Construction of integrated system for selection of fused plant protoplasts

Summary An integrated system has been constructed to instantly identify and efficiently sort the heterokaryons formed by plant protoplast fusion. The system is composed of the following functions: a) a transport system, b) an electro-manipulator, c) a cell harvester, d) a flow cytometer/cell sorter, and e) a control device. The conditions for an efficient and reproducible enrichment of the heterokaryons have been investigated by this system using the fluorescein isothiocyanate stained protoplasts preparing from Glycyrrhiza glabra cell cultures and unstained protoplasts of Abrus precatorius cell cultures which contain a large quantity of chlorophyll.Abbreviations MS Murashige and Skoog (1962) - 2,4-D 2, 4-dichlorophenoxyacetic acid - NAA 1-naphthaleneacetic acid - BAP 6-benzylaminopurine - ABA abscissic acid - FITC fluorescein isothiocyanate This paper is part 96 in the series Studies on Plant Tissue Cultures. For part 95 see Orinara Y., Noguchi T. and Furuya T. (1993) submitted for publication.     

Analysis of the Relationship between Cellular Thymidine Kinase Activity and Virulence of Thymidine Kinase-Negative Herpes Simplex Virus Types 1 and 2

The virulence of thymidine kinase-negative herpes simplex virus type 1 (HSV-1; VRTK^? strain) and type 2 (HSV-2; UWTK^? strain) was studied in comparison with that of their parental strains (VR-3 and UW-268, respectively) in an encephalitis model of adult (4-week-old) and newborn (3-day-old) mice. Viral thymidine kinase (TK) activity was essential for the maximum expression of virulence of HSV-1, because the 50% lethal dose (LD₅₀) of VRTK^? was 60 times higher than that of VR-3 in the brains of newborn mice expressing high levels of cellular TK activity. However, the UWTK^? strain showed the same virulence as the parental strain in newborn mice, despite the lack virulence in adults, suggesting that replication of the UWTK^? strain was completely supported by cellular TK activity. This difference in the role of viral and cellular TKs for virus growth between HSV-1 and HSV-2 was confirmed with the one-step growth of virus strains in L-M and L-M(TK^?) cells.     

Acid-stable α-Amylase of Black Aspergilli

Some general properties of the acid-stable dextrinizing amylase of black Aspergillus were investigated comparing with those of Taka-amylase A. The mode of action on starch of this amylase was quite similar to that of Taka-amylase A. Saccharifying degree at red point in starch-iodine color reaction was 5.1% and the limit of starch saccharification was a little over 40 per cent calculated as glucose with both amylases. Maltase activity was absent. Degradation products in the course of starch hydrolysis were also quite similar and they mutarotated downward. So this amylase was decided to be α-type. Thermal stability of the acid-stable α-amylase was higher than that of Taka-amylase A. Its acid stability was much higher than that of Taka-amylase A. Taka-amylase A was inactivated completely at pH 2.2, 37°C, for 30 min, but the acid-stable α-amylase retained 87% of its original activity.

From the amylase preparation of black Aspergillus acid-stable α-amylase and acidunstable α-amylase were separated by gel filtration on sephadex G-100 column. From the acid-unstable α-amylase fraction this enzyme was purified by fractionations with rivanol and acetone, and finally obtained as a homogeneous protein after gel filtration with sephadex G-50. Comparison of some general properties between the two α-amylases was carried out. Catalytic action was quite similar with both enzymes, but dextrinizing unit per mg enzyme protein of the acid-unstable α-amylase was about 5.6 times as large as that of the acid-stable α-amylase. The acid-unstable α-amylase was less heat-stable than the acid-stable α-amylase. Acid stability and pH-activity curve were compared with both α-amylases. High stability of the acid-stable α-amylase in acidic condition was observed, but, in alkaline range, it was more sensitive than the acid-unstable α-amylase.     

Saikosaponin-d,a novel SERCA inhibitor,induces autophagic cell death in apoptosis-defective cells

Autophagy is an important cellular process that controls cells in a normal homeostatic state by recycling nutrients to maintain cellular energy levels for cell survival via the turnover of proteins and damaged organelles. However, persistent activation of autophagy can lead to excessive depletion of cellular organelles and essential proteins, leading to caspase-independent autophagic cell death. As such, inducing cell death through this autophagic mechanism could be an alternative approach to the treatment of cancers. Recently, we have identified a novel autophagic inducer, saikosaponin-d (Ssd), from a medicinal plant that induces autophagy in various types of cancer cells through the formation of autophagosomes as measured by GFP-LC3 puncta formation. By computational virtual docking analysis, biochemical assays and advanced live-cell imaging techniques, Ssd was shown to increase cytosolic calcium level via direct inhibition of sarcoplasmic/endoplasmic reticulum Ca²⁺ ATPase pump, leading to autophagy induction through the activation of the Ca²⁺/calmodulin-dependent kinase kinase–AMP-activated protein kinase–mammalian target of rapamycin pathway. In addition, Ssd treatment causes the disruption of calcium homeostasis, which induces endoplasmic reticulum stress as well as the unfolded protein responses pathway. Ssd also proved to be a potent cytotoxic agent in apoptosis-defective or apoptosis-resistant mouse embryonic fibroblast cells, which either lack caspases 3, 7 or 8 or had the Bax-Bak double knockout. These results provide a detailed understanding of the mechanism of action of Ssd, as a novel autophagic inducer, which has the potential of being developed into an anti-cancer agent for targeting apoptosis-resistant cancer cells.     

Fission Yeast Germinal Center (GC) Kinase Ppk11 Interacts with Pmo25 and Plays an Auxiliary Role in Concert with the Morphogenesis Orb6 Network (MOR) in Cell Morphogenesis

How cell morphology and the cell cycle are coordinately regulated is a fundamental subject in cell biology. In fission yeast, 2 germinal center kinases (GCKs), Sid1 and Nak1, play an essential role in septation/cytokinesis and cell separation/cell polarity control, respectively, as components of the septation initiation network (SIN) and the morphogenesis Orb6 network (MOR). Here we show that a third GCK, Ppk11, is also required for efficient cell separation particularly, at a high temperature. Although Ppk11 is not essential for cell division, this kinase plays an auxiliary role in concert with MOR in cell morphogenesis. Ppk11 physically interacts with the MOR component Pmo25 and is localized to the septum, by which Ppk11 is crucial for Pmo25 targeting/accumulation to the septum. The conserved C-terminal WDF motif of Ppk11 is essential for both septum accumulation of Pmo25 and efficient cell separation. In contrast its kinase activity is required only for cell separation. Thus, both interaction of Ppk11 with Pmo25 and Ppk11 kinase activity are critical for efficient cell separation.     

Improving conditional random field model for prediction of protein-RNA residue-base contacts

Background: For understanding biological cellular systems, it is important to analyze interactions between protein residues and RNA bases. A method based on conditional random fields (CRFs) was developed for predicting contacts between residues and bases, which receives multiple sequence alignments for given protein and RNA sequences, respectively, and learns the model with many parameters involved in relationships between neighboring residue-base pairs by maximizing the pseudo likelihood function. Methods: In this paper, we proposed a novel CRF-based model with more complicated dependency relationships between random variables than the previous model, but which takes less parameters for the sake of avoidance of overfitting to training data. Results: We performed cross-validation experiments for evaluating the proposed model, and took the average of AUC (area under receiver operating characteristic curve) scores. The result suggests that the proposed CRF-based model without using L₁-norm regularization (lasso) outperforms the existing model with and without the lasso under several input observations to CRFs. Conclusions: We proposed a novel stochastic model for predicting protein-RNA residue-base contacts, and improved the prediction accuracy in terms of the AUC score. It implies that more dependency relationships in a CRF could be controlled by less parameters.     

A comparison of the peri-implant bone stress generated by the preload with screw tightening between ‘bonded’ and ‘contact’ model

A number of finite element analyses (FEAs) for the dental implant were performed without regard for preload and with all interfaces ‘fixed-bonded’. The purpose of this study was comparing the stress distributions between the conventional FEA model with all contacting interfaces ‘fixed-bonded’ (bonded model) and the model with the interfaces of the components in ‘contact’ with friction simulated as a preloaded implant (contact model). We further verified the accuracy of the result of the FEA using model experiment. In the contact model, the stress was more widely distributed than in the bonded model. From the model study, the preload induced by screw tightening generated strain at the peri-implant bone, even before the application of external force. As a result, the bonded model could not reproduce the mechanical phenomena, whereas the contact model is considered to be appropriate for analysing mechanical problems.