A New Electrolyte Formulation for Securing High Temperature Cycling and Storage Performances of Na‐Ion Batteries

The Na‐ion battery is recognized as a possible alternative to the Li‐ion battery for applications where power and cost override energy density performance. However, the increasing instability of their electrolyte with temperature is still problematic. Thus, a central question remains how to design Na‐based electrolytes. Here, the discovery of a Na‐based electrolyte formulation is reported which enlists four additives (vinylene carbonate, succinonitrile, 1,3‐propane sultone, and sodium difluoro(oxalate)borate) in proper quantities that synergistically combine their positive attributes to enable a stable solid electrolyte interphase at both negative and positive electrodes surface at 55 °C. Moreover, the role of each additive that consists in producing specific NaF coatings, thin elastomers, sulfate‐based deposits, and so on via combined impedance and X‐ray photoelectron spectroscopy is rationalized. It is demonstrated that empirical electrolyte design rules previously established for Li‐ion technology together with theoretical guidance is vital in the quest for better Na‐based electrolytes that can be extended to other chemistries. Overall, this finding, which is implemented to 18 650 cells, widens the route to the rapid development of the Na‐ion technology based on Na₃V₂(PO₄)₂F₃/C chemistry.     

Flow cytometry controls, instrument setup, and the determination of positivity.

A frequent goal of flow cytometric analysis is to classify cells as positive or negative for a given marker, or to determine the precise ratio of positive to negative cells. This requires good and reproducible instrument setup, and careful use of controls for analyzing and interpreting the data. The type of controls to include in various kinds of flow cytometry experiments is a matter of some debate and discussion. In this tutorial, we classify controls in various categories, describe the options within each category, and discuss the merits of each option.     

Inheritance of resistance to potato y viruses in Phaseolus vulgaris L

Summary Resistance to watermelon mosaic virus-2 in Phaseolus vulgaris L. is conferred by two distinct dominant alleles at independent loci. Based on segregation data one locus is designated Wmv, the other, Hsw. The dominant allele Wmv from cv. Great Northern 1140 prevents systemic spread of the virus but viral replication occurs in inoculated tissue. In contrast, Hsw confers both local and systemic resistance to WMV-2 below 30C. At higher temperatures, plants that carry this allele in the absence of modifying or epistatic factors develop systemic veinal necrosis upon inoculation with the virus that results in rapid death. Patho-type specificity has not been demonstrated for either allele; both factors confer resistance to every isolate tested. A temperature-sensitive shift in epistasis is apparent between dominant alleles at these loci. Because Hsw is very tightly linked if not identical to the following genes for hypersensitivity to potyviruses I, (bean common mosaic virus), Bcm, (blackeye cowpea mosaic virus), Cam, (cowpea aphid-borne mosaic virus) and Hss (soybean mosaic virus), parental, reciprocal dihybrid F₁ populations, and selected F₃ families were inoculated with each of these viruses and held at 35 C. F₁ populations developed vascular necrosis completely or primarily limited to inoculated tissue, while F₃ families from WMV-2-susceptible segregates were uniformly susceptible to these viruses. The relationship between Hsw, Wmv and other genes for potyvirus resistance suggest patterns in the evolution of resistance and viral pathogenicity. Characterization of the resistance spectrum associated with each factor provides an additional criterion to distinguish genes for plant virus resistance.     

Voltage gating in VDAC is markedly inhibited by micromolar quantities of aluminum

Summary The mitochondrial outer membrane contains voltagegated channels called VDAC that are responsible for the flux of metabolic substrates and metal ions across this membrane. The addition of micromolar quantities of aluminum chloride to phospholipid membranes containing VDAC channels greatly inhibits the voltage dependence of the channels' permeability. The channels remain in their high conducting (open) state even at high membrane potentials. An analysis of the change in the voltage-dependence parameters revealed that the steepness of the voltage dependence decreased while the voltage needed to close half the channels increased. The energy difference between the open and closed states in the absence of an applied potential did not change. Therefore, the results are consistent with aluminum neutralizing the voltage sensor of the channel. pH shift experiments showed that positively charged aluminum species in solution were not involved. The active form was identified as being either (or both) the aluminum hydroxide or the tetrahydroxoaluminate form. Both of these could reasonably be expected to neutralize a positively charged voltage sensor. Aluminum had no detectable effect of either single-channel conductance or selectivity, indicating that the sensor is probably not located in the channel proper and is distinct from the selectivity filter.     

Slow- and fast-binding inhibitors of thermolysin display different modes of binding: crystallographic analysis of extended phosphonamidate transition-state analogues

The modes of binding to thermolysin of two phosphonamidate peptide inhibitors, carbobenzoxy-GlyP-L-Leu-L-Leu (ZGPLL) and carbobenzoxy-L-PheP-L-Leu-L-Ala (ZFPLA), have been determined by X-ray crystallography and refined at high resolution to crystallographic R-values of 17.7% and 17.0%, respectively. (GlyP is used to indicate that the trigonal carbon of the peptide linkage is replaced by the tetrahedral phosphorus of a phosphonamidate group.). These inhibitors were designed to be structural analogues of the presumed catalytic transition state and are potent inhibitors of thermolysin (ZGPLL, Ki = 9.1 nM; ZFPLA, Ki = 0.068 nM) [Bartlett, P. A., & Marlowe, C. K. (1987) Biochemistry (following paper in this issue)]. ZFPLA binds to thermolysin in the manner expected for the transition state and, for the first time, provides direct support for the presumed mode of binding of extended substrates in the S2 subsite. The mode of binding of ZFPLA displays all the interactions that are presumed to stabilize the transition state and supports the postulated mechanism of catalysis [Hangauer, D. G., Monzingo, A. F., & Matthews, B. W. (1984) Biochemistry 23, 5730-5741]. The two oxygens of the phosphonamidate moiety are liganded to the zinc to give overall pentacoordination of the metal. For the second inhibitor the situation is different. Although both ZFPLA and ZGPLL have similar modes of binding in the S1' and S2' subsites, the configurations of the carbobenzoxy-Phe and carbobenzoxy-Gly moieties are different. For ZFPLA the carbonyl group of the carbobenzoxy group is hydrogen bonded directly to the enzyme, whereas in ZGPLL the carbonyl group is rotated 117 degrees, and there is a water molecule interposed between the inhibitor and the enzyme. For ZGPLL only one of the phosphonamidate oxygens is liganded to the zinc. Correlated with the change in inhibitor-zinc ligation from monodentate in ZGPLL to bidentate in ZFPLA there is an increase in the phosphorus-nitrogen bond length of about 0.25 A, strongly suggesting that the phosphonamide nitrogen in ZFPLA is cationic, analogous to the doubly protonated nitrogen of the transition state. The observation that the nitrogen of ZFPLA appears to donate two hydrogen bonds to the protein also indicates that it is cationic. The different configurations adopted by the respective inhibitors are correlated with large differences in their kinetics of binding [Bartlett, P. A., & Marlowe, C. K. (1987) Biochemistry (following paper in this issue)]. These differences in kinetics are not associated with any significant conformational change on the part of the enzyme.(ABSTRACT TRUNCATED AT 250 WORDS)     

Rat liver beta-glucuronidase. cDNA cloning, sequence comparisons and expression of a chimeric protein in COS cells.

A cDNA for rat liver beta-glucuronidase was isolated, its sequence determined and its expression after transfection into COS cells studied. The deduced amino acid sequence of the rat liver clone showed 77% homology with that from the cDNA for human placental beta-glucuronidase and 47% homology with that deduced from the cDNA for Escherichia coli beta-glucuronidase. Several differences were found between the cDNA from rat liver and that previously reported from rat preputial gland. Only one change leads to an amino acid difference in the mature enzyme. A chimeric clone was constructed by using a fragment encoding the first 18 amino acid residues of the signal sequence from the human placental cDNA clone and a fragment from the rat clone encoding four amino acid residues of the signal sequence, all 626 amino acid residues of the mature rat enzyme, and all of the 3' untranslated region. After transfection into COS cells the chimeric clone expressed beta-glucuronidase activity that was specifically immunoprecipitated by antibody to rat beta-glucuronidase. The Mr value of 76,000 of the expressed gene product was characteristic of the glycosylated rat enzyme. It was proteolytically processed in COS cells to Mr 75,000 6 h after metabolic labelling. At least 50% of the expressed enzyme was secreted at 60 h post-transfection, but the secreted enzyme did not undergo proteolytic processing. These results provide evidence that the partial cDNA isolated from a rat liver library contains the complete coding sequence for the mature rat liver enzyme and that the chimeric signal sequence allows normal biosynthesis and processing of the transfected rat liver enzyme in COS cells.