Characterisation of Trypanosoma cruzi populations by dna polymorphism of the cruzipain gene detected by single-stranded dna conformation polymorphism (SSCP) and direct sequencing

Fifty fresh isolates of Trypanosoma cruzi from Triatoma dimidiata vectors and 31 from patients with Chagas disease were analysed for DNA polymorphisms within the 432-bp core region of the cruzipain gene which encodes the active site of cathepsin L-like cystein proteinase. The cruzipain gene showed signs of polymorphism consisting of four different DNA sequences in Central and South American isolates of T. cruzi. The PCR fragments of Guatemalan isolates could be divided into three groups, Groups 1, 2 and 3, based on different patterns of single-stranded DNA conformation polymorphism. All of the strains isolated from Brazil, Chile, and Paraguay, except for the CL strain, showed a Group 4 pattern. Two to four isolates from each group were analysed by cloning and sequencing. A silent mutation occurred between Groups 1 and 2, and five nucleotides and two aa substitutions were detected between Groups 1 and 3. The DNA sequence of Group 4 contained five nucleotides and one aa substitution from Group 1. All of the DNA sequences corresponded well with the single-stranded DNA conformation polymorphism. The Group 1 isolates, the majority in the Guatemalan population (70/81, 86.4%), were isolated from both triatomines and humans, but Group 3 were isolated only from humans. Moreover, the Group 2 isolates were detected only in triatomine vectors (9/50; 18%), but never in humans (0/32, P<0.05) suggesting that this group has an independent life-cycle in sylvatic animals and is maintained by reservoir hosts other than humans.     

Effect of mixing on biogas production during mesophilic anaerobic digestion of screened dairy manure in a pilot plant

The effect of mixing on biogas production of a 1.5‐m³ pilot continuous stirred tank reactor (CSTR) processing screened dairy manure was evaluated. Mixing was carried out by recirculation of reactor content with a mono pump. The experiment was conducted at a controlled temperature of 37±1°C and hydraulic retention times (HRTs) of 20 and 10 days. The effect of continuous and intermittent operation of the recirculation pump on biogas production was studied. At 10 days of HRT, the results showed a minimal influence of recirculation rate on biogas production and that continuous recirculation did not improve reactor performance. At 20 days of HRT, the recirculation rate did not affect reactor performance. Combination of low solid content in feed animal slurry and long HRTs results in minimal mixing requirements for anaerobic digestion.     

A phylogenetic analysis of species in the Bufo crucifer group (Anura: Bufonidae), based on indolealkylamines and proteins from skin secretions

This research tested the utility of two classes of skin secretion compounds to the phylogeny of the Bufo crucifer group. Skin secretions from specimens of nine populations of B. crucifer group were obtained and submitted to qualitative analysis. We observed a clear difference in the composition of the skin secretion molecules obtained from the species of Bufo studied. Fifty-nine molecules, 16 indolealkylamines and 43 proteins, were used as characters, and 39 of these were parsimonious informative. The tree topology of the skin secretion combined data showed areas of congruence and conflict when compared to an mtDNA phylogeny of the B. crucifer group. We used the Templeton test to evaluate the heterogeneity between the skin secretion and mtDNA data. Although not recommended, we performed a combined analysis with the two partitions. The skin secretion characters from the species of Bufo studied have phylogenetic signal. These data are indicative, at least as a preliminary study, of the phylogenetic relationships among the B. crucifer group taxa.     

Effect of organic and conventional farming on soil bacterial diversity of pecan tree (Carya illinoensis K. Kosh) orchard across two phenological stages

We described the bacterial diversity of walnut grove soils under organic and conventional farming. The bacterial communities of rhizospheric and nonrhizospheric soils of pecan tree (Carya illinoensis K. Koch) were compared considering two phenological stages (sprouting and ripening). Sixteen operational taxonomic units (OTUs) were identified significantly more abundant according to the plant development, only one according to the farming condition, and none according to the soil origin. The OTUs specificaly abundant according to plant development included Actinobateria (2) and Betaproteobacteria (1) related OTUs more abundant at the sprouting stage, while at the fruit ripening (FR) stage the more abundant OTUs were related to Actinobacteria (6), Alphaproteobacteria (6), and unclassified Bacteria (1). The Gaiellaceae OTU18 (Actinobacteria) was more abundant under conventional farming. Thus, our study revealed that the plant development stage was the main factor shaping the bacterial community structure, while less influence was noticed for the farming condition. The bacterial communities exhibited specific metabolic capacities, a large range of carbon sources being used at the FR stage. The identified OTUs specifically more abundant represent indicators providing useful information on soil condition, potential tools for the management of soil bacterial communities.     

Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

The importance of location and visual cues during foraging in the German wasp (Vespula germanica F.) (Hymenoptera: Vespidae)

Abstract

The way in which foraging wasps use cues for prey location and choice appears to depend on both the context and on the type of prey. Vespula germanica is an opportunistic, generalist prey forager, and individual wasp foragers often return to hunt at sites of previous hunting success. In this paper, we studied which cues are used by this wasp when relocating a food source. Particularly we analysed the response to a displaced visual cue versus a foraging location at which either honey or cat food had been previously presented. We conclude that location is used over a displaced visual cue for directing wasp hovering, although the landing response is directed differently according to bait type. When wasps are exploiting cat food, location also elicits landing, but if they are exploiting honey, a displaced visual cue elicits landing more frequently than location.     

Host Cell Poly(ADP-Ribose) Glycohydrolase Is Crucial for Trypanosoma cruzi Infection Cycle

Trypanosoma cruzi, etiological agent of Chagas’ disease, has a complex life cycle which involves the invasion of mammalian host cells, differentiation and intracellular replication. Here we report the first insights into the biological role of a poly(ADP-ribose) glycohydrolase in a trypanosomatid (TcPARG). In silico analysis of the TcPARG gene pointed out the conservation of key residues involved in the catalytic process and, by Western blot, we demonstrated that it is expressed in a life stage-dependant manner. Indirect immunofluorescence assays and electron microscopy using an anti-TcPARG antibody showed that this enzyme is localized in the nucleus independently of the presence of DNA damage or cell cycle stage. The addition of poly(ADP-ribose) glycohydrolase inhibitors ADP-HPD (adenosine diphosphate (hydroxymethyl) pyrrolidinediol) or DEA (6,9-diamino-2-ethoxyacridine lactate monohydrate) to the culture media, both at a 1 µM concentration, reduced in vitro epimastigote growth by 35% and 37% respectively, when compared to control cultures. We also showed that ADP-HPD 1 µM can lead to an alteration in the progression of the cell cycle in hydroxyurea synchronized cultures of T. cruzi epimastigotes. Outstandingly, here we demonstrate that the lack of poly(ADP-ribose) glycohydrolase activity in Vero and A549 host cells, achieved by chemical inhibition or iRNA, produces the reduction of the percentage of infected cells as well as the number of amastigotes per cell and trypomastigotes released, leading to a nearly complete abrogation of the infection process. We conclude that both, T. cruzi and the host, poly(ADP-ribose) glycohydrolase activities are important players in the life cycle of Trypanosoma cruzi, emerging as a promising therapeutic target for the treatment of Chagas’ disease.