Enhanced Thermal Stability and Biocompatibility of Gold Nanorods by Graphene Oxide

In the present study, the effect of nanosized graphene oxide layer on thermal stability and biocompatibility of gold nanorods has been examined. The graphene oxide-wrapped gold nanorods were prepared by electrostatic interaction between negatively charged graphene oxide and positively charged nanorods. The resulting nanohybrids were then heated at different time intervals to 95 °C in a water bath to assess the effect of heat on the rods morphology. The structural changes in gold nanorods were monitored via UV-Vis spectroscopy measurements and transmission electron microscopy images. In similar experiments, the graphene oxide used to wrap gold nanorods was reduced by ascorbic acid in a 95 °C water bath. Our results indicate that while bare gold nanorods are highly vulnerable to elevated temperatures, graphene oxide and reduced graphene oxide-coated gold nanorods remain thermally stable with no structural changes. We also confirmed that the enhanced thermal stability is highly dependent on the concentration of deposited graphene oxide available on the surface of the gold nanorods. In addition, we performed an MTT (3-[4,5-dimethylthiazol-2yl]-2,5-diphenyltetrazoliumbromide) assay to make a comparison between the cytotoxicity of the nanohybrids and their primary building blocks on human dermal fibroblast cells as a normal cell line. We found evidence that graphene oxide can enhance the biocompatibility of the rods through covering toxic chemicals on the surface of them.

Open image in new window

Graphical Abstract ?

     

Removal of heavy metals from industrial wastewater using microbial fuel cell

Removal efficiency of gold from a solution of pure tetrachloroaurate ions was investigated using microbial fuel cell (MFC) technology. The effects of type of catholyte solution and initial gold concentration on the removal efficiency were considered. Due to its presence at high levels in the gold wastewater, the effect of copper ions on the removal efficiency of the gold ions was also studied. The effects of pH and initial biomass concentration on the gold removal efficiency was also determined. The results showed that after 5 h contact time, 95% of gold removal efficiency from a wastewater containing 250 ppm of initial gold ions at ambient temperature using 80 g/L yeast concentration was achieved. After 48 h of the cell''s operation under the same condition, 98.86% of AuCl₄ ^– ions were successfully removed from the solution. At initial gold concentration in the waste solution of 250 ppm, pH 2, and initial yeast concentration of 80 g/L, 100% removal efficiency of the gold was achieved. On the other hand, the most suitable condition for copper removal was found at a pH of 5.2, where 53% removal efficiency from the waste solution was accomplished.     

Contribution of Lithologic and Anthropogenic Factors to Surface Soil Heavy Metals in Western Iran Using Multivariate Geostatistical Analyses

Heavy metals’ origin, accumulation, and distribution in soil have been the focus of much attention by many researchers. The objective of this study was to recognize the sources of heavy metals in surface soils in Hamadan Province in western Iran using multivariate geostatistical techniques. A total of 263 surface (0–10 cm) soil samples and 18 rock samples from major parent materials were collected. Cobalt (Co), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn) contents of the samples were determined. Selected soil physical and chemical characteristics were also measured. A multivariate geostatistical analysis was performed to identify the common source of heavy metals. The quantities of Co, Cr, and Ni were found to be associated with parent rocks, corresponding to the first factor termed the “lithologic component.” The second factor was mainly attributed to Cu, which also comprised the first and third factors, indicating a mixed source both from lithologic and anthropogenic inputs. Zn and Pb contents were related to the anthropogenic activities and comprised the third factor. A significant correlation was found between metals from the lithogenic sources and selected soil properties such as soil organic matter, clay, CEC, and carbonate, indicating an interaction among them. Generally, Zn and Pb showed a less significant correlation with soil properties.     

Utilization of the human gamma-satellite insulator for the enhancement of anti-PCSK9 monoclonal antibody expression in Chinese hamster ovary cells

Molecular Biology Reports - Monoclonal antibodies (mAbs) are widely employed as invaluable therapeutics for a vast number of human disorders. Several approaches have been introduced for the...     

Increasing the quality of services and resource utilization in vehicular cloud computing using best host selection methods

One of the technology for increasing the safety and welfare of humans in roads is Vehicular Cloud Computing (VCC). This technology can utilize cloud computing advantages in the Vehicular Ad Hoc Network (VANET). VCC by utilizing modern equipment along with current vehicles, can play a significant role in the area of smart transportation systems. Given the potential of this technology, effective methods for managing existing resources and providing the expected service quality that is essential for such an environment are not yet available as it should. One of the most important barriers to providing such solutions seems to be resource constraints and very high dynamics in vehicles in VCC. In this article, based on virtualization and taking into account the environment with these features, we propose simple ways to manage resources better and improve the quality of service. We were able to achieve better results in simulation than previous methods by providing a flexible data structure to control the important data in the environment effectively. To illustrate the impact of the proposed methods, we compared them with some of the most important methods in this context, and we used SUMO 1.2.0 and MATLAB R2019a software to simulate them. Simulation results indicate that the proposed methods provide better results than previous methods in terms of resource efficiency, Quality of Service (QoS), and load balancing.

     

Cytosolic phospholipase A2α sustains pAKT,pERK and AR levels in PTEN-null/mutated prostate cancer cells

Constitutive phosphorylation of protein kinase B (AKT) is a common feature of cancer caused by genetic alteration in the phosphatase and tensin homolog (PTEN) gene and is associated with poor prognosis. This study determined the role of cytosolic phospholipase A₂α (cPLA₂α) in AKT, extracellular signal-regulated kinase (ERK) and androgen receptor (AR) signaling in PTEN-null/mutated prostate cancer cells. Doxycycline (Dox)-induced expression of cPLA₂α led to an increase in pAKT, pGSK3β and cyclin D1 levels in LNCaP cells that possess a PTEN frame-shift mutation. In contrast, silencing cPLA₂α expression with siRNA decreased pAKT, pGSK3β and cyclin D1 levels in both PC-3 (PTEN deletion) and LNCaP cells. Silencing of cPLA₂α decreased pERK and AR protein levels. The inhibitory effect of cPLA₂α siRNA on pAKT and AR protein levels was reduced by the addition of arachidonic acid (AA), whereas the stimulatory effect of AA on pAKT, pERK and AR levels was decreased by an inhibitor of 5-hydroxyeicosatetraenoic acid production. Pharmacological blockade of cPLA₂α with Efipladib reduced pAKT and AR levels with a concomitant inhibition of PC-3 and LNCaP cell proliferation. These results demonstrate an important role for cPLA₂α in sustaining AKT, ERK and AR signaling in PTEN-null/mutated prostate cancer cells and provide a potential molecular target for treating prostate cancer.     

Hepatitis C virus genotypes in patients with chronic hepatitis C infection in southern Iran from 2016 to 2019

Hepatitis C is a liver disease caused by the hepatitis C virus (HCV). The treatment of HCV infection has become more complicated due to various genotypes and subtypes of HCV. The treatment of HCV has made significant advances with direct-acting antivirals. However, for the choice of medicine or the combination of drugs for hepatitis C, it is imperative to detect and discriminate the crucial HCV genotypes. The main objective of this study was to determine the pattern of circulating HCV genotypes in southern Iran, from 2016 until 2019. The other aim of the study was to determine possible associations of patients’ risk factors with HCV genotypes. A total of 803 serum samples were collected in 4 years (2016–2019) from patients with HCV antibody positive results. A total of 728 serum samples were HCV-RNA positive. The prevalence of HCV genotypes was detected using the genotype-specific RT-PCR test for serum samples obtained from 615 patients. The HCV genotype 1 (G1) was the most prevalent (48.8%) genotype in the area, with G1a, G1b, and mixed G1a/b representing 38.4%, 10.1%, and 0.3%, respectively. Genotype 3a was the next most prevalent (47.2%). Mixed genotypes 1a/3a were detected in 22 (3.6%) and finally G4 was found in 3 (0.5%) patients. The other HCV genotypes were not detected in any patient. Genotype 1 (1a and 1b alone, 1a/1b and 1a/3a coinfections) is the most prevalent HCV genotype in southern Iran. HCV G1 shows a significantly higher rate in people under 40 years old.     

The removal of ρ-chlorophenol in aqueous cultures with free and alginate-immobilized cells of the microalga Tetraselmis suecica

The present study aimed at evaluating the ability of some isolated cyanobacterial and microalgal strains for the removal of ρ-chlorophenol (ρ-CP), an environmentally harmful contaminant. To identify the most efficient species, a screening program was carried out using 15 microalgal and cyanobacterial strains. Among them, Tetraselmis suecica was able to remove 67 % of the ρ-chlorophenol at an initial concentration of 20 mg L^?1 from the medium within a 10-day period. The efficacy of the process was dependent on the ρ-chlorophenol concentration. At concentrations above 60 mg L^?1 of the pollutant, no removal was observed due to the inhibitory effect of ρ-chlorophenol on the T. suecica cells. The effect of cell immobilization in alginate beads on T. suecica removal capacity was also examined. Using this technique, the removal efficacy for the initial ρ-CP concentration of 20 mg L^?1 increased up to 94 %.     

Agitation increases expansion of cord blood hematopoietic cells and promotes their differentiation into myeloid lineage

Mechanical stress caused by agitation is one of the factors that can affect hematopoietic stem cell expansion in suspension bioreactors. Therefore, we have investigated the effects of agitation on umbilical cord blood hematopoietic stem cell (UCB-HSC) growth and differentiation. A comparison was made between various agitation rates (20, 40 and 60 rpm) in spinner-flask and cells cultured in glass petri dish as a static culture. Moreover, the fluid dynamic at various agitation rates of spinner-flask was analyzed to determine shear stress. The spinner-flask contained a rotational moving mixer with glass ball and was kept in tissue culture incubator. To reduce consumption of cytokines, UCB-serum was used which widely decreased the costs. Our results determined that, agitation rate at 40 rpm promoted UCB-HSCs expansion and their colony forming potential. Myeloid progenitors were the main type of cells at 40 rpm agitation rate. The results of glucose consumption and lactic acid production were in complete agreement with colony assay and expansion data and indicated the superiority of culture in spinner-flask when agitated at 40 rpm over to other agitation speeds and also static culture. Cell viability and colony count was affected by changing the agitation speed. We assume that changes in cell growth resulted from the effect of shear stress directly on cell viability, and indirectly on signaling pathways that influence the cells to differentiate.