Noxious floating weeds of Malaysia

After ten years of field surveys on various water bodies ranging from stagnant water ponds, pools and man-made lakes to flowing waters such as rivers, streams and canals, there is a clear evidence of four problematic weeds in Malaysia. These species are Eichhornia crassipes, Salvinia molesta, Lemna perpusilla, and Pistia stratiotes. Among these weeds, E. crassipes and S. molesta are widely distributed througout Malaysia. E. crassipes generally dominates canals and rivers although, recently, this species has spread to man-made lakes. The favourable tropical climate and conducive environmental factors help to trigger the massive growth of these weeds. The high nutrient concentrations, notably phosphate which has a soluble reactive concentration greater than 0.1 mg l^–1, initiate a high productivity. Manual control methods are generally used and several herbicides including 2,4-D and glyphosate are frequently employed to eradicate these weeds.     

Social implications of palm oil production through social life cycle perspectives in Johor,Malaysia

The International Journal of Life Cycle Assessment - Palm oil is considered as the primary source of income for many farmers in Southeast Asia and become a very important agricultural commodity for...     

Genetic variation of Trigonobalanus verticillata,a primitive species of Fagaceae,in Malaysia revealed by chloroplast sequences and AFLP markers

The genetic variation of Trigonobalanus verticillata, the most recently described genus of Fagaceae, was studied using chloroplast DNA sequences and AFLP fingerprinting. This species has a restricted distribution that is known to include seven localities in tropical lower montane forests in Malaysia and Indonesia. A total of 75 individuals were collected from Bario, Kinabalu, and Fraser's Hill in Malaysia. The sequences of rbcL, matK, and three non-coding regions (atpB-rbcL spacer, trnL intron, and trnL-trnF spacer) were determined for 19 individuals from these populations. We found a total of 30 nucleotide substitutions and four length variations, which allowed identification of three haplotypes characterizing each population. No substitutions were detected within populations, while the tandem repeats in the trnL -trnF spacer had a variable repeat number of a 20-bp motif only in Kinabalu. The differentiation of the populations inferred from the cpDNA molecular clock calibrated with paleontological data was estimated to be 8.3 MYA between Bario and Kinabalu, and 16.7 MYA between Fraser's Hill and the other populations. In AFLP analysis, four selective primer pairs yielded a total of 431 loci, of which 340 (78.9%) were polymorphic. The results showed relatively high gene diversity (H(S) = 0.153 and H(T) = 0.198) and nucleotide diversity (pi(S) = 0.0132 and pi(T) = 0.0168) both within and among the populations. Although the cpDNA data suggest that little or no gene flow occurred between the populations via seeds, the fixation index estimated from AFLP data (F(ST) = 0.153 and N(ST) = 0.214) implies that some gene flow occurs between populations, possibly through pollen transfer.     

Problem-Solving Skills Appraisal Mediates Hardiness and Suicidal Ideation among Malaysian Undergraduate Students

Objectives

Recent evidence suggests that suicidal ideation is increased among university students, it is essential to increase our knowledge concerning the etiology of suicidal ideation among university students. This study was conducted to examine the relationships between problem-solving skills appraisal, hardiness, and suicidal ideation among university students. In addition, this study was conducted to examine problem-solving skills appraisal (including the three components of problem-solving confidence, approach-avoidance style, and personal control of emotion) as a potential mediator between hardiness and suicidal ideation.

Methods

The participants consisted of 500 undergraduate students from Malaysian public universities.

Results

Structural Equation Modelling (SEM) estimated that undergraduate students with lower hardiness, poor problem-solving confidence, external personal control of emotion, and avoiding style was associated with higher suicidal ideation. Problem-solving skills appraisal (including the three components of problem-solving confidence, approach-avoidance style, and personal control of emotion) partially mediated the relationship between hardiness and suicidal ideation.

Conclusion

These findings underline the importance of studying mediating processes that explain how hardiness affects suicidal ideation.     

Hyaluronic acid with or without bone marrow derived-mesenchymal stem cells improves osteoarthritic knee changes in rat model: a preliminary report

Despite being a complex degenerative joint disease, studies on osteoarthritis (OA) suggest that its progression can be reduced by the use of hyaluronic acid (HA) or mesenchymal stem cells (MSC). The present study thus aims to examine the effects of MSC, HA and the combination of HA-MSC in treating OA in rat model. The histological observations using O'Driscoll score indicate that it is the use of HA and MSC independently and not their combination that delays the progression of OA. In conclusion, the preliminary study suggest that the use of either HA or MSCs effectively reduces OA progression better than their combined use.     

Prospects of implant with locking plate in fixation of subtrochanteric fracture: experimental demonstration of its potential benefits on synthetic femur model with supportive hierarchical nonlinear hyperelastic finite element analysis

Background

Effective fixation of fracture requires careful selection of a suitable implant to provide stability and durability. Implant with a feature of locking plate (LP) has been used widely for treating distal fractures in femur because of its favourable clinical outcome, but its potential in fixing proximal fractures in the subtrochancteric region has yet to be explored. Therefore, this comparative study was undertaken to demonstrate the merits of the LP implant in treating the subtrochancteric fracture by comparing its performance limits against those obtained with the more traditional implants; angle blade plate (ABP) and dynamic condylar screw plate (DCSP).

Materials and Methods

Nine standard composite femurs were acquired, divided into three groups and fixed with LP (n?=?3), ABP (n?=?3) and DCSP (n?=?3). The fracture was modeled by a 20?mm gap created at the subtrochanteric region to experimentally study the biomechanical response of each implant under both static and dynamic axial loading paradigms. To confirm the experimental findings and to understand the critical interactions at the boundaries, the synthetic femur/implant systems were numerically analyzed by constructing hierarchical finite element models with nonlinear hyperelastic properties. The predictions from the analyses were then compared against the experimental measurements to demonstrate the validity of each numeric model, and to characterize the internal load distribution in the femur and load bearing properties of each implant.

Results

The average measurements indicated that the constructs with ABP, DCPS and LP respectively had overall stiffness values of 70.9, 110.2 and 131.4?N/mm, and exhibited reversible deformations of 12.4, 4.9 and 4.1?mm when the applied dynamic load was 400?N and plastic deformations of 11.3, 2.4 and 1.4?mm when the load was 1000?N. The corresponding peak cyclic loads to failure were 1100, 1167 and 1600?N. The errors between the displacements measured experimentally or predicted by the nonlinear hierarchical hyperelastic model were less than 18?%. In the implanted femur heads, the principal stresses were spatially heterogeneous for ABP and DCSP but more homogenous for LP, meaning LP had lower stress concentrations.

Conclusion

When fixed with the LP implant, the synthetic femur model of the subtrochancteric fracture consistently exceeds in the key biomechanical measures of stability and durability. These capabilities suggest increased resistance to fatigue and failure, which are highly desirable features expected of functional implants and hence make the LP implant potentially a viable alternative to the conventional ABP or DCSP in the treatment of subtrochancteric femur fractures for the betterment of clinical outcome.     

Research report: The study of ethnic alignment: A new technique and an application in Malaysia

In some circumstances, like driving a motor vehicle, group membership is irrelevant. In others, individual interest motivates group alignment. Sometimes choices have to be made between individual responses and group alignment, or between alignment on the basis of class, or ethnicity, or religion. The authors describe a technique used to assess the strength of ethnic loyalty relative to self‐interest and personal obligation among an urban sample in Malaysia. Predictions of how a representative Malay would react in situations of value conflict made possible the measurement of pluralistic ignorance. The technique could be used elsewhere. It could be used to generate predictions about trends in the strengthening, maintenance or weakening of ethnic boundaries.     

Quantifying the ultrastructure changes of air-dried and irradiated human amniotic membrane using atomic force microscopy: a preliminary study

Air-dried and sterilized amnion has been widely used as a dressing to treat burn and partial thickness wounds. Sterilisation at the standard dose of 25 kGy was reported to cause changes in the morphological structure as observed under the scanning electron microscope. This study aimed to quantify the changes in the ultrastructure of the air-dried amnion after gamma-irradiated at several doses by using atomic force microscope. Human placentae were retrieved from mothers who had undergone cesarean elective surgery. Amnion separated from chorion was processed and air-dried for 16 h. It was cut into 10?×?10 mm, individually packed and exposed to gamma irradiation at 5, 15, 25 and 35 kGy. Changes in the ultrastructural images of the amnion were quantified in term of diameter of the epithelial cells, size of the intercellular gap and membrane surface roughness. The longest diameter of the amnion cells reduced significantly after radiation (p?<?0.01) however the effect was not dose dependent. No significant changes in the shortest diameter after radiation, except at 35 kGy which decreased significantly when compared to 5 kGy (p?<?0.01). The size of the irradiated air-dried amnion cells reduced in the same direction without affecting the gross ultrastructure. At 15 kGy the intercellular gap decreased significantly (p?<?0.01) with Ra and Rq, values reflecting surface roughness, were significantly the highest (p?<?0.01). Changes in the ultrastructure quantified by using atomic force microscope could complement results from other microscopic techniques.     

Effects of irradiance and spectral quality on seedling development of two Southeast Asian Hopea species

 Seedling developmental responses to understory shade combine the effects of reductions in irradiance and changes in spectral quality. We studied the seedling development of two Southeast Asian dipterocarp trees in response to differences in irradiance (photosynthetic photon flux density, PPFD) and spectral quality (red to far-red ratio, R:FR). The two species, Hopea helferei and H. odorata, are taxonomically closely related but differ in their ecological requirements; H. helferei is more drought-tolerant and typically grows in more open habitats. Seedlings were grown in six different replicated shadehouse treatments varying in percentage of solar PPFD and R:FR. The two species differed in the influence of light variables on most seedling characters, particularly for final height, internode distance, branch/trunk internodes, stem length/mass, leaf area/stem length, petiole length, and growth/mol of photons received. Most of the characters in both taxa were primarily influenced by PPFD, but spectral quality also influenced some characters – more so for H. odorata. The latter species grew more rapidly, particularly in the low PPFD treatments, and its leaves were capable of higher photosynthesis rates. However, growth in H. helferei was not reduced in direct sunlight. The growth of this taxon may be constrained by adaptations, particularly in leaves, for drought tolerance. Received: 14 April 1996 / Accepted: 8 October 1996