Influence of maize root mucilage on soil aggregate stability

This study was undertaken to determine the effects of root exudates on soil aggregate stability. Root mucilage was collected from two-month old maize plants (Zea mays L.) Mucilage and glucose solutions were added at a rate of 2.45 g C kg⁻¹ dry soil to silty clay and silt loam soils. Amended soils, placed in serum flasks, were incubated for 42 d with a drying-wetting cycle after 21 d. Evolved CO₂ was measured periodically as well as the water-stable aggregates and soluble sugar and polysaccharide content of the soil. In mucilage-amended soils CO₂ evolution started with a lag phase of 2–3 days, which was not observed in glucose-amended soils. There was then a sharp increase in evolved CO₂ up to day 7. During the second incubation period there were only small differences in evolved C between treatments. Incorporation of mucilage in both soils resulted in a spectacular and immediate increase in soil aggregate stability. Thereafter, the percent of water-stable aggregates quickly decreased parallel to microbial degradation. On completion of the incubation, aggregate stability in the silty clay soil was still significantly higher in the presence of mucilage than in the control. This work supports the assumption that freshly released mucilage is able to stick very rapidly to soil particles and may protect the newly formed aggregates against water destruction. On the silty clay, microbial activity contributes to a stabilization of these established organo-mineral bounds.     

Changes in the Chlorophyll Content and Cytokinin Levels in the Top Three Leaves of New Plant Type Rice During Grain Filling

This paper reports the ways that the differences in leaf senescence are related to grain filling, grain yield, and the dynamics of cytokinins (CKs) in the top three leaves of four field-grown new plant type (NPT) rice, a tropical japonica developed at the International Rice Research Institute, Philippines, to increase the yield potential of rice. The chlorophyll content in leaves decreased from flowering to maturity in all the NPT lines, whereas the grain filling percentage was higher in the fast-senescing NPT line than in slow-senescing NPT line. Grain yield was positively correlated with senescence in the flag leaf. Rapid changes in the CK levels were recorded in the leaves of the fast-senescing line, whereas the CK levels were relatively stable in leaves of the slow-senescing line, suggesting that the dynamics of CKs in the fast-senescing line are vital for fast senescence. There were no significant changes in bioactive CKs, CK O-glucosides (storage CKs), and cis-zeatin derivatives in different leaves of the slow-senescing NPT line between 0 and 3 weeks after flowering, suggesting that the content of these CKs is relatively stable during grain filling. A progressive increase in levels of bioactive CKs was positively correlated with gradual accumulation of CK N-glucosides (inactive CKs) in the top three leaves of the slow-senescing NPT line, whereas the decrease of bioactive CKs in the flag leaf of the fast-senescing line was accompanied by accumulation of CK O-glucosides. These results suggest that there is a higher rate of biosynthesis and/or import of bioactive CKs as well as their turnover which may favor delay of leaf senescence in the slow-senescing NPT line.     

Structure-based substitutions for increased solubility of a designed protein

Manipulation of protein solubility is important for many aspects of protein design and engineering. Previously, we designed a series of consensus ankyrin repeat proteins containing one, two, three and four identical repeats (1ANK, 2ANK, 3ANK and 4ANK). These proteins, particularly 4ANK, are intended for use as a universal scaffold on which specific binding sites can be constructed. Despite being well folded and extremely stable, 4ANK is soluble only under acidic conditions. Designing interactions with naturally occurring proteins requires the designed protein to be soluble at physiological pH. Substitution of six leucines with arginine on exposed hydrophobic patches on the surface of 4ANK resulted in increased solubility over a large pH range. Study of the pH dependence of stability demonstrated that 4ANK is one of the most stable ankyrin repeat proteins known. In addition, analogous leucine to arginine substitutions on the surface of 2ANK allowed the partially folded protein to assume a fully folded conformation. Our studies indicate that replacement of surface-exposed hydrophobic residues with positively charged residues can significantly improve protein solubility at physiological pH.     

Recognition of functional genetic polymorphism using ESE motif definition: a conservative evolutionary approach to CYP2D6/CYP2C19 gene variants

Genetica - Although predicting the effects of variants near intron-exon boundaries is relatively straightforward, predicting the functional Exon Splicing Enhancers (ESEs) and the possible effects...     

D,L-Sulforaphane Loaded Fe3O4@ Gold Core Shell Nanoparticles: A Potential Sulforaphane Delivery System

A novel design of gold-coated iron oxide nanoparticles was fabricated as a potential delivery system to improve the efficiency and stability of d, l-sulforaphane as an anticancer drug. To this purpose, the surface of gold-coated iron oxide nanoparticles was modified for sulforaphane delivery via furnishing its surface with thiolated polyethylene glycol-folic acid and thiolated polyethylene glycol-FITC. The synthesized nanoparticles were characterized by different techniques such as FTIR, energy dispersive X-ray spectroscopy, UV-visible spectroscopy, scanning and transmission electron microscopy. The average diameters of the synthesized nanoparticles before and after sulforaphane loading were obtained ∼ 33 nm and ∼ 38 nm, respectively, when ∼ 2.8 mmol/g of sulforaphane was loaded. The result of cell viability assay which was confirmed by apoptosis assay on the human breast cancer cells (MCF-7 line) as a model of in vitro-cancerous cells, proved that the bare nanoparticles showed little inherent cytotoxicity, whereas the sulforaphane-loaded nanoparticles were cytotoxic. The expression rate of the anti-apoptotic genes (bcl-2 and bcl-x_L), and the pro-apoptotic genes (bax and bak) were quantified, and it was found that the expression rate of bcl-2 and bcl-x_L genes significantly were decreased when MCF-7 cells were incubated by sulforaphane-loaded nanoparticles. The sulforaphane-loaded into the designed gold-coated iron oxide nanoparticles, acceptably induced apoptosis in MCF-7 cells.     

The calcium-free form of atorvastatin inhibits amyloid-β(1–42) aggregation in vitro

Alzheimer''s disease is characterized by the presence of extraneuronal amyloid plaques composed of amyloid-beta (Aβ) fibrillar aggregates in the brains of patients. In mouse models, it has previously been shown that atorvastatin (Ator), a cholesterol-lowering drug, has some reducing effect on the production of cerebral Aβ. A meta-analysis on humans showed moderate effects in the short term but no improvement in the Alzheimer''s Disease Assessment Scale—Cognitive Subscale behavioral test. Here, we explore a potential direct effect of Ator on Aβ42 aggregation. Using NMR-based monomer consumption assays and CD spectroscopy, we observed a promoting effect of Ator in its original form (Ator-calcium) on Aβ42 aggregation, as expected because of the presence of calcium ions. The effect was reversed when applying a CaCO₃-based calcium ion scavenging method, which was validated by the aforementioned methods as well as thioflavin-T fluorescence assays and transmission electron microscopy. We found that the aggregation was inhibited significantly when the concentration of calcium-free Ator exceeded that of Aβ by at least a factor of 2. The ¹H–¹⁵N heteronuclear single quantum correlation and saturation-transfer difference NMR data suggest that calcium-free Ator exerts its effect through interaction with the ¹⁶KLVF¹⁹ binding site on the Aβ peptide via its aromatic rings as well as hydroxyl and methyl groups. On the other hand, molecular dynamics simulations confirmed that the increasing concentration of Ator is necessary for the inhibition of the conformational transition of Aβ from an α-helix-dominant to a β-sheet-dominant structure.     

Theoretical investigations on the mechanistic pathway of the thermal rearrangement of substituted N-acyl-2,2-dimethylaziridines

The mechanism of the thermal rearrangement of substituted N-acyl-2,2-dimethylaziridines 1 has been studied using quantum chemistry methods. Geometries of reactants, transition states and products have been optimized at the B3LYP/6-311++G(2d,2p) level. Relative energies for various stationary points have been determined and reaction identified by IRC calculations. The results show that thermal rearrangements occur in three ways. Firstly, the transition state TS ₁ in which a hydrogen atom of methyl groups migrates from primary carbon to oxygen of amid group to give the N-methallylamide 2. The second is via the transition state TS ₂ in which the attack of oxygen to the tertiary carbon yields the oxazoline 3. The third is via the transition state TS ₃ in which a hydrogen migrate from the secondary carbon to oxygen to give the vinylamide 4. In order to get insights into the factors determining the exact nature of its interactions with electrophiles, the application of reactivity parameters derived from density functional theory in a local sense, in particular the softness and Fukui function, to interpret and predict the mechanisms of the thermal decomposition of the N-acyl-2,2-dimethylaziridines 1, has been discussed.