Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

Differential effects of cAMP and cGMP on in vitro epidermal cell growth.

Primary keratinocyte cultures free of dermal fibroblasts were used to investigate the effect of varying cyclic AMP (cAMP) concentrations on epidermal cell function. Addition of 10^?3, 10^?4 or 10^?5 M dibutyryl cAMP to plated cells (day 1) results by day 5 in a dose dependent increase of [³H]TdR incorporation into DNA as determined by increases in both the labeling index and incorporation of ³H label into an isolated DNA fraction. 8-Bromo cAMP, another cAMP analogue, likewise induced keratinocyte proliferation. The proliferative response was dose and time dependent, and 5- to 6-fold increases in ³H label incorporated into DNA were seen at day 6, 8 and up until day 15 of culture. Moreover, elevation of cellular cAMP by addition of cholera toxin, an irreversible stimulator of adenylate cyclase, also demonstrated a time dependent stimulation of [³H]TdR uptake into DNA and increased the labeling index. Specific histochemical staining for keratinaceous protein (Kreyberg technique) demonstrated that elevated cAMP levels also enhance the production of specialized (differentiated) epidermal cells. Determination of the level of cAMP and cyclic GMP (cGMP) by RIA of partially purified fractions of the cultures revealed that addition of 8-bromo cAMP or cholera toxin to the cultures increased the levels of cAMP but not of cGMP. Addition of 8-bromo cGMP to the keratinocytes on day 1 at concentrations of 10^?6, 10^?7 or 10^?8 M had no effect on culture proliferation on days 4, 6 and 8, although qualitative changes in the electron microscopic pattern of the culture stratification and specialization were observed. The results indicate (1) both large and moderate increases in cellular cAMP levels induce keratinocyte culture proliferation and specialization in the absence of fibroblasts or dermal influences, (2) the quantitative enhancement of keratinocyte growth and specialization occurs without apparent participation of cGMP, (3) cGMP may be a qualitative effector of epidermal cell differentiation.     

Choricotyle anisotremi n. sp. (Monogenea: Diclidophoridae) parasitic on Anisotremus scapularis (Tschudi) from the northern Chilean coast

Choricotyle anisotremi n. sp. is described from the gills and on the inner surface of the operculum of Anisotremus scapularis (Pomadasyidae) from the Chilean coast. Distinct characteristics of the new species are: presence of an oval accessory sclerite on the inner quadrant of the clamp adjacent to the accessory sucker; 12 genital hooks; short and stout peduncles, the last pair of which are closely apposed; a lobed seminal receptacle; and a fan-like posthaptor without a terminal lappet.     

Structure of cDNA clones coding for human type II procollagen. The alpha 1(II) chain is more similar to the alpha 1(I) chain than two other alpha chains of fibrillar collagens.

Overlapping cDNA clones were isolated for human type II procollagen. Nucleotide sequencing of the clones provided over 2.5 kb of new coding sequences for the human pro alpha 1(II) gene and the first complete amino acid sequence of type II procollagen from any species. Comparison with published data for cDNA clones covering the entire lengths of the human type I and type III procollagens made it possible to compare in detail the coding sequences and primary structures of the three most abundant human fibrillar collagens. The results indicated that the marked preference in the third base codons for glycine, proline and alanine previously seen in other fibrillar collagens was maintained in type II procollagen. The domains of the pro alpha 1(II) chain are about the same size as the same domains of the pro alpha chains of type I and type III procollagens. However, the major triple-helical domain is 15 amino acid residues less than the triple-helical domain of type III procollagen. Comparison of hydropathy profiles indicated that the alpha chain domain of type II procollagen is more similar to the alpha chain domain of the pro alpha 1(I) chain than to the pro alpha 2(I) chain or the pro alpha 1(III) chain. The results therefore suggest that selective pressure in the evolution of the pro alpha 1(II) and pro alpha 1(I) genes is more similar than the selective pressure in the evolution of the pro alpha 2(I) and pro alpha 1(III) genes.     

Hydrocortisone regulates arylsulfatase A (cerebroside-3-sulfate-3-sulfohydrolase) by decreasing the quantity of the enzyme in cultures of cells dissociated from embryonic mouse cerebra

Previous work from our laboratory (Biochem. J. 219:689–697 (1984) had shown that hydrocortisone stimulated the net accumulation of the myelin-specific sulfolipid in cultures of cells dissociated from embryonic mouse cerebra. This accumulation caused by hydrocortisone was shown to be due to a decrease of sulfolipid degradation by arylsulfatase A (ASA) and not due to a stimulation of its synthesis by a sulfotransferase. Both ASA activity and the turnover of sulfolipid were decreased by hydrocortisone to 60–62% of untreated cells. In current work the same decrease in enzyme activity was obtained and enzyme linked immunosorbent assays demonstrate that hydrocortisone decreased the number of ASA protein molecules to 61% of untreated cells [(-)hydrocorcortisone 0.31±0.06 ng ASA/g protein; (+)hydrocortisone: 0.18±0.04 ng ASA/g protein]. This decrease in the number of ASA molecules correlates well with the decrease in both the enzyme activity and the sulfolipid turnover, which suggests that the major mode of inhibition of ASA activity by hydrocortisone involves a decrease in the concentration of ASA in the cells rather than some other mechanism of inhibition.The material in this paper has been included in a dissertation submitted by A.J.M. in partial fulfillment of the requirements for the degree of Doctor of Philosophy. Temple University.     

The cytotaxonomy ofEmilia spp. (Asteraceae: Senecioneae) occurring in Brazil

Analysis of several populations in a large part of the distribution area of the genusEmilia in Brazil has revealed only two species: the diploidE. sonchifolia and the tetraploidE. fosbergii. The more widely reportedE. coccinea was not found. They show a karyotype constancy in morphology and chromosome number (2n = 10 and 2n = 20, respectively), C-banding pattern and number of secondary constrictions. Some indications were found thatE. fosbergii may be an allopolyploid and that its ancestors had different genome sizes.     

Lectin binding sites in the vitelline envelope of Bufo arenarum oocytes: Role in fertilization

Incubation of dejellied spawned oocytes from Bufo arenarum with different lectins results in a decrease of oocyte fertility. Concanavalin A was the most effective lectin; phytohem-agglutinin P and wheat germ lectin were less effective. Agglutinin from soybean was scarcely active. These lectin effects could be ascribed to a hindering of specific sites for some proteases, since the same treatment renders the oocyte vitelline envelope insensitive to spermatolysin (an essential requisite for fertilization) and to trypsin. Also in this case concanavalin A was the most effective lectin. Univalent concanavalin A was also effective in blocking the fertility of dejellied oocytes. These results indicate that the residues of α-D-glucose and α-D-mannose present in the vitelline envelope are involved in gamete interactions in Bufo arenarum. This idea is also supported by the finding that dejellied oocytes (fertilizables) have a number of binding sites for concanavalin A that is three or four orders of magnitude higher than coelomic or fertilized oocytes (both not penetrable by spermatozoa).     

Adsorption of 5′-adenosine monophosphate onto precipitated calcium phosphate: Effects of inorganic polyphosphates and carbamyl phosphate

In this paper it is shown that the adsorption of 5-adenosine monophosphate (5-AMP) onto precipitated calcium phosphate exhibits a sigmoidal profile as revealed by isotherms at 45 °C. This result indicates a cooperative behavior in the adsorption of 5-AMP. The relationship between adsorption capacity and surface area of the sedimented matrix may be interpreted as an indication that there is a monolayer of the adsorbed nucleotide on the solid surface. The pH dependence of adsorption suggests that the negatively charged phosphoryl group of 5-AMP interacts with a positively charged site (possibly Ca²⁺) on the matrix surface. The adsorption of the nucleotide is markedly decreased at pH values above 8.0. The Dixon-like plot of the effect of pH suggests an inhibitory role of hydroxyl ions in the adsorption of 5-AMP. At pH 7.5, other anions such as pyrophosphate, tripolyphosphate and carbamyl phosphate also inhibit the adsorption of the nucleotide, probably by interacting with its adsorption site. We suggest that these phosphorylated molecules could have played a role in chemical evolution by modulating the amount of nucleotides adsorbed onto mineral surfaces. The significance of these phenomena in chemical evolution is discussed.     

Identification and characterization of three genes and two pseudogenes on chromosome 13

A study was conducted on the feasibility of isolating genes and pseudogenes that map to chromosome 13 by a hybridization-based approach using a 13-specific library and pools of repeat-free cDNA clones. Five pairs of cDNA and chromosome 13 genomic clones were identified and characterized. Partial or full-length sequence was derived from all cDNAs, and database searches were performed for putative gene identification. Partial sequence was also obtained from the chromosome 13 genomic clones for comparison with those of the hybridizing cDNAs. As a result of these analyses we identified three genes, a putative homologue of a porcine mRNA encoding an unidentified hepatic protein, a putative homologue of a yeast integral membrane protein, and a gene for a translationally controlled tumor protein, and two processed pseudogenes, ribosomal proteins L23a and S3a. The latter was formerly identified as the v-fos transformation effector gene, Fte-1, and recently cited as a possible candidate for the BRCA2 gene on chromosome 13. All genes and pseudogenes were localized to cytogenetic bands by in situ hybridization of metaphase chromosomes with probes derived from the chromosome 13 genomic clones.     

Analytical study of the effects of some soil and plant parameters on root growth due to absorption of one mobile ion: A free-boundary model

The object of our study is: a model for root growth through a free-boundary problem and the effects resulting from differences in nutrient availability and transport of only one mobile nutrient between the root surface and the rhizosphere produced by an absorption Michaelis-Menten for low and high concentrations. The model equations are solved by two methods: the quasi-stationary method and the balance integral method. The numerical solutions are used to compute radial root growth. Curves of nutrient concentration at the root-soil interface, curve as a function of root radius as well as curves representing root radius as a function of time are plotted. The parameters which are varied are the root absorption power, flux velocity at the root surface, efflux, rhizosphere radius, diffusion coefficient, buffer power, and maximum influx. The two methods show the theoretical results for radial root growth in the range of low and high concentrations. The balance integral method provides more detailed information.