane where the layer is cultured, as well as SAR efficiency (defined as SAR over the input power), within the size constraints of a standard incubator. Three resonant wireless power transfer systems with different commonly used loop/coil geometries (cylindrical with circular and square cross-sections and annular) were compared with assess the configuration maximizing the considered design criteria. The system performance in terms of reflection and transmission coefficients, as well as generated E- and H-fields, was characterized numerically and experimentally inside the incubator. Moreover, SAR was computed at the monolayer level. The system equipped with cylindrical coils with square cross-sections led to a high electromagnetic field uniformity in in vitro biological samples. In particular, the uniformities in E and SAR at the layer level were within 7.9% and 5.5%, respectively. This was achieved with the variation in H below the usually considered ±5% limit. © 2020 Bioelectromagnetics Society     

Resilience to Freezing in the Vegetative Cells of the Microalga Lobosphaera incisa (Trebouxiophyceae,Chlorophyta)

The chlorophyte microalga Lobosphaera incisa was isolated from the snowy slopes of Mt. Tateyama in Japan. This microalga stores exceptionally high amounts of the omega-6 LC-PUFA arachidonic acid in triacylglycerols, and therefore represents a potent photosynthetic source for this essential LC-PUFA. Assuming that freezing tolerance may play a role in adaptation of L. incisa to specific ecological niches, we examined the capability of L. incisa to tolerate extreme sub-zero temperatures. We report here, that the vegetative cells of L. incisa survived freezing at −20°C and −80°C (over 1 month), without cryoprotective agents or prior treatments. Cells successfully recovered upon thawing and proliferated under optimal growth conditions (25°C). However, cells frozen at −80°C showed better recovery and lower cellular ROS generation upon thawing, compared to those preserved at −20°C. Photosynthetic yield of PSII, estimated by F_v/F_m, temporarily decreased at day 1 post freezing and resumed to the original level at day 3. Interestingly, the thawed algal cultures produced a higher level of chlorophylls, exceeding the control culture. The polar metabolome of the vegetative cells comprised a range of compatible solutes, dominated by glutamate, sucrose, and proline. We posit that the presence of endogenous cryoprotectants, a rigid multilayer cell wall, the high LC-PUFA content in membrane lipids, and putative cold-responsive proteins may contribute to the retention of functionality upon recovery from the frozen state, and therefore for the survival under cryospheric conditions. From the applied perspective, this beneficial property holds promise for the cryopreservation of starter cultures for research and commercial purposes.     

In-solution hybrid capture of bisulfite-converted DNA for targeted bisulfite sequencing of 174 ADME genes

DNA methylation is one of the most important epigenetic alterations involved in the control of gene expression. Bisulfite sequencing of genomic DNA is currently the only method to study DNA methylation patterns at single-nucleotide resolution. Hence, next-generation sequencing of bisulfite-converted DNA is the method of choice to investigate DNA methylation profiles at the genome-wide scale. Nevertheless, whole genome sequencing for analysis of human methylomes is expensive, and a method for targeted gene analysis would provide a good alternative in many cases where the primary interest is restricted to a set of genes.Here, we report the successful use of a custom Agilent SureSelect Target Enrichment system for the hybrid capture of bisulfite-converted DNA. We prepared bisulfite-converted next-generation sequencing libraries, which are enriched for the coding and regulatory regions of 174 ADME genes (i.e. genes involved in the metabolism and distribution of drugs). Sequencing of these libraries on Illumina’s HiSeq2000 revealed that the method allows a reliable quantification of methylation levels of CpG sites in the selected genes, and validation of the method using pyrosequencing and the Illumina 450K methylation BeadChips revealed good concordance.