Immunoenzyme analysis of the fertility alpha 2-microglobulin in the blood serum of men and women

It has been found that fertility alpha 2-microglobulin content in male and female serum does not exceed 20 ng/ml and 40 ng/ml, respectively. A high level of fertility alpha 2-microglobulin was found in the serum in early pregnancy, with its concentration decreased by parturition.     

Mobilization of the transposable element mdg4 by hybrid dysgenesis generates a family of unstable cut mutations in Drosophila melanogaster

Summary A family of unstable mutations at the cut locus in Drosophila melanogaster was obtained under the conditions of hybrid dysgenesis (Gerasimova 1981, 1982). The in situ hybridization experiments have shown that, in the original unstable ct ^MR2 mutation, the 7B region of the X chromosome (where cut is located) contains a mobile dispersed genetic element, mdg4. All other unstable ct mutations derived from ct ^MR2 including visible and lethal alleles and unstable ct ⁺ reversions, also contain mdg4 in the 7B region. The X chromosomes of the parent strain (wild type) do not contain mdg4 at all. All stable revertants derived from ct ^MR2, from other unstable ct mutations, or from ct lethals lost mdg4 from the 7B region. The ct ^MR2 X chromosome does not contain P-elements, although a few copies are present in the autosomes. The instability of the ct ^MR2./ct ^MR2 strain remained at a high level for 50 generations (1.5 years) and then rapidly decreased. A new cross with an MRh12/Cy strain (originally used for dysgenesis induction and containing a number of P-elements) increased the instability to a level exceeding the original one. The data strongly suggest that unstable ct mutations in our system are induced by transpositions of mdg4, possibly activated by P-elements.     

Moraxella catarrhalis in chronic and relapsing respiratory tract infections in children]

Examination of 700 children with chronic and relapsing respiratory tract infections showed that during the period from 1996 to 2003 Moraxella catarrhalis strains were isolated from the sputum of 5.5-9.7% of the patients. The frequency of the emergence was the third after Haemophilus influenzae and Streptococcus pneumoniae. In healthy children M. catarrhalis was isolated in 2.7% of the cases. The most frequent detection of M. catarrhalis was stated in children under 1 year (4.5%). The antibiotic susceptibility tests revealed that the majority of the M. catarrhalis isolates had beta-lactamase activity, were resistant to benzylpenicillin, ampicillin and lincomycin and highly susceptible to amoxycillin/clavulanate, macrolides, certain cephalosporins and levofloxacin. The isolates were most frequent in the patients of the rather severe contingent (congenital lung disease, alveolitis, chronic pneumonia, bronchial asthma). In such patients the bronchoobstructive syndrome was more frequent (46.6%). High frequency of the affection of the upper respiratory tracts in the examined children was stated (62.1%).     

Application of cellulose-based self-assembled tri-enzyme system in a pseudo-reagent-less biosensor for biogenic catecholamine detection

Amorphous cellulose was used as a specific carrier for the deposition of self-assembled multienzyme complexes capable of catalyzing coupled reactions. Naturally glycosylated fungal cellobiohydrolases (CBHs) of glycosyl hydrolase families 6 and 7 were specifically deposited onto the cellulose surface through their family I cellulose-binding modules (CBM). Naturally glycosylated fungal laccase was then deposited onto the preformed glycoprotein layer pretreated by ConA, through the interaction of mannosyl moieties of fungal glycoproteins with the multivalent lectin. The formation of a cellulase-ConA-laccase composite was proven by direct and indirect determination of activity of immobilized laccase. In the absence of cellulases and ConA, no laccase deposition onto the cellulose surface was observed. Finally, basidiomycetous cellobiose dehydrogenase (CDH) was deposited onto the cellulose surface through the specific interaction of its FAD domain with cellulose. The obtained paste was applied onto the surface of a Clark-type oxygen electrode and covered with a dialysis membrane. In the presence of traces of catechol or dopamine as mediators, the obtained immobilized multienzyme composite was capable of the coupled oxidation of cellulose by dissolved oxygen, thus providing the basis for a sensitive assay of the mediator. Swollen amorphous cellulose plays three different roles in the obtained biosensor as: (i) a gelforming matrix that captures the analyte and its oxidized intermediate, (ii) a specific carrier for protein self-assembly, and (iii) a source of excess substrate for a pseudo-reagent-less assay with signal amplification. The detection limit of such a tri-enzyme biosensor is 50-100 nM dopamine.     

Differential expression of duplicated LDH-A genes during temperature acclimation of weatherfish Misgurnus fossilis. Functional consequences for the enzyme

Temperature acclimation in poikilotherms entails metabolic rearrangements provided by variations in enzyme properties. However, in most cases the underlying molecular mechanisms that result in structural changes in the enzymes are obscure. This study reports that acclimation to low (5 degrees C) and high (18 degrees C) temperatures leads to differential expression of alternative forms of the LDH-A gene in white skeletal muscle of weatherfish, Misgurnus fossilis. Two isoforms of LDH-A mRNA were isolated and characterized: a short isoform (= 1332 bp) and a long isoform ( = 1550 bp), which both have 5'-UTRs and ORFs of the same length (333 amino acid residues), but differ in the length of the 3'-UTR. In addition, these two mRNAs have 44 nucleotide point mismatches of an irregular pattern along the complete sequence, resulting in three amino acid mismatches (Gly214Val; Val304Ile and Asp312Glu) between protein products from the short and long mRNA forms, correspondingly LDH-A(alpha) and LDH-A(beta) subunits. It is expected that the beta-subunit is more aliphatic due to the properties of the mismatched amino acids and therefore sterically more restricted. According to molecular modelling of M. fossilis LDH-A, the Val304Ile mismatch is located in the subunit contact area of the tetramer, whereas the remaining two mismatches surround the contact area; this is expected to manifest in the kinetic and thermodynamic properties of the assembled tetramer. In warm-acclimated fish the relative expression between alpha and beta isoforms of the LDH-A mRNA is around 5 : 1, whereas in cold-acclimated fish expression of is reduced almost to zero. This indicates that at low temperature the pool of total tetrameric LDH-A is more homogeneous in terms of alpha/beta-subunit composition. The temperature acclimation pattern of proportional pooling of subunits with different kinetic and thermodynamic properties of the tetrameric enzyme may result in fine-tuning of the properties of skeletal LDH-A, which is in line with previously observed kinetic and thermodynamic differences between 'cold' and 'warm' LDH-A purified from weatherfish. Also, an irregular pattern of nucleotide mismatches indicates that these mRNAs are the products of two independently evolving genes, i.e. paralogues. Karyotype analysis has confirmed that the experimental population of M. fossilis is tetraploid (2n = 100), therefore gene duplication, possibly through tetraploidy, may contribute to the adaptability towards temperature variation.     

DNA binding by yeast Mlh1 and Pms1: implications for DNA mismatch repair

The yeast Mlh1–Pms1 heterodimer required for mismatch repair (MMR) binds to DNA. Here we map DNA binding to N-terminal fragments of Mlh1 and Pms1. We demonstrate that Mlh1 and Pms1 N-terminal domains (NTDs) independently bind to double-stranded and single-stranded DNA, in the absence of dimerization and with different affinities. Full-length Mlh1p alone, which can homodimerize, also binds to DNA. Substituting conserved positively charged amino acids in Mlh1 produces mutator phenotypes in a haploid yeast strain characteristic of reduced MMR. These substitutions strongly reduce DNA binding by the Mlh1 NTD and, to a lesser extent, they also reduce DNA binding by full-length Mlh1 and the Mlh1–Pms1 heterodimer. Replacement of a homologous Pms1 residue has a much smaller effect on mutation rate and does not reduce DNA binding. The results demonstrate that NTDs of yeast Mlh1 and Pms1 contain independent DNA binding sites and they suggest that the C-terminal region of Mlh1p may also contribute to DNA binding. The differential mutator effects and binding properties observed here further suggest that Mlh1 and Pms1 differ in their interactions with DNA. Finally, the results are consistent with the hypothesis that DNA binding by Mlh1 is important for MMR.     

Probing the volume changes during voltage gating of Porin 31BM channel with nonelectrolyte polymers

To probe the volume changes of the voltage-dependent anion-selective channel (VDAC), the nonelectrolyte exclusion technique was taken because it is one of the few existing methods that may define quite accurately the rough geometry of lumen of ion channels (in membranes) for which there is no structural data.Here, we corroborate the data from our previous study [FEBS Lett. 416 (1997) 187] that the gross structural features of VDAC in its highest conductance state are asymmetric with respect to the plane of the membrane, and state that this asymmetry is not dependent on sign of voltage applied. Hence, the plasticity of VDAC does not play a role in the determination of lumen geometry at this state and the asymmetry is an internal property of the channel.We also show that the apparent diameter of the cis segment of the pore decreases slightly from 2 to 1.8 nm when the channel's conductance decreases from its high to low state. However, the trans funnel segment undergoes a more marked change in polymer accessible volume. Specifically, its larger diameter decreases from approximately 4 to 2.4 nm. Supposing the channel's total length is 4.6 nm, the apparent change in channel volume during this transition is estimated to be about 10 nm(3), i.e. about 40% of the channel's volume in the high conductance state.