Rosselia socialis: a dwelling structure of a probable terebellid polychaete

The trace fossil Rosselia socialis Dahmer 1937 is a funnel-shaped structure characterized by a concentrically laminated wall having a narrow cylindrical shaft at the central portion. In association with well-preserved funnel-shaped R. socialis , many spindle-shaped R. socialis -like specimens are abundant in the Middle Pleistocene Kongochi Formation in central Japan. While the former always occur just below an erosional bedding plane or outcrop surface parallel to the bedding, the latter are found in sediment showing no breaks in sedimentation. This suggests that the funnel-shaped 'R. socialis' is actually the truncated lower part of the spindle-shaped structure. In one specimen, deformation of laminae appears to have formed synchronously with construction of the wall. Morphology of the structure strongly suggests that the wall of R. socialis was formed through outward expansion caused by accretion of muddy material at the inner surface of the wall by the trace-maker inhabiting the central burrow. A specimen that was covered by a volcanic ash has the wall made up of the ash. This indicates that the maker of the burrow utilized surface sediment to construct the wall; that is, the trace-maker was possibly a detritus feeder. The terebellid polychaetes are reasonable candidates for the trace-makers. □ R osselia socialis , Japan, Middle Pleistocene, trace fossil, trace-making process, trace-maker.     

THE SURFACE EVENTS AT FERTILIZATION OF THE SEA URCHIN EGG I. EVENTS ON THE SURFACE OF THE VITELLINE COAT1

Sperm-egg interaction during normal fertilization in the sea urchins, Strongylocentrotus intermedius and Hemicentrotus pulcherrimus, was studied by scanning and transmission electron microscopy. Several seconds after insemination, acrosome-reacted spermatozoa were found attached to the surface of the vitelline coat on each egg. Soon, several bulges of the vitelline coat appeared surrounding the fertilizing spermatozoon. These bulges then spread over the surface increasing in number, while they became fewer and disappeared around the sperm head. Thin sections of the bulging areas revealed discharging cortical granules. As the bulging vitelline coat was elevated, the sperm head was incorporated into the perivitelline space, passing through a small hole in the coat that resulted from penetration of the sperm acrosomal process immediately before fusion of the gametes. When the spermatozoon disappeared beneath the fertilization membrane, a hole was left in the membrane and the cortical reaction had finished on the other hemispheric surface. Mechanical removal of the membrane at that time exposed a spermatozoon protruding perpendicularly from the egg plasma membrane surface. The anterior tip of the sperm head was smoothly connected with the egg surface, and neither microvillous projections nor cytoplasmic covering of the egg cytoplasm could be found around the spermatozoon.     

Taxonomic identity of a galling adelgid (Hemiptera: Adelgidae) from three spruce species in Central Japan

Gall‐forming insects are commonly highly host‐specific, and galling species once thought to be oligo‐ or polyphagous are often found to represent a complex of host‐specific races or cryptic species. A recent DNA barcoding study documented that an unidentified species of the genus Adelges is a gall‐former associated with four spruce species (Picea bicolor, P. koyamai, P. maximowiczii, P. polita) as the primary hosts, with little genetic differentiation among insects on different host species. In this study, we investigated the morphology of this galling adelgid to determine its taxonomic identity. Morphological inspection of insects collected from three of the spruce species confirmed that this adelgid is a single galling species, and is identified as Adelges (Sacchiphantes) kitamiensis, which was previously known only from the secondary host. We described the gallicola adults of this species, as well as the first‐instar exules which are the offspring of gallicolae. Finally, we verified the taxonomic identity of this species and discuss its life cycle and host distribution.     

Variations in the Lengths of Fusiform Cambial Cells and Vessel Elements in Kalopanax pictus

Samples of a mature specimen of Kalopanax pictus, a ring-poroushardwood, were studied to compare the respective lengths offusiform cambial cells and vessel elements in the stem. Thelengths of dormant and reactivated fusiform cambial cells weremeasured with a confocal laser scanning microscope in tissuethat had been macerated by digestion with pectinase and in thicktangential sections. The lengths of early wood and late woodvessel elements were measured in tissues that had been maceratedby Franklin's method. The vessel elements and fusiform cambialcells varied considerably in length within individual samples.The mean length of early wood vessel elements corresponded tothat of fusiform cells in the dormant cambium but not in thereactivated cambium. Significant differences were observed betweenthe mean lengths of dormant and reactivated fusiform cambialcells, between those of reactivated fusiform cambial cells andearly wood vessel elements, between those of reactivated fusiformcambial cells and late wood vessel elements, and between thoseof early wood and late wood vessel elements. The frequency distributionsof lengths of cambial cells were bimodal and differed from thoseof vessel elements, which more closely resembled a normal distribution.The proportion of shorter lengths was higher in the reactivatedcambium than in the dormant cambium, the early wood and thelate wood vessel elements. Our results do not suppot the hypothesisthat the lengths of early wood vessel elements in ring-poroushardwoods change during differentiation. The similar rangesof recorded lengths suggest that short and long vessel elementsmight be derived directly from short and long cambial cells,respectively. Copyright 1999 Annals of Botany Company Kalopanax pictus, cambium, vessel element, confocal laser scanning microscopy, maceration, cell length.     

Diversification in flowering time due to tandem FT-like gene duplication, generating novel Mendelian factors in wild and cultivated rice

The complex structure of a single Mendelian factor widespread in the Asian cultivated rice ( Oryza sativa ) and its wild progenitor ( Oryza rufipogon ) that caused diverse phenotypes in the timing of flowering under natural field conditions was investigated in near isogenic lines. These near isogenic lines showed differences in flowering time despite all eight accessions collected from tropical regions possessing a recessive gene allelic to the se-pat gene. Fine mapping in two of these near-isogenic lines revealed that cultivated (Patpaku) and wild (W593) accessions had three and two linked quantitative trait loci (QTL) in the candidate regions, respectively, showing that Patpaku and W593 possessed linked QTLs with different effects in addition to the commonly-observed recessive gene ( se-pat ). Molecular dissection suggested that the tandemly duplicated FT-like genes ( Hd3a and RFT1 ) could be the candidate genes for these QTLs. Interestingly, the linked QTLs differed in their epistases, degree of dominance, and genotype × environment interactions. The nucleotide sequences showed that RFT1 has diverged more rapidly than Hd3a during rice evolution, suggesting phenotypic diversification of the two genes. Phylogenetic analysis implied that the se-pat ⁺ alleles might have emerged in different lineages within O. sativa . The present results strongly suggest that nucleotide divergence and shuffling of the linked QTLs by recombination might have created novel Mendelian factors that probably contribute to responding to local environments.     

Change in the indole-3-acetic acid oxidase level in leaves of Begonia evansiana cuttings at the time of aerial tuber formation under short-day conditions

IAA oxidase in Begonia evansiana leaves was partially purifiedby DEAE cellulose chromatography. The enzyme was identifiedas peroxidase from its elution pattern, its Michaelis constantand the effects of various inhibitors and high temperature. In B. evansiana, which requires SD treatment to form aerialtubers, the amount of IAA oxidase in leaves increased to a maximumafter 2 days of SD treatment. When SDs with interrupted nightwere given, a maximum was reached after 6 SDs. Thus, the changein IAA oxidase content had an inverse correlation to that forIAA content observed previously. (Received May 18, 1970; )     

Development of Melanocyte Progenitors in Murine Steel Mutant Neural Crest Explants Cultured With Stem Cell Factor,Endothelin-3, or TPA

Stem cell factor (SCF) has been suggested to be indispensable for the development of neural crest cells into melanocytes because Steel mutant mice (i.e., Sl/Sf¹) have no pig-mented hairs. On the other hand, it has been demonstrated that the addition of endothelin 3 (ET-3) or TPA to neural crest cell cultures can induce melanocyte differentiation without addition of extrinsic SCF. In this study, we excluded the influence of intrinsic SCF by using SI/SI mouse embryos to study more precisely the effects of natural cytokines, such as extrinsic soluble SCF or ET-3, or chemical reagents, such as TPA or cholera toxin. We found that SCF is supplied within the wild-type neural crest explants and that ET-3 cannot induce melanocyte differentiation or proliferation without SCF. These results indicate that SCF plays a critical role in survival or G1/S entry of melanocyte progenitors and that SCF initially stimulates their proliferation and then ET-3 accelerates their proliferation and differentiation. TPA has the ability to elicit neural crest cell differentiation into melanocytes without exogenously added SCF but it is not as effective as SCF because many more melanocytes developed in the wild-type neural crest explants cultured with TPA.     

MAGNESIUM REQUIREMENT IN FERTILIZATION PROCESS OF SEA URCHINS

The Mg²⁺ requirement in fertilization was investigated in sea urchins. It was found that when sea urchin eggs were inseminated in sea water free of Mg²⁺, little fertilization took place. Even when spermatozoa pre-treated with dissolved egg-jelly to induce the acrosome reaction, which needs Ca²⁺, were used, the fertilization rate remained quite low in the absence of Mg²⁺. In Strongylo-centrotus intermedius , the lowest concentration of Mg²⁺ required for 50% fertilization was 0.05 mM in the presence of 10 mM Ca²⁺, whereas that of calcium was 3 mM in the presence of 49 mM Mg²⁺. These critical concentrations increased when the concentration of the other ion decreased. Removal of Mg²⁺ or Ca²⁺ or both from the suspending medium had little adverse effect on sperm motility. The elevation of the fertilization membrane was also induced by butyric acid independent of the presence or absence of Mg²⁺ and/or Ca²⁺. These results indicate that Mg²⁺ are required at least in some process(es) between acrosome reaction and fertilization membrane elevation, such as sperm penetration or membrane fusion.