A mechanobiological model to study upstream cell migration guided by tensotaxis

Biomechanics and Modeling in Mechanobiology - Cell migration is a process of crucial importance for the human body. It is responsible for important processes such as wound healing and tumor...     

Peptide N-alkylamides by solid phase synthesis

Three new resins have been developed that allow for the solid phase synthesis of C-terminal peptide N-alkylamides using Boc amino acids, usual side chain protecting groups and hydrogen fluoride cleavage and deprotection. These resins were prepared by reacting the appropriate alkylamine (NH2CH3, NH2CH2CH3, NH2CH2CF3) to Merrifield's 1% divinylbenzene cross-linked chloromethylated polystyrene resin. The application of these resins to the synthesis of C-terminal GnRH N-alkylamides illustrates the versatility of this approach. GnRH analogs were tested for their ability to release LH from cultured rat anterior pituitary cells. [DGlu6, Pro9-NHCH2CH3]-GnRH was synthesized for the first time using the solid phase approach and found to be three times more potent than [DGlu6]-GnRH. Other analogs including [DTrp6, Pro9-NHCH2CH3]-GnRH, [DAla6, Pro9-NHCH2CF3]-GnRH and related peptides were found to be equipotent and to have the same properties (HPLC retention times, amino acid analysis and specific rotation) as the corresponding peptides synthesized using less amenable strategies; yields were equivalent or better than those reported earlier.     

Characterization of the microtubule movement produced by sea urchin egg kinesin

We have used an in vitro assay to characterize some of the motile properties of sea urchin egg kinesin. Egg kinesin is purified via 5'-adenylyl imidodiphosphate-induced binding to taxol-assembled microtubules, extraction from the microtubules in ATP, and gel filtration chromatography (Scholey, J. M., Porter, M. E., Grissom, P. M., and McIntosh, J. R. (1985) Nature 318, 483-486). This partially purified kinesin is then adsorbed to a glass coverslip, mixed with microtubules and ATP, and viewed by video-enhanced differential interference contrast microscopy. The microtubule translocating activity of the purified egg kinesin is qualitatively similar to the analogous activity observed in crude extracts of sea urchin eggs and resembles the activity of neuronal kinesin with respect to both the maximal rate (greater than 0.5 micron/s) and the direction of movement. Axonemes glide on a kinesin-coated coverslip toward their minus ends, and kinesin-coated beads translocate toward the plus ends of centrosome microtubules. Sea urchin egg kinesin is inhibited by high concentrations of SH reagents ([N-ethylmaleimide] greater than 3-5 mM), vanadate greater than 50 microM, and [nonhydrolyzable nucleotides] greater than or equal to [MgATP]. The nucleotide requirement of sea urchin egg kinesin is fairly broad (ATP greater than GTP greater than ITP), and the rate of microtubule movement increases in a saturable fashion with the [ATP]. We conclude that the motile activity of egg kinesin is indistinguishable from that of neuronal kinesin. We propose that egg kinesin may be associated with microtubule-based motility in vivo.     

Characterization of messenger RNA from epimastigotes and metacyclic trypomastigotes of Trypanosoma cruzi

The cell-free translation products of polyribosomal and post-polyribosomal mRNAs from the non-infective epimastigotes and the infective metacyclic trypomastigotes of the parasitic protozoan Trypanosoma cruzi were compared by two-dimensional polyacrylamide gel electrophoresis. The result show that although many polypeptides are conserved, quantitative and qualitative differences are observed between both differentiation stages. The results also indicate the existence of post-polyribosomal mRNAs in equilibrium with polyribosomal counterparts. The immunoprecipitation of the in vitro synthesized polypeptides with chagasic human serum and the serum raised against an 85-kDa glycoprotein (P2-WGA), potentially involved in the process of T. cruzi penetration into mammalian cells, shows that while the chagasic serum recognizes the same 72-kDa, 68-kDa and 46-kDa polypeptides in both differentiation stages, the anti-P2-WGA serum immunoprecipitates a single 48-kDa polypeptide from in vitro translation products of metacyclic trypomastigotes.     

Chromosome studies in the red howler monkey, Alouatta seniculus stramineus (Platyrrhini, Primates): description of an X1X2Y1Y2/X1X1X2X2 sex-chromosome system and karyological comparisons with other subspecies

In the red howler monkey, Alouatta seniculus stramineus (2n = 47, 48, or 49), variations in diploid chromosome number are due to different numbers of microchromosomes. Males exhibit a Y;autosome translocation involving the short arm of an individual biarmed autosome. Consequently, the sex-chromosome constitution in the male is X1X2Y1Y2, with X1 representing the original X chromosome, X2 the biarmed autosome (No. 7), Y1 the Y;7p translocation product, and Y2 the acrocentric homolog of 7q. In the first meiotic division, a quadrivalent with a chain configuration can be observed in spermatocytes. Females have an X1X1X2X2 sex-chromosome constitution. Chromosome heteromorphisms were observed in pair 13, due to a pericentric inversion, and pair 19, due to the presence of constitutive heterochromatin. Microchromosomes, which varied in number between individuals, were also heterochromatic. NOR-staining was observed at two separate sites on a single chromosome pair (No. 10). A comparison of A.s. stramineus with A.s. macconnelli shows that these two subspecies have identical diploid chromosome numbers (47, 48, or 49), again due to a varying number of microchromosomes, and that they share a similar sex-chromosome constitution. Their karyotypes, however, are not identical, but can be derived from each other by a reciprocal translocation. Further comparisons with other A. seniculus subspecies reported in the literature indicate that this taxon is not karyologically uniform and that substantial chromosome shuffling has occurred between populations that have been considered to be subspecies by taxonomic criteria based on their morphometric attributes.     

A phylogenetic analysis of species in the Bufo crucifer group (Anura: Bufonidae), based on indolealkylamines and proteins from skin secretions

This research tested the utility of two classes of skin secretion compounds to the phylogeny of the Bufo crucifer group. Skin secretions from specimens of nine populations of B. crucifer group were obtained and submitted to qualitative analysis. We observed a clear difference in the composition of the skin secretion molecules obtained from the species of Bufo studied. Fifty-nine molecules, 16 indolealkylamines and 43 proteins, were used as characters, and 39 of these were parsimonious informative. The tree topology of the skin secretion combined data showed areas of congruence and conflict when compared to an mtDNA phylogeny of the B. crucifer group. We used the Templeton test to evaluate the heterogeneity between the skin secretion and mtDNA data. Although not recommended, we performed a combined analysis with the two partitions. The skin secretion characters from the species of Bufo studied have phylogenetic signal. These data are indicative, at least as a preliminary study, of the phylogenetic relationships among the B. crucifer group taxa.     

Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

Enhancement of metabolic rates of yeast flocculent cells through the use of polymeric additives

The influence of several polymeric additives on specific glucose uptake rate of flocs of a S. cerevisiae strain — S. cerevisiae NRRLY 265 was studied. A special continuous membrane microreactor was used to measure glucose uptake on the presence of calcium and of the tested additives — two cationic polymers — bis(polyoxyethylene-bis(amine)) 20,000 and BPA 1,000 and one anionic polymer — Magna Floc LT25.An increase on glucose uptake rate was always observed when comparing with calcium bound flocs. For bis(polyoxyethylene-bis(amine)) 20,000 the increase was only 19% but for BPA 1,000 a value of more than 50% was observed. For Magna Floc LT25 a two fold increase was measured.The determination of floc size and porosity in the presence of the additives indicated that, on the basis of these parameters, it was not possible to explain the observed glucose uptake rates. The floc porosites in additive bound flocs were similar and 10% larger than for calcium bound flocs and glucose uptake rate was larger for the largest flocs — Magna Floc LT25 bound flocs were the largest followed by BPA 1,000, bis(polyoxyethylene-bis(amine)) 20,000 and calcium bound flocs. These values disagree with what should be expected in diffusion controlled processes.The calculation of intercellular floc distance indicated that polymeric additives act on the reduction of diffusional limitations by increasing the available flux area for glucose inside the flocs. By analysing different kinds of packings, it was also observed that the packing arrangement for yeast cells in flocs is close to the cubic packing. The simulation of this arrangement for the obtained floc sizes confirmed that the 10% increase in floc porosity is sufficient to explain the increase in the available flux area.