A covalently bound photoisomerizable agonist. Comparison with reversibly bound agonists at electrophorus electroplaques

After disulphide bonds are reduced with dithiothreitol, trans-3- (α-bromomethyl)-3’-[α- (trimethylammonium)methyl]azobenzene (trans-QBr) alkylates a sulfhydryl group on receptors. The membrane conductance induced by this “tethered agonist” shares many properties with that induced by reversible agonists. Equilibrium conductance increases as the membrane potential is made more negative; the voltage sensitivity resembles that seen with 50 [mu]M carbachol. Voltage- jump relaxations follow an exponential time-course; the rate constants are about twice as large as those seen with 50 μM carbachol and have the same voltage and temperature sensitivity. With reversible agonists, the rate of channel opening increases with the frequency of agonist-receptor collisions: with tethered trans-Qbr, this rate depends only on intramolecular events. In comparison to the conductance induced by reversible agonists, the QBr-induced conductance is at least 10-fold less sensitive to competitive blockade by tubocurarine and roughly as sensitive to “open-channel blockade” bu QX-222. Light-flash experiments with tethered QBr resemble those with the reversible photoisomerizable agonist, 3,3’,bis-[α-(trimethylammonium)methyl]azobenzene (Bis-Q): the conductance is increased by cis {arrow} trans photoisomerizations and decreased by trans {arrow} cis photoisomerizations. As with Bis-Q, ligh-flash relaxations have the same rate constant as voltage-jump relaxations. Receptors with tethered trans isomer. By comparing the agonist-induced conductance with the cis/tans ratio, we conclude that each channel’s activation is determined by the configuration of a single tethered QBr molecule. The QBr-induced conductance shows slow decreases (time constant, several hundred milliseconds), which can be partially reversed by flashes. The similarities suggest that the same rate-limiting step governs the opening and closing of channels for both reversible and tethered agonists. Therefore, this step is probably not the initial encounter between agonist and receptor molecules.     

Palatability and feeding preferences of Uresiphita maorialis (Lepidoptera: Crambidae) for three Sophora species

In a three-hour bioassay, we tested the palatability and feeding preferences of Uresiphita maorialis (kōwhai moth) for Sophora tetraptera, Sophora microphylla and Sophora prostrata. Palatability tests showed no differences among the Sophora species. Feeding preferences, on the other hand, showed that S. tetraptera and S. microphylla leaves are preferred over S. prostrata leaves. Our results support our field observations in Wellington city parks and gardens showing that S. tetraptera and S. microphylla plants frequently have higher densities of larvae than S. prostrata.     

Biodeterioration of Mayan buildings at uxmal and tulum,Mexico

Uxmal and Tulum are two important Mayan sites in the Yucatan peninsula. The buildings are mainly composed of limestone and grey/black discoloration is seen on exposed walls and copious greenish biofilms on inner walls. The principal microorganisms detected on interior walls at both Uxmal and Tulum were cyanobacteria; heterotrophic bacteria and filamentous fungi were also present. A dark‐pigmented mitosporic fungus and Bacillus cereus, both isolated from Uxmal, were shown to be acidogenic in laboratory cultures. Cyanobacteria belonging to rock‐degrading genera Synechocystis and Gloeocapsa were identified at both sites. Surface analysis previously showed that calcium ions were present in the biofilms on buildings at Uxmal and Tulum, suggesting the deposition of biosolubilized stone. Apart from their potential to degrade the substrate, the coccoid cyanobacteria supply organic nutrients for bacteria and fungi, which can produce organic acids, further increasing stone degradation.     

The role of fish-poultry integration on fish growth performance,yields and economic benefits among smallholder farmers in sub-Saharan Africa,Tanzania

Aquaculture practices from sub-Saharan Africa are characterised by low production, owing to improper technology. Production can be increased through integrating fish farming with other existing on-farm activities, particularly livestock husbandry. We assessed the role of fish-poultry integration on all male Nile tilapia, Oreochromis niloticus growth performance, yields and economic benefits among smallholder farmers in sub-Saharan Africa, Tanzania. The study also compared phytoplankton species composition, abundance and biomass between the fish-poultry integration and non-integrated system. After 180 days of the experiment, all male O. niloticus cultured under fish-poultry integration exhibited significantly higher growth rates than those in the non-integrated system (p < 0.05). Gross fish yield (GFY), net fish yield (NFY) and net annual yields (NAY) obtained from fish-poultry integration were significantly higher than those from non-integrated system (p < 0.05). Partial enterprise budget analysis revealed that fish-poultry integration was more profitable than the non-integrated system. Moreover, fish-poultry integrated system produced significantly higher phytoplankton abundance and biomass than those from the non-integrated system. Results demonstrate that rural smallholder farmers can achieve higher growth rate, farm net yields and income by integrating all male O. niloticus with other on-farm activities than practising a stand-alone fish culture system.     

A confirmatory analysis of malachite green residues in rainbow trout with liquid chromatography-electrospray tandem mass spectrometry

A quantitative liquid chromatography-tandem mass spectrometric (LC-MS/MS) method has been developed for the determination of malachite green (MG) and its metabolite leucomalachite green (LMG) in fish. Residues were extracted with an acetonitrile-acetate buffer and purified using the automated solid-phase extraction (ASPEC). Residues were analyzed with a reversed-phase LC-MS/MS using a positive-ion electrospray ionisation (ESI). Isotope-labelled leucomalachite green (LMG-D5) was used as an internal standard for the quantification of LMG residues. The related dye, brilliant green (BG) was used as an instrumental standard. Identification and quantification of analytes were based on the ion transitions monitored by multiple reaction monitoring (MRM). The decision limit (CCalpha) for MG and LMG was 0.13 and 0.16 microgkg(-1). The respective detection capabilities (CCbeta) were 0.22 and 0.27 microgkg(-1). The absolute recovery (repeatability SD(r)) was in the range of 58-65% (7.8-11.2%) for MG and 59-68% (9.7-16.9%) for LMG. LMG was quantified also based on the internal standard, giving a recovery (repeatability SD(r)) of 103-110% (4.8-9.3%). The method was further evaluated by analyzing a total of 34 fish residue monitoring samples, of which eight samples were found to be non-compliant containing low residues of LMG.     

Endosomal escape of delivered mRNA from endosomal recycling tubules visualized at the nanoscale

Delivery of exogenous mRNA using lipid nanoparticles (LNPs) is a promising strategy for therapeutics. However, a bottleneck remains in the poor understanding of the parameters that correlate with endosomal escape versus cytotoxicity. To address this problem, we compared the endosomal distribution of six LNP-mRNA formulations of diverse chemical composition and efficacy, similar to those used in mRNA-based vaccines, in primary human adipocytes, fibroblasts, and HeLa cells. Surprisingly, we found that total uptake is not a sufficient predictor of delivery, and different LNPs vary considerably in endosomal distributions. Prolonged uptake impaired endosomal acidification, a sign of cytotoxicity, and caused mRNA to accumulate in compartments defective in cargo transport and unproductive for delivery. In contrast, early endocytic/recycling compartments have the highest probability for mRNA escape. By using super-resolution microscopy, we could resolve a single LNP-mRNA within subendosomal compartments and capture events of mRNA escape from endosomal recycling tubules. Our results change the view of the mechanisms of endosomal escape and define quantitative parameters to guide the development of mRNA formulations toward higher efficacy and lower cytotoxicity.     

Functional priorities in LCA and design for environment

Aim, Scope and Background  The interest in environmental questions has increased enormously during the last decade. Environmental protection has become an issue of strategic importance within the manufacturing industry and many companies are now working in the field of Design for Environment (DFE). The main purpose of DFE is to create products and services for achieving a sustainable society. Designers are widely believed to have a key role in adapting products to a sustainable society and one of the major instruments in the context of Design for Environment is Life Cycle Assessment (LCA). However, product development creates particular challenges for incorporating environmental issues that combine functional and environmental assessment. A natural and important part of product design is to define and analyse the functions of the product. Consequently, the functional unit in LCA is a core issue in DFE. Most recent research in DFE has focused on how to reduce the environmental impact of products throughout their life-cycle by addressing environmental aspects, while little attention has been given to the functionality of the product. Additionally, early product development phases, so called re-think phases, are considered to have the influence on major changes in products in general. These phases have thus the highest potential for changing products and product systems towards a sustainable development. Main Features  This paper discusses an extended functional representation in design for environment methods to evaluate sustainable design solutions, especially in early (re-think) phases of product design. Based on engineering-design science and several case studies, a concept has been developed describing how functional preferences can be visualised in design for environment and product development. In addition, the functional unit in LCA is discussed. The concept is called Functional Profile (FP) and is additionally exemplified in a case study on radio equipment. Discussion  The new functional characterisation concept helps identify functional priorities in design for environment. The Functional Profile is a structured, systematic and creative concept for identifying the necessary functions of a new product. The FP is envisioned to complement existing design for environment methods, not to replace them. Instead of being a product-development tool or method, the concept is an approach that increases understanding of inter-reactions between functional characteristics of products and their environmental characteristics, which furthermore facilitates trade-off decisions. One of the objectives behind the concept is to highlight the importance of balancing functional requirements and environmental impacts, presenting both the advantages and disadvantages of the product. Outlook  A second paper will be produced to complement the functional-environmental characterisation concept in early product development phase, presenting the environmental characterisation part and illustrating correlations between the functional and environmental sides.     

Extracellular transglutaminase 2 has a role in cell adhesion, whereas intracellular transglutaminase 2 is involved in regulation of endothelial cell proliferation and apoptosis

Objective: Transglutaminase 2 (TG2) is a multifunctional protein with an important role in vascular biology, where it is involved in cell–matrix interaction, cell attachment and cell population expansion. In efforts to elucidate the role of TG2 in endothelial cell biology, in this study, we measured several endothelial cell characteristics in cells where TG2 was specifically knocked down by RNAi. Materials and methods: The effect of small interfering RNA (siRNA)‐TG2 on human umbilical vein endothelial cells was studied. Adhesion and cell viability were assessed by chemical reduction of MTT, and cell proliferation was analysed by flow cytometry. Apoptosis was evaluated by annexin V/PI dual staining and protein expression level was assayed by western blotting. Results: We found that siRNA‐TG2 reduced endothelial cell number, lead to cell adhesion deficiency, cell cycle arrest in G₁ phase and induction of apoptosis. Our results show that exogenously added TG2 could reverse loss of adhesion but did not overcome the defect in cell proliferation, nor could it inhibit siRNA‐TG2‐induced apoptosis. Conclusion: We conclude that TG2 loss in endothelial cells causes reduction in cell number as a result of cell cycle arrest, flaws in adhesion and induction of apoptosis. Our results imply that reduction in cell number and increased apoptosis in response to TG2 silencing is independent of the cell adhesion process. Altogether, our findings underline the significance of TG2 in endothelial cell cycle progression and cell survival, in vitro.